0 601 608 434 Spares and Parts for BOSCH INDUSTRIAL ROUTER 1608 LX (ROUTERS)

Ref:	Part Number:	Description	Price
1	3 605 108 573	Motor Housing	£11.64
2	1 604 220 196	Field	£14.43
3	3 604 011 579	Armature	£117.30
3/60	3 606 610 514	Fan	£0.00	Contact Us
5	2 610 908 032	Deep-groove Ball Bearing	£5.15
6	3 603 311 521	Hex Nut	£2.45
7	3 605 702 573	Bearing Housing	£15.87
8	1 900 905 018	Deep-groove Ball Bearing	£13.58
9	3 600 150 501	Spring Lock Washer	£1.00
10	3 604 460 534	Power Supply Cord	£9.91
11	2 600 703 013	Grommet	£2.33
12	2 601 035 001	Cable Clip	£1.00
13	3 607 200 511	On-off Switch	£9.91
13	1 607 200 067	On-off Switch	£43.16
13	2 607 200 199	Switch	£14.75	NOT AVAILABLE
14	3 604 441 501	Connecting Cable	£2.00
15	3 604 441 509	Connecting Cable	£2.78
16	2 916 640 004	Spring Retaining Ring	£1.00
18	2 601 323 021	Brush Holder	£3.27
19	3 601 033 503	Insulator	£1.90
20	1 604 652 013	Spiral Spring	£1.00
22	3 605 500 580	Housing Cover	£7.01
23	2 910 211 214	Tapping Screw	£1.84
24	2 910 611 404	Tapping Screw	£1.00
26	2 910 211 019	Tapping Screw	£1.00
27	2 910 601 412	Tapping Screw	£2.33
29	2 603 490 017	Torx Oval-head Screw	£1.00
31	2 610 906 893	Nameplate	£2.51
32	2 610 907 030	Reference Plate	£2.51
34	2 603 312 001	Union Nut	£2.67	NOT AVAILABLE
35	2 916 650 003	Spring Retaining Ring	£1.00
104	2 610 904 501	Reference Plate	£1.90
700	3 605 702 619	Base Plate	£59.98
703	3 601 039 503	Cover Plate	£7.01
704	3 603 481 516	Screw	£3.36
705	2 911 001 166	Hex Screw	£0.00	Contact Us
707	3 603 345 508	Knurled Button	£0.00	Contact Us
710	3 605 702 625	Milling Fixture	£0.00	Contact Us
711	3 601 032 522	Plate	£0.00	Contact Us
712	3 600 132 505	Screw	£0.00	Contact Us
713	3 601 119 734	Manufacturer's Nameplate	£0.00	Contact Us
714	3 603 415 565	Screw	£0.00	Contact Us
715	3 607 000 615	Parts Set	£60.19
717	1 907 950 004	Offset Screwdriver	£4.19
720	3 607 000 506	Parallel-guide	£0.00	Contact Us
721	3 602 380 500	Support	£0.00	Contact Us
722	3 602 386 502	Guide Piece	£0.00	Contact Us
723	3 603 481 512	Knurled Button	£0.00	Contact Us
724	2 915 121 004	Square Nut	£1.00
725	2 910 091 120	Pan Head Screw	£1.00
730	3 607 000 555	Parallel-guide	£30.91
731	3 602 380 501	Support	£0.00	Contact Us
732	3 602 386 504	Guide Piece	£0.00	Contact Us
733	3 603 481 514	Knurled Thumbscrew	£0.00	Contact Us
734	2 915 011 006	Hex Nut	£1.00	NOT AVAILABLE
735	2 610 906 500	Deep-groove Ball Bearing	£15.05
736	3 602 305 502	Pad	£0.00	Contact Us
737	2 910 091 046	Pan Head Screw	£1.00
738	2 916 014 006	Plain Washer	£0.00	Contact Us
740	3 605 702 613	Base Plate	£113.45
741	3 605 702 547	Clamp Ring	£0.00	Contact Us
742	3 600 190 514	Base Plate	£0.00	Contact Us
746	1 603 339 006	Wing Nut	£2.05
747	3 600 100 523	Washer	£0.00	Contact Us
748	3 600 100 520	Spring Washer	£2.05
749	2 910 091 152	Pan Head Screw	£0.00	Contact Us
750	3 603 106 510	Bolt	£0.00	Contact Us
751	2 910 001 126	Socket Head Cap Screw	£1.00
752	3 606 100 504	Screw	£0.00	Contact Us
753	2 911 051 197	Hex Screw	£1.00
754	3 607 000 514	Base	£0.00	Contact Us
758	3 601 119 610	Manufacturer's Nameplate	£0.00	Contact Us
760	3 605 702 612	Base Plate	£158.68
761	3 605 702 544	Base	£0.00	Contact Us
762	1 900 905 131	Deep-groove Ball Bearing	£14.83
763	3 600 144 506	Flange	£0.00	Contact Us
764	3 606 120 529	Spindle	£0.00	Contact Us
766	3 600 119 508	Retaining Snap Ring	£0.00	Contact Us
767	3 603 402 500	Stop Screw	£0.00	Contact Us
768	3 605 510 542	Dust-protection Cover	£0.00	Contact Us
769	2 912 065 114	Set Screw	£0.00	Contact Us
770	2 910 021 122	Socket Head Cap Screw	£2.05
771	3 601 071 500	Base Plate	£0.00	Contact Us
772	3 604 736 506	Toothed Belt	£7.01
773	3 603 415 562	Screw	£0.00	Contact Us
774	3 606 625 545	Toothed Lock Washer	£23.69
775	1 907 950 002	Offset Screwdriver	£0.00	Contact Us
776	2 607 950 004	Offset Screwdriver	£1.00
778	3 601 119 609	Manufacturer's Nameplate	£0.00	Contact Us
800	1 607 014 116	Carbon-brush Set	£7.76
801	2 603 410 023	Socket Head Cap Screw	£1.00
802	2 608 570 066	Collet	£12.47
805	9 601 497 907	Single-head Eng. Wrench	£3.50	NOT AVAILABLE
810	3 601 119 595	Nameplate	£3.03

Accessories for Bosch 0 601 608 434

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £10.50

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £13.73

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £8.82

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:

Price: £11.00

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:

Price: £11.00

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £13.01

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:

Price: £16.57

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £12.69

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:

Price: £14.90

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:

Price: £14.06

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:

Price: £14.90

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:

Price: £14.90

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £23.19

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:

Price: £27.60

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £32.01

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:

Price: £16.15

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

Price: £17.09

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:

Price: £33.60

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:

Price: £13.73

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

Price: £26.44

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

Price: £27.71

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:

Price: £20.97

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £17.63

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £15.95

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:

Price: £16.57

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:

Price: £19.31

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

Price: £26.44

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:

Price: £38.02

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:

Price: £23.19

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:

Price: £43.05

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:

Price: £36.95

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £39.17

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £28.36

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £42.41

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:

Price: £22.56

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

Price: £17.30

Buy Replacement Parts and Accessories for the Bosch 0 601 608 434

39 Compatible Accessories Available!

Accessories for Bosch 0 601 608 434

Contact Info

Secure Shopping

Our Service

Help And Advice

Your Account

Recently Viewed