Skip to main content

Bosch Router GKF 600 Parts (3 601 F0A 170)

2 Compatible Accessories Available!

Enhance your Bosch 3 601 F0A 170 with our range of accessories

Drawings
Motor Housing
£11.37 Not Available
Fan
£2.01
Switch
£5.08
Power Supply Cord - EU 2 Pin Plug
£10.95
Power Supply Cord
£9.85
Grommet Ø7,3-Ø8,6x76 MM
£2.23
Cable Clip
£1.00
Manufacturer's Nameplate
£2.01
Suppression Filter
£7.01
Deep-groove Ball Bearing
£5.56
Deep-groove Ball Bearing
£5.08
Self-locking Nut
£2.23
Brush Holder
£1.00
Brush-cover
£1.00
Spring Washer
£1.00
Tapping Screw
£1.00
Tapping Screw
£1.00
Screw
£1.00
Tapping Screw
£1.00
Spring Retaining clip DIN 471-15X1-FST
£1.00
Collet
£7.75
Collet
£15.49
Torx Oval-head Screw
£2.01
Air-deflector Ring
£2.23
Terminal
£1.00
Contact Strap
£1.00
Bearing Flange
£19.05
Pressure Spindle
£1.00
Spring Plate
£1.00
Terminal Block
£1.00
Connecting Cable
£2.33
Connecting Cable
£2.33
Base Plate
£22.45
Bolt
£2.01
Base Plate
£3.35
Plate
£2.52
Button
£1.00
Compression Spring
£1.00
Cover Plate
£1.00
Screw
£1.00
Edge Guide
£16.29 Not Available
Stator
£31.34
Armature
£50.31
Armature
£51.36
Nameplate
£2.33
Nameplate
£2.33
Carbon-brush Set
£7.02
Housing Cover
£6.15
Bearing Flange
£25.04
Cover
£6.15
Clamping Lever
£3.90
Hex Nut
£1.00
Conical Spring Washer
£1.00
Washer
£1.00
Screw
£2.23
Compression Spring
£1.00
Base
£35.16
Base Plate
£4.47
Base
£5.08
Pin
£1.00
Pin
£1.00
Screw
£1.00
Ratchet Cap
£1.00
Round-head Bolt
£1.00
Wing Nut
£1.00
Edge Guide
£4.45
Screw
£1.00
Knurled Thumbscrew
£2.52
Plain Washer
£1.00
Single-head Eng. Wrench
£4.47
Base Plate
£15.49
Handle
£2.91
Cap-handle
£2.91
Screw
£2.01
Nut
£1.00
Knurled Thumbscrew
£6.15
Screw
£1.00
Screw
£1.00
Dust Chamber
£5.56
Chute
£6.15

The Bosch GKF 600 is a compact professional palm router designed for routing wood and plastic, making it a useful tool for trimming, profiling and other detailed routing work. Its compact format means it is often used for jobs where control and manoeuvrability are important, but regular use can eventually lead to wear in the motor, bearings, collet, base and adjustment components.

If your Bosch GKF 600 is not working, has started losing power, is producing excessive sparking or has developed play or vibration around the cutter, replacing the affected component may be enough to get the router back into service.

Our range of Bosch GKF 600 spare parts includes motor and electrical components, bearings, collet and spindle components, base parts, edge-guide components, housing sections and smaller fittings. The parts information above can help you identify the individual component required for your particular version of the router.

Bosch GKF 600 Parts Diagram and Parts List

The Bosch GKF 600 parts diagram is useful when identifying individual components within the router, particularly where several small parts form part of the same assembly. The machine contains separate motor, electrical, spindle, base and adjustment sections, with many components available individually.

There are several GKF 600 type numbers, including 3 601 F0A 100, 3 601 F0A 101, 3 601 F0A 102, 3 601 F0A 161, 3 601 F0A 171 and 3 601 F0A 172. Bosch's own parts service confirms that the complete ten-digit tool number should be checked when selecting a spare part.

This is particularly important for electrical components because the parts listings show differences between 230 V and 110 V versions.

GKF 600 Carbon Brushes and Motor Parts

If your Bosch GKF 600 is losing power, running intermittently or producing more sparking than normal, the motor and carbon-brush assembly are worth checking. Bosch parts listings include the GKF 600 carbon-brush set, armature and stator for applicable versions.

GKF 600 carbon brushes are wear components and can eventually need replacement after extended use. If the brushes have become worn or damaged, the router may become intermittent or fail to run correctly.

The GKF 600 armature is also available for relevant versions, along with the stator. If the router has developed excessive sparking, unusual motor noise or a significant reduction in performance, these motor components may require inspection.

Before replacing an armature or stator, however, it is worth checking the brushes, switch, cable and other electrical components to establish where the fault is actually coming from.

Bosch GKF 600 Not Working?

If your GKF 600 is not working, the symptoms can help narrow down the cause.

A router that is completely dead may have a problem with the switch, power cord, connecting terminal, carbon brushes or another electrical component. If it starts and stops intermittently, the brushes, switch and cable should be checked.

If the motor runs but the cutter is not behaving correctly, the problem may instead be within the spindle, collet, bearing or mechanical assembly.

For a router that has become noticeably louder, vibrates more than usual or develops movement around the cutter, the bearings and spindle-related components are worth investigating.

Diagnosing the fault before ordering Bosch GKF 600 replacement parts can help avoid replacing components unnecessarily.

Always disconnect the router from the mains before carrying out inspection or repair work.

GKF 600 Switch and Power Cord

The electrical system is another important area when troubleshooting a Bosch GKF 600 that won't start. The parts listings include a switch, power supply cord, cable grommet, cable clip, connecting terminal and suppression filter for applicable versions.

A faulty GKF 600 switch can prevent the router from starting or cause intermittent operation. Similarly, a damaged power cord or cable entry point can cause electrical problems and should be inspected carefully.

The cable grommet is a small component, but it protects the cable where it enters the housing. Bosch lists different power cords and grommets for different versions, making it especially important to match the replacement to the correct type number.

Bosch GKF 600 Bearings and Spindle Parts

The spindle and bearing assembly is critical to the smooth operation of the router. The parts information includes groove ball bearings and a bearing flange, together with other components used around the motor and spindle assembly.

If your GKF 600 is making unusual noises, has developed excessive vibration or there is noticeable play around the cutter, worn bearings could be one possible cause.

A bearing problem can also affect the way the cutter rotates, making it important to investigate unusual movement rather than continuing to use the router if the spindle no longer feels secure.

The correct bearing and flange depend on the particular GKF 600 version, so use the part number from the applicable parts list when ordering.

GKF 600 Collet and Router Cutter Parts

The collet is responsible for securing the router cutter to the spindle. The GKF 600 parts listings include the collet and associated spindle components for applicable versions.

If a cutter is not being held securely, check the collet, spindle and associated components for wear or damage. A router cutter should always be correctly fitted and securely held before the machine is operated.

For anyone searching for Bosch GKF 600 collet parts, matching the collet to the exact machine version is important. Different configurations and replacement components may appear across the various GKF 600 type numbers.

Bosch GKF 600 Base and Depth Adjustment Parts

The base assembly allows the router to be positioned accurately against the workpiece, while the clamping mechanism controls the position of the motor within the base.

Replacement GKF 600 base parts include the base, base plate, clamping lever, ratchet cap, thumbscrew, washers, nuts and other associated components.

If the router is difficult to adjust, does not clamp securely or the motor position is slipping during use, inspect the GKF 600 clamping mechanism and associated fittings.

The clamping lever and smaller adjustment components can be particularly important because damage to one small part can affect the operation of the complete base assembly.

GKF 600 Edge Guide and Routing Accessories

The Bosch GKF 600 edge guide helps guide the palm router when following the edge of a workpiece. Bosch parts listings include an edge guide along with thumbscrews and other fittings used to secure the guide to the router.

If the edge guide has been damaged, lost or become difficult to secure, individual replacement components may be available rather than requiring replacement of the complete router.

The GKF 600 is also designed to work with Bosch guide rails and the Bosch Click & Clean dust-extraction system, giving the router additional flexibility when carrying out different routing applications.

GKF 600 Housing and Small Replacement Parts

Not every Bosch GKF 600 repair involves a motor or major mechanical component. The parts catalogues contain numerous smaller items, including the housing, housing cover, fan, air-deflector ring, brush cover, plates, buttons, springs, screws and other fittings.

The GKF 600 housing protects the internal components and provides the main structure around the motor. If the router has suffered impact damage, a cracked or damaged housing should be inspected carefully before the machine is used again.

Small components such as buttons, springs, covers and retaining parts can also be replaced individually where listed, making it possible to carry out more targeted repairs.

Find Bosch GKF 600 Parts Online

When looking for Bosch GKF 600 parts online, check the complete ten-digit type number on the router before ordering. Bosch specifically advises matching this number to the tool when selecting spare parts, and the available parts catalogues demonstrate that there are several GKF 600 versions.

Whether you need GKF 600 carbon brushes, an armature, stator, switch, power cord, bearing, collet, base, clamping lever, edge guide, housing component or one of the smaller fittings, matching the part number to your machine is the best way to identify the correct replacement.

With the right Bosch GKF 600 replacement parts, individual worn or damaged components can be replaced to keep this compact router working without automatically having to replace the complete tool.

Accessories for Bosch 3 601 F0A 170

13mm Guide Bush / Template Guide (Quick Fastening Lock) - 2609200138

13mm guide bush/template guide suitable for use with Bosch DIY and professional routers: GKF 600; GMF 1400 CE; GMF 1600 CE; GOF 900; GOF 900 ACE; GOF 900 CE; GOF 1600 CE; GOF 2000 CE Professional; POF 800; POF 1100 AE; POF 1200 AE; POF 1300 ACE; POF 1400 ACE.
View full description →
Price:  £13.07

27mm Guide Bush / Template Guide (Quick Fastening Lock) - 2609200141

27mm guide bush/template guide suitable for use with Bosch DIY and professional routers: GKF 600; GMF 1400 CE; GMF 1600 CE; GOF 900; GOF 900 ACE; GOF 900 CE; GOF 1600 CE; GOF 2000 CE Professional; POF 800; POF 1100 AE; POF 1200 AE; POF 1300 ACE; POF 1400 ACE.
View full description →
Price:  £15.46

This model also has 2 accessories available.

Scroll down to view them.