Freud Blades

Fitments

Materials: Hardwoods
Softwood
Coated Chipboard
Chipboard
MDF
Plywood
Non-Ferrous metals
High Finish Mitre
Plexiglass
Premium or Exotic Hardwoods

Diameter: 180
200
250
300
350
150
220
330
400
303
450
500

Cutting: Cross Grain Cutting
Laminated panels
Plastics
High finish
Thin kerf ripping
Ripping and Cross cutting

Portable: 0

Width: 2.00
2.20
2.50
2.70
3.00
3.20
3.50
3.80
4.00
2.80
4.20

Teeth: 56
64
80
96
108
Circular Saw 80 t.c. teeth
Circular Saw 96 t.c. teeth
48
Circular Saw 64 t.c. teeth
120
42
Circular Saw 48 t.c. teeth
60
104
72
84
128
140
88
Circular Saw 60 t.c. teeth
Circular Saw 72 t.c. teeth
112
30
36
40
100
Circular Saw 100 t.c. teeth
Circular Saw 120 t.c. teeth
24
28
Circular Saw 28 t.c. teeth
22
Circular Saw 24 t.c. teeth
26
34
Circular Saw 40 t.c. teeth
54
66
Circular Saw 54 t.c. teeth

Bore: 40
30
20
35
32
25
3
70

Application: Premium or exotic wood cross cutting
Coated chipboard
Plastics
Softwood & hardwood cross cutting
Raw chipboard
Plywood
Coated MDF
Non-ferrous metals
Double side laminated chipboard
High finish mitre
Softwood & hardwood ripping
Premium or exotic wood ripping

Additional Features: Low Noise
Perma-Shield
Anti-Kickback

Usage: Thin kerf indust. Blade, alternate bevel tooth. Excellent finish when cutting hardwoods upto 55mm, 1 sided laminate panels to 40mm. Medium finish when cutting formica sheets and pvc upto 10mm. Thin kerf less power used.
Industrial blade, alternate bevel tooth. Excellent finish when cutting hardwoods up to 60mm, 1 sided laminate panels to 40mm. Medium finish when cutting formica sheets and pvc upto 10mm.
Cross Cutting blade with alternative bevel teeth. Excellent finish on hard woods up to 60mmans single sided laminates uptp 40mm.
Industrial cross cutting blade with alternative bevel teeth. Excellent finish on hard woods up to 60mmans single sided laminates uptp 40mm.
Triple Chip saw blade for cutting laminated panels, chipboard and plywood upto 30mm.
Industrial triple chip saw blade for cutting laminated panels, chipboard and plywood upto 30mm.
Alternative bevel saw blade for cutting double sided laminated panels. Laser cut for low noise. Not suitable to cut plywood.
Industrial alternative bevel saw blade for cutting double sided laminated panels. Laser cut for low noise. Not suitable to cut plywood.
Industrial triple chip tooth saw blade for cutting laminated panels.Leaves an excellent finish and features noise reduction slots.
Industrial triple chip tooth saw blade for cutting non ferrous metals with a wall thickness yp tp 3mm.This blade comes with 2 pin holes 11mm dia. At PCD 63mm.
Triple chip blade with Perma Shield coated body for cutting double faced laminate chipboard without chipping.
Industrial triple chip blade with Perma Shield coated body for cutting double faced laminate chipboard without chipping.
Alternate bevel toothed blade for Cross Cutting of picture frames coated with delicate and abrasive materials even at 45 deg. A special blade with a Perma Shield coat
Triple chip saw blade for cutting plastic materials and plexiglas. The blade is designed with a negative hook angle and special grade carbide to give a perfect finish without melting or scratching. The blade must work30mm above the materila cut.
Thin kerf indust. blade giving an excellent finish cross cutting hard and soft woods up to 70mm. Max cutting thickness for ripping40mm..Also used for single or multiple chipboard panels.
Thin kerf indust. Blade, alternate bevel blade giving an excellent finish cross cutting hardwoods up to 30mm and for sizing chipboard, plywood and 1 sided laminate panels.
An alternate bevel rip saw blade for soft and hardwoods with anti kickback design , giving a medium finish.
Industrial alternative bevel saw blade with Perma Shield and anti kick back teeth for ripping soft and hardwoods with loose knots.
Alternate bevelled tooth industrial blade for ripping soft and hardwoods upto 60mmgiving a medium finish.will cut 60-100mmon single or multiple chipboard panels.
Alternate bevelled tooth industrial blade for Alternate bevel toothed blade for ripping and cross cutting solid wood upto 40mm and 45mm respectively in softwoods and hardwoods. Maximum cut of 40mm in composites. Will give a good finish. Thin kerf requires
Industrial quality alternative bevel saw blade for cross and rip cutting of hard and softwoods upto 50mm , or multiple chipboard upto 60mm with good finish.
Industrial fine finsh blade with alternate bevel teeth. Will cross cut soft, hardwoods and chipboard upto 60mm with an excellent finish.

Size: 250mm x 2.5mm x 30mm
300mm x 2.7mm x 30mm
200mm x 3.2mm x 30mm
250mm x 3.2mm x 30mm
300mm x 3.2mm x 30mm
250mm x 3.5mm x 30mm
300mm x 3.5mm x 30mm
300mm x 3mm x 30mm
250mm x 3.0mm x 30mm
250mm x 2.8mm x 30mm
300mm x 2.8mm x 30mm
250mm x 2.6mm x 30mm
250mm x 2.7mm x 30mm
200mm x 2.2mm x 30mm

Alternate Part No.: F03FS04957
F03FS04959
F03FS04915
F03FS04922
F03FS04927
F03FS05081
F03FS05088
F03FS05093
F03FS05061
F03FS05064
F03FS05071
F03FS05295
F03FS05301
F03FS05111
F03FS05113
F03FS04682
F03FS04679
F03FS05163
F03FS05165
F03FS04657
F03FS04663
F03FS04924
F03FS04932
F03FS04634
F03FS04590
F03FS04830
F03FS04840
F03FS04655
F03FS04659
F03FS04877
F03FS04884
F03FS04873
F03FS04880
F03FS04948

See below all the products that this product will fit:


Freud Freud Blades
Q&A's

Question & answer’s...

There has been no questions asked about this product. Ask new questions in the form below

Can't find the question you're looking for?

Ask your own using the form below.

*
*
*
Our Price
Availability:Out of stock

UK Next day delivery service available

Despatched same day on orders place before 2pm.

Price match promise on this product

Find it cheaper elsewhere in the UK and we will match it.
By continuing to browse this website you agree to our use of cookiesAccept