Skip to main content

DeWalt DCD776 Parts (DCD776 Type 10)

CLAMSHELL PAIR
£16.48
ROLL PIN
£1.92
ACTUATOR FWD/REV
£1.92
SWITCH SA
£56.60 Not Available
MOTOR SA
£38.81
TRANSMISSION SA
£46.92
SELECTOR SA
£2.96
CHUCK
£37.39
SCREW
£1.92
SCREW
£1.92
11 N015397
PLUG
£1.92
20 N372780
RATING PLATE
£1.92
21 N309544
BRAND LABEL
£1.92
30 N225459
PLATE
£1.92
31 N215912
GEAR
£2.29
32 N215913
GEAR
£1.92
33 N362740
CARRIER
£3.48
34 N236379
PIN
£1.92
35 N218992
ANVIL
£1.92
36 N209232
LOCKING RING
£3.48
37 N223513
WASHER
£1.92
38 N376650
HOUSING SA
£5.35
39 N253280
PIN
£1.92
40 N256699
WASHER
£1.92
41 N210954
SPRING
£1.92
42 N260199
ADJUSTER TORQUE
£1.92
43 N237359
COLLAR
£4.48
44 N317559
SCREW
£1.92
45 N225458
PLATE
£1.92
46 N215917
GEAR
£1.92
47 N215916
GEAR
£1.92
48 N362719
CARRIER
£8.45
49 N256760
GEAR
£3.98
50 N215916
GEAR
£1.92
51 N362739
CARRIER
£7.80
52 N218316
HOUSING
£1.92
DETENT
£1.92
54 N237139
SPRING
£1.92
55 N236540
RATCHET
£3.98
56 N236579
RATCHET
£2.96
57 N276970
WASHER
£1.92
58 N237919
SPRING
£1.92
59 N366639
DETENT
£8.45
60 N376651
SPINDLE SA
£15.04
61 N036457
SCREW
£1.92
861 N364880
KITBOX
£20.27
866 N123282
BATTERY 18V - 1.5AH - 27WH
£77.38
866 N314783
BATTERY 18V - 2.0AH - 36WH
£142.11
866 N379111
BATTERY 18V - 1.3AH
£84.34
871 N385685
CHARGER 10.8V - 18V
£55.00

DeWalt DCD776 Spare Parts

The DeWalt DCD776 is an 18V XR compact hammer drill driver, combining two-speed gearing with variable speed, 15-position torque control and hammer action. It has a 13mm single-sleeve keyless chuck and is capable of drilling up to 30mm in wood and 13mm in metal and masonry. 

If your DCD776 has been a regular workshop or site tool, individual components can eventually wear or fail. The DeWalt DCD776 parts diagram above covers the main assemblies of the drill, including the motor, transmission, chuck, switch, selector and forward/reverse controls, making it easier to identify the part required for a repair.

DCD776 Chuck and Gearbox Problems

The 13mm keyless chuck is one of the more heavily used parts of the DCD776. If drill bits are slipping, the chuck is becoming difficult to tighten or the jaws are no longer gripping evenly, the chuck itself may need replacing. The DCD776 parts information lists the chuck and chuck retaining screw separately. 

Problems with the two-speed transmission can present as grinding noises, poor power transfer or difficulty selecting the correct gear. The complete transmission assembly is available as an individual replacement component, which can be useful when repairing a drill that has suffered internal gearbox wear. 

DCD776 Motor and Power Loss

A DCD776 that runs but has noticeably less power, stops under load or makes unusual noises may have developed a problem with its motor or transmission. The parts breakdown identifies the motor assembly separately, allowing it to be replaced without changing the entire drill.

It's also worth checking the battery and connections before dismantling the tool. The DCD776 is an 18V cordless machine, with its performance depending on a suitable XR battery and good electrical contact between the battery and tool.

Switch and Trigger Repairs

If the drill won't start, cuts out intermittently or the trigger no longer responds correctly, the switch assembly is an important component to investigate. The DCD776 uses a dedicated switch assembly, with the forward/reverse actuator and other controls shown separately in the parts information. 

The forward/reverse actuator can also become damaged or worn after repeated use. If the drill is difficult to change direction or the control feels loose, this smaller component may be responsible rather than the main switch.

Hammer Action and Mode Selection

The DCD776 isn't simply a standard drill driver; it also provides a hammer drilling mode for masonry work. If the hammer function isn't engaging properly or the mode selector has become difficult to operate, the selector mechanism and transmission should be inspected.

The parts breakdown includes a separate selector assembly, making it possible to replace the control without necessarily replacing the complete gearbox. 

DCD776 Housing and Smaller Components

Years of use can also take their toll on the exterior of the drill. The parts list includes the clamshell housing, roll pins, selector and other smaller fittings, so damaged casing components don't necessarily mean the whole drill needs to be discarded. 

This can be particularly useful when restoring an older DCD776 that remains mechanically sound but has suffered damage to the casing or controls.

Find the Right DCD776 Replacement Part

Use the DeWalt DCD776 parts diagram above to identify the area of the drill you're working on, then match the reference number against the DCD776 parts list. It's important to check the type number of your drill before ordering, as parts can vary between different DCD776 versions.

From DCD776 chucks, transmission assemblies and motor units to switches, forward/reverse actuators, selectors, housing components and smaller replacement parts, there are a range of DeWalt DCD776 spare parts available to help repair and maintain this popular 18V hammer drill.

A fault with an older DCD776 doesn't automatically mean replacing the complete tool. Identifying the failed assembly and sourcing the correct replacement part can often be a much more economical way of getting the drill back into working condition.