Skip to main content

Bosch Electric Scraper PSE 180 E Parts (0 603 316 742)

Field
£25.04
Power Supply Cord
£9.91 Not Available
Power Supply Cord
£4.78
Grommet
£2.23
Cable Clip
£1.00
Manufacturer's Nameplate
£1.84
Sintered-metal Bushing
£1.90
Speed Governor
£33.34
Shrinkable Tube
£1.00
Torx Oval-head Screw 4x16
£1.00
Push-button
£2.33
Torx Oval-head Screw
£1.00
Plug
£2.33
Needle Bearing
£2.91
Compression Spring
£2.33
Pressure Disk
£2.33
Protective Cap
£2.45
Compression Spring
£2.45
Contact Spring
£1.00
Switch Slide
£4.19
Ball
£1.00
Shim
£2.05
Supporting Disc
£1.00
Adjusting Disc
£2.33
Needle Bearing
£3.40
754/10 2601329059
Knife Guard
£1.00
754/10 2601329060
Knife Guard
£1.00
Housing Section
£12.83
Armature
£26.13
Marking Plate
£2.33
Marking Plate
£2.33
816/04 2604321923
Carbon-brush Set
£5.30
Sintered-metal Bushing
£4.19
Guide Bearing
£7.01
Crown Gear
£19.05

The Bosch PSE 180 E is a corded electric scraper designed for removing materials such as adhesives, paint and other stubborn residues from surfaces. Its variable-speed control allows the operating speed to be adjusted to suit the application, while the front blade assembly provides the scraping action.

If your Bosch PSE 180 E is not working, has lost power, is running erratically or has developed a problem with the scraper mechanism, switch, motor or speed control, individual PSE 180 E spare parts can be identified from the parts diagram and parts list.

Bosch PSE 180 E Parts Diagram and Parts List

The PSE 180 E parts diagram above breaks the scraper down into its motor, electrical components, speed-control system, bearings, housing and front mechanism. There are several PSE 180 E type numbers, including 0 603 316 703, 0 603 316 737, 0 603 316 742 and 0 603 316 781, so the complete type number should be checked before ordering parts.

Bosch uses the 10-digit type number as the unique identifier for its tools, making it particularly important when selecting parts for an older machine.

PSE 180 E Motor and Armature Parts

The motor is one of the main areas to investigate if the PSE 180 E is losing power or refusing to operate. The parts breakdown includes the field, armature, bushings and bearings that make up the drive system.

For the 230–240V version, the parts list identifies 2 604 220 705 field and 2 604 011 924 armature, along with 2 600 302 027 sintered-metal bushing and 2 600 917 006 needle bearing.

If the scraper is producing excessive sparking, running unevenly or making unusual motor noises, the armature, field and supporting bearings can be checked as part of the diagnosis.

Bosch PSE 180 E Speed Control Parts

The PSE 180 E incorporates variable-speed control, allowing the operating rate to be adjusted for different scraping applications. The parts catalogue identifies 2 607 230 125 speed governor as a separate component.

If the PSE 180 E speed control is not working, the tool only operates at one speed or the speed varies unexpectedly, the governor and associated electrical connections should be inspected.

The speed-control components are particularly relevant on an older PSE 180 E where the motor itself may still operate normally but the electronic regulation has developed a fault.

PSE 180 E Switch and Electrical Components

The electrical system includes the power supply cord, cable clip, grommet, contact spring and switch slide. The parts breakdown identifies 2 604 460 125 power supply cord, 1 600 703 030 grommet, 2 601 035 001 cable clip and 2 602 319 037 contact spring for the applicable version.

The 2602319009 red switch slide is also listed as a separate component.

If the PSE 180 E will not start, cuts out during use or only operates intermittently, the power cable, switch mechanism and internal electrical connections are worth checking alongside the motor.

PSE 180 E Scraper Mechanism and Bearings

The front mechanism converts the motor's movement into the action required to operate the scraper blade. The parts list contains a number of small mechanical components, including pressure discs, compression springs, supporting discs, shims, adjusting discs and needle-roller bearings.

The 2 600 910 001 needle-roller bearing and 2 600 917 006 needle bearing support the moving mechanism, while 2 604 612 005 compression spring and 2 600 101 085 pressure disc are among the associated components.

If the PSE 180 E is making unusual mechanical noises or the scraper action feels rough or inconsistent, these internal components are worth checking.

PSE 180 E Blade and Guard Parts

The front of the scraper contains the working blade and associated protective components. The parts information identifies a 2601329059 knife guard, along with the supporting springs, contact components and other front-end hardware.

If the PSE 180 E blade mechanism is damaged, the scraper is not holding its working component correctly or a protective part has broken, check the individual front components against the correct diagram.

The exact blade arrangement should be matched to the particular PSE 180 E version, as the machine was produced in different regional and electrical configurations.

PSE 180 E Housing and Small Replacement Parts

The outer housing protects the motor and electrical components while providing the mounting points for the controls. The parts catalogue identifies the 2605190923 green housing section, as well as the protective cap, push button, screws, plug and various small mechanical fittings.

These smaller Bosch PSE 180 E parts can be useful when repairing an older scraper that has been dismantled for servicing or suffered physical damage.

Components such as 2 600 712 005 protective cap, 2 600 522 013 push button, screws, balls, shims and springs are separately identified within the parts list.

Identifying the Correct Bosch PSE 180 E Parts

When searching for Bosch PSE 180 E parts online, check the complete 10-digit type number printed on the machine before ordering. Bosch produced multiple PSE 180 E variants, and parts such as the power cord and nameplate can differ between versions.

From the PSE 180 E field and armature to the speed governor, switch slide, power cord, bearings, scraper mechanism, housing and smaller springs and fittings, the parts diagram provides a useful reference for identifying the component required.

Matching the original Bosch part number and exact machine type gives you the best starting point when selecting the correct PSE 180 E spare parts for your electric scraper.