Makita 3612BR - 3612BR
spares and accessories

Trend C152X1/4TC

Biscuit jointer set

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

Grade: TCT

Shank Diameter: 1/4

Bearing Dia Metric: 12.7

Nett Weight: 63

Size: 1/4" Shank

Cut Length Metric: 4

Dia Metric: 37.2

Qty Add

Trend TR35X1/4TC

Biscuit jointer set

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

Grade: TCT

Shank Diameter: 1/4

Bearing Dia Metric: 12.7

Nett Weight: 58

Size: 1/4" Shank

Cut Length Metric: 4

Dia Metric: 37.2

Dia Imperial: 29/64

Qty Add

Wolf / Kango 04001 (CB-152)

Brush

Carbon brushes (PAIR) May go by part no's CB-153 CB-154 Dimensions 6.5x13.5x16.

Qty Add

Makita 643650-4

BRUSH HOLDER CAP CB-5/HS6100

Brush Holder Cap(CB5/9402)17mm Dia located on outside of machine for access to brush

Qty Add

Trend TR22X1/4TC

Chamfer V groove cutter angle=45 degrees

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

Dia Imperial: 1/2

Grade: TCT

Nett Weight: 16

Angle: 45

Dia Metric: 12.7

Shank Diameter: 1/4

Size: 1/4" Shank

Qty Add

Trend C041AX1/4TC

Dovetail cutter angle=104 degrees 12.7mm diameter

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

Dia Imperial: 1/2

Grade: TCT

Dia Metric: 12.7

Cut Length Metric: 12.7

Shank Diameter: 1/4

Nett Weight: 14

Cut Length Imperial: 1/2

Angle: 104

Size: 1/4" Shank

Qty Add

Trend TR33X1/4TC

Guided chamfer angle=45 degrees x 31.8mm

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

Grade: TCT

Angle: 45

Nett Weight: 36

Shank Diameter: 1/4

Dia Imperial: 1 1/4

Bearing Dia Metric: 9.5

Size: 1/4" Shank

Dia Metric: 31.8

Qty Add

Trend TR32X1/4TC

Guided ovolo over 9.5mm radius

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

Grade: TCT

Shank Diameter: 1/4

Radius 1 Metric: 9.5

Dia Metric: 31.7

Bearing Dia Metric: 9.5

Nett Weight: 58

Size: 1/4" Shank

Qty Add

Trend TR31X1/4TC

Guided ovolo round over cutter 6.35mm radius

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

Grade: TCT

Dia Metric: 25.4

Shank Diameter: 1/4

Dia Imperial: 1

Nett Weight: 43

Radius 1 Metric: 6.3

Bearing Dia Metric: 9.5

Size: 1/4" Shank

Qty Add

Trend TR29X1/4TC

Guided profiler

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

Dia Imperial: 1/2

Grade: TCT

Dia Metric: 12.7

Shank Diameter: 1/4

Nett Weight: 32

Cut Length Imperial: 1

Cut Length Metric: 25.4

Size: 1/4" Shank

Qty Add

Trend TR30X1/2TC

Guided profiler

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

Grade: TCT

Shank Diameter: 1/2

Dia Imperial: 3/4

Nett Weight: 112

Dia Metric: 19.1

Cut Length Metric: 50

Size: 1/4" Shank

Qty Add

Trend TR26X1/4TC

Guided trimmer 12.7mm diameter x 25.4

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

Dia Imperial: 1/2

Grade: TCT

Dia Metric: 12.7

Shank Diameter: 1/4

Nett Weight: 32

Cut Length Imperial: 1

Cut Length Metric: 25.4

Size: 1/4" Shank

Qty Add

Trend TR28X1/2TC

Guided trimmer 12.7mm x50mm

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

Dia Imperial: 1/2

Grade: TCT

Dia Metric: 12.7

Shank Diameter: 1/4

Nett Weight: 80

Cut Length Metric: 50

Size: 1/4" Shank

Qty Add

Trend C168X1/4TC

Guided trimmer 6.35mm diameter x 25.4mm

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

Grade: TCT

Nett Weight: 16

Dia Imperial: 1/4

Shank Diameter: 1/4

Cut Length Imperial: 1

Cut Length Metric: 25.4

Size: 1/4" Shank

Angle: 90

Dia Metric: 6.35

Bearing Dia Metric: 6.35

Qty Add

Trend TR23X1/4TC

Guided trimmer 6.35mm x 12.7

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

Grade: TCT

Dia Imperial: 1/4

Cut Length Metric: 12.7

Shank Diameter: 1/4

Nett Weight: 12

Cut Length Imperial: 1/2

Size: 1/4" Shank

Dia Metric: 6.35

Qty Add

Trend TR24X1/4TC

Guided trimmer 6.3mm diameter x 25.4

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

Grade: TCT

Nett Weight: 16

Dia Imperial: 1/4

Shank Diameter: 1/4

Cut Length Imperial: 1

Cut Length Metric: 25.4

Size: 1/4" Shank

Dia Metric: 6.35

Qty Add

Trend TR25X1/4TC

Guided trimmer 9.5mm diameter x 12.7

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

Grade: TCT

Dia Imperial: 3/8

Cut Length Metric: 12.7

Shank Diameter: 1/4

Dia Metric: 9.5

Nett Weight: 17

Cut Length Imperial: 1/2

Size: 1/4" Shank

Qty Add

Trend TR27X1/4TC

Guided trimmer triple fluted 12.7X25.4

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

Dia Imperial: 1/2

Grade: TCT

Dia Metric: 12.7

Shank Diameter: 1/4

Nett Weight: 32

Cut Length Imperial: 1

Cut Length Metric: 25.4

Size: 1/4" Shank

Qty Add

Trend C209X1/4TC

Intumescent cutter set 10mm x 24mm

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

Grade: TCT

Dia Metric: 24

Shank Diameter: 1/4

Nett Weight: 42

Cut Length Metric: 10

Bearing Dia Metric: 16

Size: 1/4" Shank

Qty Add

Trend C220X1/4TC

Intumescent cutter set 15mm x 24mm

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

Grade: TCT

Cut Length Metric: 15

Dia Metric: 24

Shank Diameter: 1/4

Nett Weight: 55

Bearing Dia Metric: 16

Size: 1/4" Shank

Qty Add

Trend TR21X1/4TC

Radius 5mm radius and 18mm diameter

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Grade: TCT

Nett Weight: 16

Shank Diameter: 1/4

Cut Length Metric: 18

Radius 1 Metric: 5

Size: 1/4" Shank

Qty Add

Trend C076X1/4TC

Rounding over 6.3mm radius x 12.7mm cut

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

Grade: TCT

Dia Metric: 25.4

Cut Length Metric: 12.7

Shank Diameter: 1/4

Dia Imperial: 1

Nett Weight: 42

Radius 1 Metric: 6.3

Cut Length Imperial: 1/2

Bearing Dia Metric: 9.5

Size: 1/4" Shank

Qty Add

Trend C078X1/4TC

Rounding over 9.5mm radius x 15.9mm cut

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

Grade: TCT

Shank Diameter: 1/4

Radius 1 Metric: 9.5

Cut Length Metric: 15.9

Dia Metric: 31.7

Bearing Dia Metric: 9.5

Nett Weight: 58

Size: 1/4" Shank

Cut Length Imperial: 5/8

Qty Add

Trend C121BX1/4TC

Router Cutter

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

Size: 1/4" Shank

Qty Add

Trend C049X1/4TC

Self guided chamfer angle=45 degrees x 12.7mm Cut

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

Grade: TCT

Dia Metric: 32

Angle: 45

Cut Length Metric: 12.7

Shank Diameter: 1/4

Nett Weight: 44

Cut Length Imperial: 1/2

Bearing Dia Metric: 9.5

Size: 1/4" Shank

Qty Add

Trend C116X1/4TC

Self guided trimmer 12.7mm diameter

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

Dia Imperial: 1/2

Grade: TCT

Dia Metric: 12.7

Shank Diameter: 1/4

Bearing Dia Metric: 12.7

Cut Length Imperial: 1

Nett Weight: 37

Cut Length Metric: 25.4

Size: 1/4" Shank

Angle: 90

Qty Add

Trend C121X1/4TC

Template profile 12.7mm diameter

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

Dia Imperial: 1/2

Grade: TCT

Dia Metric: 12.7

Shank Diameter: 1/4

Nett Weight: 33

Cut Length Imperial: 1

Cut Length Metric: 25.4

Size: 1/4" Shank

Qty Add

Trend C016X1/4TC

Two flute cutter 10mm diameter

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

Grade: TCT

Nett Weight: 16

Shank Diameter: 1/4

Dia Metric: 10

Cut Length Imperial: 3/4

Dia Imperial: 25/64

Size: 1/4" Shank

Cut Length Metric: 19.1

Qty Add

Trend C022X1/4TC

Two flute cutter 12.7mm diameter

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

Dia Imperial: 1/2

Grade: TCT

Dia Metric: 12.7

Shank Diameter: 1/4

Nett Weight: 32

Size: 1/4" Shank

Cut Length Imperial: 1 1/4

Cut Length Metric: 31.8

Qty Add

Trend C019AX1/4TC

Two flute cutter 12mm diameter

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

Grade: TCT

Cut Length Metric: 19

Shank Diameter: 1/4

Dia Metric: 12

Nett Weight: 22

Cut Length Imperial: 3/4

Dia Imperial: 15/32

Size: 1/4" Shank

Qty Add

Trend C019X1/4TC

Two flute cutter 12mm diameter

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

Grade: TCT

Shank Diameter: 1/4

Dia Metric: 12

Nett Weight: 19

Cut Length Imperial: 3/4

Dia Imperial: 15/32

Size: 1/4" Shank

Cut Length Metric: 19.1

Qty Add

Trend C024AX1/4TC

Two flute cutter 15.0mm diameter

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

Grade: TCT

Cut Length Metric: 25

Shank Diameter: 1/4

Nett Weight: 31

Dia Metric: 15

Size: 1/4" Shank

Dia Imperial: 19/32

Cut Length Imperial: 63/64

Qty Add

Trend TR19X1/4TC

Two flute cutter 15.9mm diameter

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

Grade: TCT

Cut Length Metric: 19

Dia Imperial: 5/8

Shank Diameter: 1/4

Nett Weight: 28

Dia Metric: 15.9

Size: 1/4" Shank

Qty Add

Trend TR40DX1/4TC

Two flute cutter 15mm diameter

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

Nett Weight: 24

Grade: TCT

Cut Length Metric: 25

Shank Diameter: 1/4

Dia Metric: 15

Size: 1/4" Shank

Qty Add

Trend TR20X1/4TC

Two flute cutter 19.1mm diameter

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

Grade: TCT

Cut Length Metric: 25

Shank Diameter: 1/4

Dia Imperial: 3/4

Nett Weight: 40

Dia Metric: 19.1

Size: 1/4" Shank

Qty Add

Trend C030AX1/4TC

Two flute cutter 20.0mm diameter

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

Grade: TCT

Shank Diameter: 1/4

Nett Weight: 42

Dia Metric: 20

Cut Length Metric: 20

Size: 1/4" Shank

Qty Add

Trend C001BX1/4TC

Two flute cutter 3.2mm diameter

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

Grade: TCT

Cut Length Metric: 12.7

Shank Diameter: 1/4

Nett Weight: 11

Dia Metric: 3.2

Cut Length Imperial: 1/2

Dia Imperial: 1/8

Size: 1/4" Shank

Qty Add

Trend C001AX1/4TC

Two flute cutter 3mm diameter

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

Grade: TCT

Shank Diameter: 1/4

Nett Weight: 11

Cut Length Metric: 9.5

Cut Length Imperial: 3/8

Dia Metric: 3

Size: 1/4" Shank

Qty Add

Trend C007X1/4TC

Two flute cutter 6.3mm diameter

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

Grade: TCT

Dia Imperial: 1/4

Nett Weight: 13

Shank Diameter: 1/4

Dia Metric: 6.3

Cut Length Imperial: 3/4

Size: 1/4" Shank

Cut Length Metric: 19.1

Qty Add

Trend C008X1/4TC

Two flute cutter 6.3mm diameter

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

Grade: TCT

Dia Imperial: 1/4

Shank Diameter: 1/4

Nett Weight: 14

Dia Metric: 6.3

Cut Length Imperial: 1

Cut Length Metric: 25.4

Size: 1/4" Shank

Qty Add

Trend C012AX1/4TC

Two flute cutter 8.0mm diameter

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

Grade: TCT

Dia Metric: 8

Cut Length Metric: 25

Shank Diameter: 1/4

Nett Weight: 17

Size: 1/4" Shank

Qty Add