Skip to main content

DeWalt DW625E Parts (DW625E Type 4)

62 Compatible Accessories Available!

Enhance your DeWalt DW625E Type 4 with our range of accessories

SERVICE KIT 115V
£120.48 Not Available
SERVICE KIT 230V
£154.93 Not Available
FIELD 115V
£76.33 Not Available
FIELD
£76.33 Not Available
SWITCH
£19.65 Not Available
BRUSH 230V
£6.52
BRUSH 120V
£9.98
CORDSET (M/PLUG) 230V
£20.27
CORDSET (M/PLUG) 115V
£58.33
BRUSH HOLDER 220V
£3.98
END CAP
£12.69
FIELDCASE
£18.44 Not Available
BRUSH LEAD
£1.98 Not Available
BRUSH LEAD
£2.44
LEAD 95MM RED
£1.92
LEVER
£2.29
SCREW
£1.92
SLIDER
£6.52
CLAMP
£2.96
BEARING
£8.45
CIRCLIP
£1.92
SCREW
£1.92
CORD PROTECTOR
£1.92
PROTECTOR
£1.92
SCREW
£1.92
WASHER
£1.92
SCREW
£1.92
CABLE CLAMP
£1.92
LEAD 80MM RED
£2.29
SUPPORT LH
£1.92
SUPPORT RH
£1.92
SCREW
£1.92
SCREW
£1.92
NUT,HEX MEAN M.12 UNI 5588 ZIN
£1.92
SCREW
£1.92
BAFFLE FAN
£2.85 Not Available
33 N041821
FAN
£11.17 Not Available
SPACER
£1.92
LEVER
£4.48
WASHER
£0.00 Not Available
BUSH
£1.92
SPRING
£1.92
SCREW
£8.45
PIN
£9.66
Kit Handles
£15.04
HOUSING LOWER
£73.49
SCREW
£1.92
NUT
£3.98
NUT
£5.35
RACK
£9.98
SCALE
£1.92
PINION
£4.48
Kit Handles
£15.04
Kit Handles
£15.04
PLATE
£1.92
SCREW WING
£3.48
SPRING
£1.92
WASHER
£1.92
BUTTON
£7.80
BEARING
£11.39
CLAMP
£8.45
SCREW
£1.92
LOCK NUT
£8.45
COLLET 1/2" / 12.7mm
£12.69
COLLET
£19.30
COLLET NUT
£7.80
SPRING
£1.92
ROD
£1.92
LENS
£2.29
LENS
£2.29
SPRING
£1.92
SCREW
£5.35
SCREW
£0.00 Not Available
SCREW
£1.92
SCREW.TEMP
£1.92
NUT
£1.92
NUT
£1.92
SCREW
£1.92
WASHER
£1.92
WASHER SPRING
£1.92
SCREW
£1.92
TURRET
£0.00 Not Available
TURRET
£6.52
BALL
£1.92
77 This part is unavailable
Not Available
77 This part is unavailable
Not Available
BASEPLATE SA
£103.07
INDEX
£9.98
BASE
£12.69
BASE
£14.83
SPRING
£1.92
SPRING
£1.92
SCREW SPECIAL
£24.68
SPRING
£1.92
ROD
£11.39
ROD 10MM X 300MM
£7.80
SCREW WING
£2.29
GUIDE
£1.92
FENCE SA
£24.68
WASHER
£1.92
CAPACITOR
£4.48
WASHER SPRING
£4.48
HOLDER SA
£34.10
LOCK
£1.92
SCREW
£1.92
WHEEL
£5.35
SCREW
£1.92
POLE PIECE
£8.45
101 868111-00
SPANNER
£8.45
103 868142-01
PCB
£71.98 Not Available
103 868142-02
PCB 115V
£92.65 Not Available
104 932839-00
WASHER
£1.92
105 868129-03
LEAD 100MM RED
£1.92
106 868129-05
LEAD 100MM RED
£1.92
107 329839-00
HOUSING
£45.03
108 This part is unavailable
Not Available
109 This part is unavailable
Not Available
109 326599-01
CAP 27 MM
£3.48
110 944817-00
HOLDER
£3.98
111 869076-00
SCREW
£1.92
112 943228-00
NUT
£0.00
113 931297-00
SCREW
£1.92
114 868127-01
SPACER
£4.24
116 249098-00
GUIDE BUSH
£11.39
130 941541-00
CIRCLIP
£1.92
200 329538-00
COVER
£20.27

Keep your DeWalt DW625E plunge router working reliably with the correct DeWalt DW625E spare parts and replacement components. Designed as a heavy-duty router for professional woodworking, the DW625E features electronic variable speed from 8,000 to 20,000 rpm, a spring-loaded twin-column plunge mechanism and adjustable depth control. It is suitable for routing wood, wood products and plastics.

If your DW625E is not working, losing power, cutting out, making unusual noises or experiencing problems with the plunge or depth adjustment, individual components can often be replaced to restore the router.

DW625E Parts Diagram and Parts List

The DeWalt DW625E parts diagram and parts list above show the individual components used throughout the router. There are several versions of the DW625E, including Type 5, Type 6 and Type 7, with some differences between the parts used in each version. DeWalt recommends checking the Type number on the tool before selecting a parts diagram or replacement component.

The diagrams cover the motor, electrical components, plunge assembly, collet and spindle, base, depth adjustment, parallel fence and numerous smaller springs, pins, washers and fasteners.

Carbon Brushes, Armature and Motor Parts

The DW625E uses a brushed motor, making carbon brushes an important service component. The parts listings include brush sets, brush holders, brush leads, field assemblies and armatures, with parts varying according to the Type and voltage. For example, Type 7 uses N431792 armature, N431793 230V field and 869368-00 brush pair.

If your DW625E is losing power or running intermittently, the brushes and motor components are worth checking. Excessive sparking, reduced performance or failure to maintain consistent operation can indicate wear within the brushed motor system.

Switch, PCB and Electrical Parts

The DW625E's electronic speed control allows the router to operate between 8,000 and 20,000 rpm, making the electrical system particularly important to its operation. The parts breakdown includes the 868128-00 switch, PCB assemblies, power cables, leads, brush wiring and other electrical components.

If the DW625E will not start or cuts out during use, the switch, cable, connections and electronic components should be inspected. PCB parts also differ between versions and voltage configurations, so the Type and voltage should be matched carefully before ordering.

Collet, Spindle and Router Cutting Parts

The collet and spindle assembly securely holds the router cutter while transferring rotation from the motor. The DW625E supports 1/2-inch and 1/4-inch collets, with the manual specifying a precision collet system and explaining the correct procedure for fitting a replacement collet.

If the cutter is slipping, difficult to remove or not being held securely, inspect the collet, nut, spindle and associated components. The parts listings also include the collet nut spanner, allowing the appropriate fitting and removal of the collet assembly.

Plunge Mechanism and Depth Adjustment Parts

The twin-column plunge mechanism provides the controlled vertical movement needed when routing, while the depth stop and fine adjustment system allow the cutting depth to be set accurately. The DW625E incorporates a three-stage depth position and a fine adjuster for the depth stop.

The parts diagrams include columns, guides, springs, levers, clamps, depth-stop components, knobs and other mechanical fittings. If the DW625E plunge mechanism is stiff, fails to hold its position or the depth adjustment is not working correctly, these components are worth inspecting.

Base, Parallel Fence and Guide Parts

Accurate routing also depends on the router base and guide system remaining secure. The DW625E includes a parallel fence with its own fine adjustment, together with a router base and baseplate extension.

Replacement DW625E parts include fence and guide components, brackets, knobs, clamps, screws and base-related fittings. These can be useful when a fence becomes damaged, a guide no longer holds its position or smaller mechanical components have been lost during workshop use.

Housing, Bearings and Small Replacement Parts

The DW625E parts diagrams contain a large number of smaller components supporting the main assemblies, including bearings, circlips, washers, springs, screws, levers, pins, bushings and housing sections. Type 5 listings, for example, include 330003-11 bearing, N348019 end cap and 942934-03 fieldcase.

These DeWalt DW625E replacement parts can be particularly useful when restoring an older router where the main motor and mechanical assemblies remain serviceable but individual fittings have become worn or damaged.

Find DeWalt DW625E Parts Online

When searching for DeWalt DW625E parts online, check the exact Type number and voltage shown on your router before ordering. Parts can vary significantly between Types, particularly around the armature, field, switch, PCB and electrical assemblies.

From carbon brushes and motor components to the switch, PCB, collet, spindle, plunge mechanism, depth adjustment, parallel fence and housing parts, the listings above make it easier to identify the correct DW625E spare parts for your repair.

Accessories for DeWalt DW625E Type 4

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.
D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £10.50

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.
D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £13.73

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.
D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £8.82

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.
D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £11.00

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.
D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £11.00

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.
D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £13.01

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.
D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:
View full description →
Price:  £16.57

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.
D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £12.69

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.
D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £14.90

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.
D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £14.06

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.
D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £14.90

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.
D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:
View full description →
Price:  £14.90

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings
D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:
View full description →
Price:  £23.19

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.
D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:
View full description →
Price:  £27.60

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.
D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £32.01

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.
D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:
View full description →
Price:  £16.15

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.
D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £17.09

Biscuit jointer set - C152X1/2TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)
D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £33.60

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)
D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £33.60

Two flute cutter 12.7mm diameter - C153DX1/2TC

Two flute cutter 12.7mm diameter X 50.0mm with centre tip for plunge cutting in abrasive metals, softwood, harwood, MDF, plywood and chipboard.
D=1/2 inch D=12.7 mm Cut length=2 inches Cut length=50 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £23.19

Two flute cutter 12.7mm diameter - C153X1/2TC

Two flute cutter 12.7mm diameter X 50.0mm cut for softwood, harwood, MDF, plywood and chipboard.
D=1/2 inch D=12.7 mm Cut length=2 inches Cut length=50 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £14.90

Two flute cutter 12.7mm diameter - C164X1/2TC

Two flute cutter 12.7mm diameter X 63.0mm cut for softwood, harwood, MDF, plywood and chipboard.
D=1/2 inch D=12.7 mm Cut length=2 1/2 inches Cut length=63 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £20.97

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.
D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:
View full description →
Price:  £13.73

Two flute cutter 12mm diameter - C172X1/2TC

Two flute cutter 12.0mm diameter X 63.0mm cut for softwood, harwood, MDF, plywood and chipboard.
D=15/32 inch D=12 mm Cut length=2 1/2 inches Cut length=63 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £20.97

Aquamac 21 Recesser 54.5mm diameter - C207X1/2TC

Aquamac 21 Recesser 46.3 mm diameter. Comes complete with a guide bearing to reduce setting up time and simplify machining operations.
D=46.3 mm D2=34.3 mm C=10.3mm C2=2.7 mm B=28.6 mm OL=90 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £50.19

Intumescent cutter set 10mm x 40mm - C208X1/2TC

Neat cut intumescent cutter set, 40mm diameter X 10mm cut for grooves on door frames for intumescent strips.
D=40 mm C=10 mm B=32 mm E=4 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £38.02

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.
D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £26.44

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.
D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £27.71

Two flute cutter 12.7mm diameter - TR17DX1/2TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 12.7mm diameter X 50.0mm cut.
D=1/2 inch D=12.7 mm C=50 mm OL=93 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £25.92

Two flute cutter 12.7 diameter 12.7mm diameter - TR17X1/2TC

Two flute cutter for a clean finish. 12.7mm diameter X 50.0mm cut.
D=1/2 inch D=12.7 mm C=50 mm OL=94 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £22.04

Two flute cutter 12.7mm diameter - TR18DX1/2TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 12.7mm diameter X 63.0mm cut.
D=1/2 inch D=12.7 mm C=63 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £29.80

Two flute cutter 12.7mm diameter - TR18X1/2TC

Two flute cutter for a clean finish. 12.7mm diameter X 63.0mm cut.
D=1/2 inch D=12.7 mm C=63 mm OL=106 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £25.39

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.
D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £21.51

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.
D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £21.51

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.
Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £20.97

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.
D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:
View full description →
Price:  £17.63

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut
D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £15.95

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut
D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £16.57

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut
D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £19.31

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut
D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £21.51

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut
D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £26.44

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut
D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £38.02

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.
D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £23.19

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.
D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £43.05

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.
D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £36.95

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.
D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £39.17

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.
D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:
View full description →
Price:  £28.36

Bearing guided rebater 12.7mm - TR34X1/2TC

Bearing guided rebater, includes 3 extra bearings (9.5mm, 15.9mm and 19.1mm)
D=35mm C=12.7mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £37.48

Biscuit jointer set - TR35X1/2TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut
D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £42.41

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut
D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £42.41

Two flute cutter 12mm diameter - TR37X1/2TC

Two flute cutter for a clean finish. 12.0mm diameter X 63.0mm cut.
D=12 mm C=54 mm OL=115 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £29.77

Two flute cutter 15mm diameter - TR40DX1/2TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.
D=15 mm C=25 mm OL=63 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £22.56

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.
D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £22.56

Intumescent cutter set 10mm x 40mm - TR41X1/2TC

Bearing guided intumescent recesser, 40.0mm diameter X 10.0mm cut.
D=40 mm Cut length=10 mm B=32 mm E=4 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £38.63

Intumescent cutter set 15mm x 40mm - TR42X1/2TC

Bearing guided intumescent recesser, 40.0mm diameter X 15.0mm cut.
D=40 mm Cut length=15 mm B=32 mm E=4 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £39.70

Collet Nut - 942893-00

Collet Nut. Ensure that collet is pressed into the back of the nut until it clicks in. A failure to do this will cause the collet to be jammed into the hollow spindle of the motor.
View full description →
Price:  £5.35

Collet - DE6273

1/4 collet must be pushed in collet nut before fitting to machine to avoid cutter jamming
View full description →
Price:  £17.63

Bearing - 868768-04

Bearing size. Aprox 46mm o/s diameter. Aprox 26mm i/s diameter.
View full description →
Price:  £12.69

Micro Adjustable Fence With Dust Extraction - DE6913

Universal micro adjustable fence with dust extraction
View full description →
Price:  £40.79

Ventilator or fan - 868126-00

The fan is for the armature on routers
View full description →
Price:  £3.98

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.
View full description →
Price:  £17.30

Router Cutter - TR47X1/2TC

Bearing guided roman ogee, by raising the cutter the top is quickly removed. 25.4mm diameter.
View full description →
Price:  £33.60

This model also has 62 accessories available.

Scroll down to view them.