0 601 611 048 Spares and Parts for BOSCH ROUTER GOF 1600 (ROUTERS)

Ref:	Part Number:	Description	Price
1	3 605 108 589	Motor Housing	£46.62	NOT AVAILABLE
2	3 604 220 531	Field	£55.92
3/70	3 606 610 517	Fan	£9.64	NOT AVAILABLE
4	3 605 702 592	Fan Housing	£71.84
5	3 605 500 575	Housing Cover	£5.13
6	3 605 500 596	Sealing Cap	£2.45	NOT AVAILABLE
7	3 605 702 595	Base Plate	£105.14
8	3 600 190 515	Intermediate Plate	£5.91	NOT AVAILABLE
9	3 605 133 519	Handle	£9.91	NOT AVAILABLE
10	3 605 133 520	Handle	£9.64	NOT AVAILABLE
12	3 600 190 516	Toothed Lock Washer	£2.33
13	3 607 200 510	On-off Switch	£23.69	NOT AVAILABLE
14	1 607 328 034	Suppression Filter	£3.36
15	3 601 032 500	Fastening Clamp	£5.30
16	2 910 611 011	Tapping Screw	£1.00	NOT AVAILABLE
18	3 600 707 503	Grommet	£3.03
19	3 603 415 556	Pan Head Screw	£2.05
21	1 604 336 008	Brush Holder	£15.05
22	3 603 500 500	Threaded Spindle	£5.91	NOT AVAILABLE
23	2 910 611 018	Tapping Screw	£1.00	NOT AVAILABLE
24	2 910 611 019	Tapping Screw	£2.00	NOT AVAILABLE
25	2 910 141 197	Hex Socket Head Cap Screw	£1.00
26	1 614 652 001	Spiral Spring	£3.03
28	1 611 331 007	Tab Washer	£1.00
29	1 613 412 001	Tapping Screw	£1.00
30	1 900 905 276	Deep-groove Ball Bearing	£0.00	NOT AVAILABLE
31	3 600 119 507	Spring Retaining Ring	£1.90
32	3 600 900 526	Deep-groove Ball Bearing	£25.04
33	3 600 034 503	Fastening Plate	£4.45
34	3 603 415 559	Rec Ct-sunk Tapping Screw	£1.66
35	3 603 301 522	Hex Nut	£7.01	NOT AVAILABLE
37	3 601 961 500	Retaining Bracket	£4.45	NOT AVAILABLE
38	3 604 613 502	Compression Spring	£1.90	NOT AVAILABLE
39	2 910 611 034	Screw	£1.90
40	3 603 415 540	Socket Head Cap Screw	£2.33
41	3 600 232 503	Depth-gauge	£7.37
42	2 916 650 014	Spring Retaining Ring	£1.00
43	3 601 254 501	Leaf Spring	£4.19	NOT AVAILABLE
44	3 602 033 500	Locking Lever	£1.00
45	3 603 053 503	Axle	£17.99	NOT AVAILABLE
46	3 604 613 503	Compression Spring	£2.33
47	2 910 951 118	Oval-head Screw	£1.00
48	2 915 065 007	Hex Nut	£1.90	NOT AVAILABLE
49	2 603 345 015	Adjusting Nut	£1.90	NOT AVAILABLE
50	3 603 120 501	Guide Piece	£1.95	NOT AVAILABLE
51	3 602 000 509	Adjusting Lever	£5.02	NOT AVAILABLE
52	3 604 651 501	Clamping Spring	£1.90	NOT AVAILABLE
53	3 602 202 500	Adjusting Eccentric	£9.91	NOT AVAILABLE
54	2 916 011 010	Plain Washer	£1.00
55	2 915 061 002	Hex Nut	£1.00
56	3 603 415 560	Thread-forming Tap. Screw	£1.00
57	3 604 619 502	Compression Spring	£2.33
58	2 915 055 108	Hex Nut	£0.00	NOT AVAILABLE
59	3 916 060 500	Spring Washer	£1.00
61	3 601 119 653	Manufacturer's Nameplate	£2.51
62	3 603 313 507	Union Nut	£9.85
63	3 605 510 526	Protective Shield	£5.91	NOT AVAILABLE
65	2 910 601 433	Rec Ct-sunk Tapping Screw	£0.00	NOT AVAILABLE
67	3 601 007 502	Insulating Tube	£1.00
74	3 600 590 504	Air-deflector Ring	£3.17	NOT AVAILABLE
75	1 601 030 022	Tab Washer	£1.00
80	2 914 411 045	Thread-forming Tap. Screw	£1.00
650/60	3 603 001 518	Guide Rod	£5.89	NOT AVAILABLE
650/10	3 602 386 501	Guide Plate	£3.89	NOT AVAILABLE
650/50	2 915 011 006	Hex Nut	£1.00	NOT AVAILABLE
650/40	2 910 021 154	Socket Head Cap Screw	£1.00
650/30	2 916 011 011	Plain Washer	£1.00
650/20	2 610 996 063	Rim	£31.92
650/70	2 603 480 003	Wing Screw	£2.33
650/80	3 601 119 612	Manufacturer's Nameplate	£2.00
654	3 605 703 528	Tool Guide	£0.00	NOT AVAILABLE
655	3 603 523 501	Threaded Spindle	£0.00	NOT AVAILABLE
656	3 608 570 505	Collet Chuck	£0.00	NOT AVAILABLE
657	2 607 950 504	Single-head Eng. Wrench	£2.05
658	1 907 950 514	Single-head Eng. Wrench	£5.79	NOT AVAILABLE
700	3 605 703 527	Tool Guide	£0.00	NOT AVAILABLE
700	3 605 703 529	Tool Guide	£0.00	NOT AVAILABLE
701/5	3 608 570 500	Collet Chuck	£0.00	NOT AVAILABLE
701/5	3 600 499 503	Collet Chuck	£31.92	NOT AVAILABLE
701/5	3 608 570 502	Collet Chuck	£0.00	NOT AVAILABLE
701/5	3 600 499 502	Collet Chuck	£0.00	NOT AVAILABLE
701/5	3 608 570 504	Collet Chuck	£0.00	NOT AVAILABLE
800	1 607 014 103	Carbon-brush Set	£10.06
809	2 603 410 001	Socket Head Cap Screw	£1.00
810	3 601 119 779	Nameplate	£0.00	NOT AVAILABLE
816	3 603 029 500	Depth-gauge	£7.42	NOT AVAILABLE
824	3 608 939 626	Vacuum Adapter	£0.00	NOT AVAILABLE
825	3 608 939 611	Vacuum Adapter	£39.49
826	3 607 929 500	Brush-cover	£5.91	NOT AVAILABLE
827	2 910 761 164	Countersunk-head Screw	£1.90	NOT AVAILABLE
830	3 604 011 593	Armature	£0.00	NOT AVAILABLE
835	1 607 000 228	Power Supply Cord	£19.05
888	1 601 106 032	Nameplate	£2.57

Accessories for Bosch 0 601 611 048

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £10.50

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £13.73

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £8.82

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:

Price: £11.00

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:

Price: £11.00

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £13.01

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:

Price: £16.57

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £12.69

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:

Price: £14.90

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:

Price: £14.06

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:

Price: £14.90

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:

Price: £14.90

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £23.19

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:

Price: £27.60

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £32.01

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:

Price: £16.15

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

Price: £17.09

Biscuit jointer set - C152X1/2TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/2 inch Includes:

Price: £33.60

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:

Price: £33.60

Two flute cutter 12.7mm diameter - C153DX1/2TC

Two flute cutter 12.7mm diameter X 50.0mm with centre tip for plunge cutting in abrasive metals, softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=2 inches Cut length=50 mm Shank Diameter=1/2 inch Includes:

Price: £23.19

Two flute cutter 12.7mm diameter - C153X1/2TC

Two flute cutter 12.7mm diameter X 50.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=2 inches Cut length=50 mm Shank Diameter=1/2 inch Includes:

Price: £14.90

Two flute cutter 12.7mm diameter - C164X1/2TC

Two flute cutter 12.7mm diameter X 63.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=2 1/2 inches Cut length=63 mm Shank Diameter=1/2 inch Includes:

Price: £20.97

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:

Price: £13.73

Two flute cutter 12mm diameter - C172X1/2TC

Two flute cutter 12.0mm diameter X 63.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=2 1/2 inches Cut length=63 mm Shank Diameter=1/2 inch Includes:

Price: £20.97

Aquamac 21 Recesser 54.5mm diameter - C207X1/2TC

Aquamac 21 Recesser 46.3 mm diameter. Comes complete with a guide bearing to reduce setting up time and simplify machining operations.

D=46.3 mm D2=34.3 mm C=10.3mm C2=2.7 mm B=28.6 mm OL=90 mm Shank Diameter=1/2 inch Includes:

Price: £50.19

Intumescent cutter set 10mm x 40mm - C208X1/2TC

Neat cut intumescent cutter set, 40mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=40 mm C=10 mm B=32 mm E=4 mm Shank Diameter=1/2 inch Includes:

Price: £38.02

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

Price: £26.44

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

Price: £27.71

Two flute cutter 12.7mm diameter - TR17DX1/2TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 12.7mm diameter X 50.0mm cut.

D=1/2 inch D=12.7 mm C=50 mm OL=93 mm Shank Diameter=1/2 inch Includes:

Price: £25.92

Two flute cutter 12.7 diameter 12.7mm diameter - TR17X1/2TC

Two flute cutter for a clean finish. 12.7mm diameter X 50.0mm cut.

D=1/2 inch D=12.7 mm C=50 mm OL=94 mm Shank Diameter=1/2 inch Includes:

Price: £22.04

Two flute cutter 12.7mm diameter - TR18DX1/2TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 12.7mm diameter X 63.0mm cut.

D=1/2 inch D=12.7 mm C=63 mm Shank Diameter=1/2 inch Includes:

Price: £29.80

Two flute cutter 12.7mm diameter - TR18X1/2TC

Two flute cutter for a clean finish. 12.7mm diameter X 63.0mm cut.

D=1/2 inch D=12.7 mm C=63 mm OL=106 mm Shank Diameter=1/2 inch Includes:

Price: £25.39

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:

Price: £20.97

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £17.63

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £15.95

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:

Price: £16.57

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:

Price: £19.31

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

Price: £26.44

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:

Price: £38.02

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:

Price: £23.19

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:

Price: £43.05

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:

Price: £36.95

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £39.17

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £28.36

Bearing guided rebater 12.7mm - TR34X1/2TC

Bearing guided rebater, includes 3 extra bearings (9.5mm, 15.9mm and 19.1mm)

D=35mm C=12.7mm Shank Diameter=1/2 inch Includes:

Price: £37.48

Biscuit jointer set - TR35X1/2TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/2 inch Includes:

Price: £42.41

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £42.41

Two flute cutter 12mm diameter - TR37X1/2TC

Two flute cutter for a clean finish. 12.0mm diameter X 63.0mm cut.

D=12 mm C=54 mm OL=115 mm Shank Diameter=1/2 inch Includes:

Price: £29.77

Two flute cutter 15mm diameter - TR40DX1/2TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm OL=63 mm Shank Diameter=1/2 inch Includes:

Price: £22.56

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:

Price: £22.56

Intumescent cutter set 10mm x 40mm - TR41X1/2TC

Bearing guided intumescent recesser, 40.0mm diameter X 10.0mm cut.

D=40 mm Cut length=10 mm B=32 mm E=4 mm Shank Diameter=1/2 inch Includes:

Price: £38.63

Intumescent cutter set 15mm x 40mm - TR42X1/2TC

Bearing guided intumescent recesser, 40.0mm diameter X 15.0mm cut.

D=40 mm Cut length=15 mm B=32 mm E=4 mm Shank Diameter=1/2 inch Includes:

Price: £39.70

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

Price: £17.30

Router Cutter - TR47X1/2TC

Bearing guided roman ogee, by raising the cutter the top is quickly removed. 25.4mm diameter.

Price: £33.60

Buy Replacement Parts and Accessories for the Bosch 0 601 611 048

57 Compatible Accessories Available!

Accessories for Bosch 0 601 611 048

Contact Info

Secure Shopping

Our Service

Help And Advice

Your Account

Recently Viewed