Skip to main content

Bosch Angle Grinder PWS 600 Parts (0 603 371 042)

Drawings
Motor Housing
£3.99
Field
£0.00 Not Available
3/50 1606610121
Fan
£1.00
Switch
£7.82
4/40 2910110048
Pan Head Screw
£1.00
Power Supply Cord
£11.64
Grommet Ø6,5-Ø6,9X95 MM
£2.52
Grommet
£2.23
Fastening Clamp
£1.00
Manufacturer's Nameplate
£2.51
Suppression Filter
£4.47 Not Available
Deep-groove Ball Bearing
£3.90
Deep-groove Ball Bearing 8x22x7
£4.47
Compression Spring
£1.00
Adjusting Slide
£2.23
Switch Handle
£1.00
Housing Cover
£2.45
Rubber Bushing
£2.23
Rubber Ring
£2.01
Bearing Flange
£7.01
Air-deflector Ring
£2.23
Grinding Spindle M14, SW17
£5.55
Shim
£1.00
Shim
£2.23
Shim
£2.01
Spring Washer
£1.00
Crown Gear
£7.76
Spiral Spring
£1.00
Spring Retaining Ring
£2.01
Bevel Gear
£3.27
Hex Nut
£1.00
Tapping Screw
£1.00
Tapping Screw
£1.00
Connecting Cable
£1.00
Connecting Cable
£0.00 Not Available
Tapping Screw
£1.00
O-ring
£1.00
Ferrite Core
£3.90
650/50/20 1600210039
O-ring 20,35x1,78 MM
£2.01
652/20 2910141197
Hex Socket Head Cap Screw
£1.00
652/20 2910022197
Socket Head Cap Screw
£1.00
750/10 1602025024
Auxiliary Handle
£4.28
750/50 1605703099
Clamping-flange
£1.00
750/20 1603340040
Clamping Nut
£1.00
750/10 2602025067
Auxiliary Handle
£2.91
750/30 1607950043
Pin-type Face-wrench
£0.00
Protective Cover
£21.65
Fast Locking Flange
£37.23
Armature With Fan
£0.00 Not Available
Power Supply Cord
£15.49
Nameplate
£2.57
Carbon-brush Set
£7.82
Carbon-brush Set
£0.00 Not Available
Brush Holder
£3.27
821/010 1607000253
Push-button
£2.01
Gear Housing
£0.00 Not Available
Crown Gear
£0.00 Not Available
Needle Bearing
£3.90

Bosch PWS 600 Spare Parts

The Bosch PWS 600 is a compact mains-powered angle grinder designed for everyday cutting, grinding and polishing jobs around the home, workshop and garage. Its smaller format makes it easy to handle when working in confined areas, while the 600W motor provides useful power for general-purpose applications.

The Bosch PWS 600 parts diagram above shows the individual components that make up the grinder, including the motor, carbon brushes, armature, bearings, gearbox, spindle, switch, guard and disc mounting components. Whether you're repairing a fault or refurbishing an older grinder, the diagram provides a useful reference for identifying the required part.

PWS 600 Carbon Brushes and Motor Problems

If your PWS 600 has begun sparking excessively, losing power, running intermittently or failing to start, worn carbon brushes are one of the first things to investigate.

The brushes gradually wear as the grinder is used and eventually need replacing. If new brushes don't cure heavy sparking or poor performance, the armature and commutator should also be checked for signs of excessive wear or damage.

Bosch PWS 600 Motor Replacement

A more serious motor fault doesn't necessarily mean the complete grinder is beyond repair. Depending on the exact version and parts availability, a Bosch PWS 600 motor replacement can be considered if the original motor has suffered significant damage.

Before ordering a motor or major electrical component, check the Bosch type number on the grinder's rating plate. This helps ensure that the replacement is suitable for the particular version of your PWS 600.

PWS 600 Armature and Bearing Replacement

An increasingly loud, rough or noisy grinder can indicate worn bearings or an issue with the armature. Mechanical noise may become particularly noticeable when the grinder is running without a cutting or grinding load.

The motor and drive components can be inspected using the parts diagram to determine whether the problem is coming from the armature, bearings, field or gearbox.

Gearbox and Drive Components

The gearbox transfers the motor's power to the spindle, so it is exposed to considerable mechanical stress whenever the PWS 600 is used for demanding grinding or cutting.

If the grinder develops a grinding, whining or knocking sound from the gearbox, or the spindle isn't turning correctly, the internal gears and bearings should be checked. Worn drive components can affect both performance and smoothness.

PWS 600 Spindle and Disc Flanges

Problems with the spindle, inner flange or outer flange can result in disc wobble or difficulty securing an abrasive or cutting disc correctly.

If the disc isn't sitting squarely or there is noticeable movement around the spindle, inspect the mounting components for damage and wear. Replacing a worn flange or spindle component may be all that's required to restore proper operation.

Switch and Electrical Faults

A PWS 600 that won't switch on or keeps cutting out could have a problem with the switch, power cable or internal electrical connections.

These components are worth checking before assuming that the motor has failed. A faulty switch or damaged cable can produce very similar symptoms to a motor fault and may be a considerably simpler repair.

PWS 600 Guard

The disc guard is an essential safety component and should be replaced if it becomes cracked, broken or otherwise damaged.

The guard and its associated mounting hardware can be identified from the PWS 600 parts diagram, making it easier to find the correct replacement rather than attempting to use a damaged or unsuitable guard.

Side Handle and External Components

The side handle gives the operator additional control over the grinder, particularly when applying pressure during heavy grinding. If it has become cracked, damaged or lost, the relevant handle and fixing components can be identified from the parts breakdown.

The housing, covers, screws and other smaller fittings can also suffer from the knocks associated with workshop and garage use. Individual replacement parts can be useful when bringing an older PWS 600 back into good condition.

PWS 600 Gearbox Seals and Smaller Parts

If you notice grease escaping from the gearbox or unusual movement around the spindle, inspect the seals, bearings and retaining components.

Small parts such as springs, screws, washers, retaining rings and seals can be easy to overlook during a repair, but replacing damaged or missing components can be important when rebuilding the grinder.

Find the Correct PWS 600 Replacement Part

Use the Bosch PWS 600 parts diagram above to locate the component you're looking for, then match its position with the PWS 600 parts list to identify the correct Bosch part number.

Be sure to check the 10-digit Bosch type number on the rating plate before ordering. Different versions can have differences in their motor, gearbox and electrical components, so matching the exact machine is important.

From Bosch PWS 600 carbon brushes, armatures and motor replacement parts to bearings, gears, spindles, flanges, guards, switches, handles and smaller gearbox components, there are plenty of Bosch PWS 600 spare parts available for keeping this compact angle grinder in service.

If your PWS 600 is suffering from excessive sparking, loss of power, disc wobble, gearbox noise, a faulty switch or damaged external parts, the parts diagram is a useful starting point for pinpointing the component that needs replacing.