Skip to main content

DeWalt DW703 Parts (DW703 Type 3)

2 Compatible Accessories Available!

Enhance your DeWalt DW703 Type 3 with our range of accessories

SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£0.00
Not Available
£0.00
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
BLADE BOLT
£1.92
CLAMP OUTER
£4.48
WASHER INNER CLAMP
£11.39
ADAPTOR
£6.52
GASKET
£1.92
SEAL
£1.92
BEARING NEEDLE
£1.92
BUTTON
£1.92
SPRING
£1.92
LOCK
£1.92
WIPER
£1.92
ARM
£96.04
35 This part is unavailable
Not Available
INSERT
£1.92
CHUTE
£6.29
DEFLECTOR
£1.92
GUARD
£3.24
WRENCH
£1.92
CLIP
£2.29
SHAFT
£3.98
SPACER
£2.08
SPRING
£23.93
WASHER
£1.92
SCREW
£1.92
GUARD
£21.32 Not Available
GUARD PLATE
£14.51 Not Available
ROLLER
£2.29
CIRCLIP
£1.92
PIVOT
£12.69
BUMPER
£1.92
SPRING
£0.00
SLEEVE
£1.92
RETAINING PLATE
£9.98
WASHER
£0.00 Not Available
LINK
£16.28
BUSH
£4.48
BUSHING
£4.48
HANDLE SA
£25.96
SWITCH
£25.96
CORDSET
£44.00
CORDSET
£42.53 Not Available
63 3618-00
CORD CLAMP
£1.92
CORD PROTECTOR
£1.92
CAPACITOR SA
£22.79
TERMINAL BLOCK
£6.52
HANDLE
£0.00 Not Available
LEVER
£4.30 Not Available
BOLT
£2.29
SPRING
£1.92
TRUNNION
£63.10
LOCKING PIN
£5.35
SEAL
£1.92
SCREW
£2.29
NUT
£0.00
STUD
£1.92
WASHER
£1.92
HANDLE
£15.04
FENCE
£49.05 Not Available
FENCE
£29.01
KNOB LOWER
£2.96
ROTARY TABLE
£100.82
KNOB
£4.48
BUSHING
£3.40 Not Available
CLAMP
£1.98
Not Available
£0.00 Not Available
COVER
£1.92
POINTER
£3.35
POINTER
£1.92
PLATE
£8.45
100 391994-00
GUARD
£2.85
101 98025-25
SCREW
£0.00
102 153792-00
WASHER
£1.92
103 153781-00
WASHER
£1.92
104 330021-02
NUT
£1.92
105 394995-02
BASE
£129.93
106 153612-00
FOOT
£1.92
107 391633-01
DETENT
£19.11
108 391635-00
RING
£4.32
109 395021-00
LABEL
£3.98
110 391325-00
IDENTITY LABEL
£0.00 Not Available
113 330019-03
SCREW
£1.92
114 330016-13
WASHER
£0.00
116 399110-00
STABILISER LEG
£9.28
118 330019-04
SCREW
£1.92
119 388414-01
BUSH
£1.92
201 330019-13
SCREW
£1.92
204 623919-00
BRUSH & LEAD
£7.80
204 614367-00
BRUSH & LEAD
£7.80
205 614368-00
BRUSH CAP
£1.92
206 623918-00
FIELDCASE SA
£73.47
206 614365-01
FIELDCASE SA
£103.83
207 614366-00
BAFFLE FAN
£4.48
208 614373-00
END CAP
£3.98
209 614364-00
ARMATURE 115V
£114.34
209 623917-00
ARMATURE 230V
£117.80
213 391573-00
GEARCASE COVER
£8.45
214 392628-00
SPINDLE & GEAR
£58.33
215 330003-29
BEARING BALL
£16.48
216 330045-13
SCREW
£1.92
217 395301-00
LABEL
£2.08
218 394976-00
LABEL
£2.29
219 147734-06
DUSTBAG
£16.48
220 868768-07
BEARING
£8.45
221 330003-04
BEARING
£3.48
800 790206-00
GREASE
£51.66
800 93488-00
GREASE
£17.89
836 559606-99
SERVICE TOOL CHECK 45 DEGREE ACCURACY
£32.88

The DeWalt DW703 is an older professional mitre saw built around a robust motor, rotating table and adjustable cutting mechanism. Although the machine is no longer a current model, its straightforward mechanical construction means many individual components can still be identified through the available parts diagrams.

If your DeWalt DW703 is not working, has developed excessive movement, is cutting inaccurately or has a problem with the motor, switch, blade guard or mitre adjustment, replacing the faulty component can be a practical way to repair the saw. The parts list above covers a wide range of DW703 spare parts, including electrical, mechanical and structural components.

DeWalt DW703 Parts Diagram

The DW703 parts diagram breaks the saw down into its individual assemblies and is particularly useful when identifying smaller components. Rather than replacing a complete mechanism, the diagram allows you to locate individual bearings, springs, shafts, pins, bushes, screws and adjustment components.

The parts information includes the motor assembly, blade and spindle components, guard, rotating table, trunnion, handle, switch, electrical connections and numerous smaller fittings.

The DW703 has been produced in different Type versions, including Type 1 and Type 3, so the exact Type number on your saw should be checked before ordering DeWalt DW703 parts.

DW703 Motor, Brushes and Electrical Parts

The motor is one of the first areas to investigate if your DW703 will not start, has lost power or is producing excessive sparking. The Type 1 parts list includes a replaceable brush and lead assembly, together with the end cap, switch, cordset, capacitor and terminal block.

The Type 1 parts information identifies 381028-08 brush and lead, 391933-00 end cap, 391926-01 switch, 330060-79 cordset, 393521-05 capacitor assembly and 393520-00 terminal block.

If the saw starts intermittently, cuts out during use or will not start at all, the power cable, switch, brushes and other electrical connections should be checked before looking further into the mechanical assemblies.

DeWalt DW703 Spindle and Blade Parts

The blade and spindle assembly transfers the motor's power to the cutting blade and has to maintain accurate alignment during operation. The parts breakdown includes the arbor bushing, shaft, bearings, blade bolt, washers, guard and other blade-related components.

The Type 1 diagram identifies 141987-06 arbor bushing, 146751-00 shaft, 330004-06 needle bearing and 869245-00 blade bolt among the components used around the blade assembly.

If the DW703 blade has excessive movement, the saw is making unusual noises around the spindle or the blade does not appear to run correctly, the spindle, bearing, bushing and associated hardware are worth inspecting.

DW703 Guard and Safety Components

The blade guard is designed to move with the saw head while protecting the cutting area when the machine is not engaged with the workpiece. The DW703 parts information includes the guard together with its supporting components.

The Type 1 list includes 393731-00 guard, 148520-00 deflector, 148608-00 insert, springs, buttons, locks and other small components associated with the assembly.

If the DW703 blade guard is sticking, does not return correctly or has been damaged, inspect the complete mechanism rather than assuming that the guard itself is the only faulty component.

DW703 Mitre Table, Trunnion and Adjustment Parts

The rotating table and trunnion assembly are responsible for setting and maintaining the saw's cutting angle. Regular use can eventually lead to wear in the shafts, bushes, locking components and adjustment mechanism.

The parts list includes 391578-01 trunnion, 387130-00 locking pin, 152852-00 bolt, 392363-00 lever and 386196-00 spring, along with other table and adjustment components.

If your DeWalt DW703 mitre adjustment is loose, the table will not lock securely or the saw has developed excessive movement, these components should be checked against the correct parts diagram.

DW703 Bearings, Springs and Smaller Parts

The DW703 contains numerous smaller mechanical parts that can be replaced individually. These include bearings, bushes, springs, locking pins, washers, screws, inserts and seals.

For example, the Type 1 parts breakdown identifies 330004-06 needle bearing, 399042-00 bushing, 398736-00 spring, 146714-00 lock and 146710-00 wiper.

These smaller DW703 replacement parts can be particularly useful when restoring an older saw. A worn bush, missing spring or damaged locking pin can affect the operation of a much larger assembly without necessarily requiring that complete assembly to be replaced.

Check Your DW703 Type Before Ordering Parts

The DeWalt DW703 is listed in different Type versions, with Type 1 and Type 3 parts diagrams currently identifiable. Some components are shared between versions, while others differ or have become unavailable over the machine's production life.

DeWalt recommends using the model and Type number when locating the correct parts diagram, rather than relying on the model number alone. The Type number is normally found on the saw's identification label.

Whether you need a DW703 switch, carbon brush, cordset, spindle, bearing, blade bolt, guard, trunnion, locking pin, spring, handle or other DeWalt DW703 spare part, matching the component to the correct Type diagram is the safest way to identify the right part for your saw.

Accessories for DeWalt DW703 Type 3

Brush & Lead - 381028-02

Carbon brush And Lead (PAIR).
View full description →
Price:  £7.80

Roller - 146774-00

Rollers for saw blade guard.
View full description →
Price:  £2.29

This model also has 2 accessories available.

Scroll down to view them.