Trend
Radius cutter 6.3mm radius - 12/6X8MMHSS
These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications. For coves and part of a rule joint.
D=1/2 inch
D=12.7 mm
C=19 mm
Overall length=45 mm
R=6.3 mm
Shank Diameter=8mm
Includes: