Skip to main content

DeWalt DW708 Parts (DW708 Type 3)

3 Compatible Accessories Available!

Enhance your DeWalt DW708 Type 3 with our range of accessories

SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
BLADE BOLT
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£0.00 Not Available
SCREW
£1.92
SCREW
£0.00 Not Available
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW.SPECIAL
£0.00 Not Available
SCREW
£2.94 Not Available
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.88
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.58 Not Available
NUT
£1.58 Not Available
WASHER
£1.92
WASHER
£1.61 Not Available
WASHER
£1.92
WASHER
£1.92
WASHER
£1.88
WASHER
£1.92
WASHER THRUST
£1.92
WASHER
£1.92
WASHER
£1.92
WASHER
£1.92
CIRCLIP
£1.92
PLATE
£1.92
RING
£1.92
RETAINER
£1.92
49 This part is unavailable
Not Available
RING
£1.92
SEAL
£1.92
RING
£1.67 Not Available
SPRING
£1.90 Not Available
SPRING
£3.01 Not Available
SPRING
£1.92
SPRING
£2.08
SPRING
£1.58 Not Available
NUT WING
£1.92
SPRING
£1.92
SPRING
£14.93 Not Available
BEARING
£3.48
BEARING
£7.80
BEARING NEEDLE
£1.92
BEARING
£0.00 Not Available
BEARING
£0.00 Not Available
DRIVE PULLEY
£11.39
PULLEY
£11.39
BELT
£20.27
GASKET
£1.90 Not Available
LOCKING PIN
£1.92
KEY
£2.29
75 This part is unavailable
Not Available
CLAMP OUTER
£6.52
ADAPTOR
£4.48
BLADE CLAMP
£3.98 Not Available
SLEEVE
£3.98
COVER
£8.77 Not Available
FIELDCASE
£12.69
END CAP
£5.35
IDENTITY LABEL
£0.00 Not Available
BOLT
£0.00 Not Available
ARMATURE SA
£0.00 Not Available
ARMATURE & FAN
£83.88 Not Available
FIELD
£50.13 Not Available
FIELD 115V
£48.03 Not Available
BRUSH PLATE
£16.48
RATING PLATE
£1.00 Not Available
BAFFLE
£2.29
93 This part is unavailable
Not Available
PLATE
£15.04
95 This part is unavailable
Not Available
CORDSET (M/PLUG)
£29.25
COVERPLATE
£3.17 Not Available
CORD CLAMP
£1.92
SWITCH
£29.25 Not Available
100 153756-00
PLUG
£1.67 Not Available
101 153755-01
CLAMSHELL PAIR
£20.27
102 This part is unavailable
Not Available
103 153721-00
FOAM
£1.67 Not Available
104 153562-00
BELT COVER
£8.77 Not Available
105 This part is unavailable
Not Available
106 149365-01
IDENTITY LABEL
£0.00 Not Available
107 This part is unavailable
Not Available
Guard Kit
£0.00 Not Available
109 606883-01
Guard
£0.00 Not Available
110 153719-01
LINK
£18.57 Not Available
111 145318-00
BUMPER
£0.00 Not Available
112 146774-00
ROLLER
£2.29
113 146740-00
SLEEVE
£1.92
114 385756-00
BUSH
£3.32 Not Available
115 146751-00
SHAFT
£3.98
116 153593-01
SPACER
£1.90 Not Available
118 387131-00
LOCKING PIN
£2.44 Not Available
119 397000-00
SCREW.SPECIAL
£1.67 Not Available
120 153603-01
PAWL
£2.29
121 429941-00
TRUNNION
£354.51 Not Available
123 153582-00
GUIDE
£1.58 Not Available
126 147107-03
KNOB
£0.00 Not Available
BUSHING
£9.28 Not Available
129 153667-00
BUSHING
£1.67 Not Available
131 153578-00
SCALE
£3.32 Not Available
132 153575-00
POINTER
£3.32 Not Available
133 392422-00
HANDLE
£0.00 Not Available
135 386757-01
PIN
£2.76 Not Available
136 153574-00
BUTTON RELEASE
£2.94 Not Available
137 This part is unavailable
Not Available
PIVOT SHAFT
£6.32 Not Available
139 153640-00
PIN
£1.61 Not Available
140 429921-01
REPAIR KIT
£31.99 Not Available
141 153624-00
POINTER
£3.58 Not Available
142 This part is unavailable
Not Available
143 153621-00
HANDLE
£8.53 Not Available
144 153722-01
TRIGGER
£3.32 Not Available
145 153622-00
LOCKING PIN
£11.30 Not Available
146 153626-00
LEVER
£6.49 Not Available
147 605155-00
BUSHING
£1.92
148 153768-00
SPRING SA
£12.29 Not Available
149 395672-00
PLATE SA
£11.39
152 153765-02
BASE
£147.17 Not Available
153 153612-00
FOOT
£1.92
154 This part is unavailable
Not Available
156 153627-00
FENCE SA
£111.66
FENCE LH
£53.56 Not Available
158 153767-06
FENCE RH
£36.25 Not Available
159 147107-02
KNOB LOWER
£2.96
163 608563-01
WRENCH SPECIAL
£7.58
164 381028-08
BRUSH & LEAD (Single Brush)
£7.80
166 394976-00
LABEL
£2.29
167 380179-00
Not Available
£0.00 Not Available
168 This part is unavailable
Not Available
169 386886-00
WARNING LABEL
£1.90 Not Available
LOCK SA
£53.56 Not Available
174 This part is unavailable
Not Available
175 153608-00
INSERT
£3.58 Not Available
176 This part is unavailable
Not Available
177 320078-00
TERMINAL BLOCK
£2.96
177 393520-00
TERMINAL BLOCK
£6.52
180 384495-00
LOCKING DEVICE
£0.00 Not Available
181 386196-00
SPRING
£1.92
182 152852-00
BOLT
£2.29
190 387553-00
LABEL
£0.00 Not Available
191 145312-00
PLUG
£1.92
192 330045-45
SCREW
£1.92
193 391358-01
HOLDER
£1.92
194 398367-00
SCREW
£1.67 Not Available
195 388414-01
BUSH
£1.92
200 147734-06
DUSTBAG
£16.48
201 606886-00
GUARD PLATE
£9.79 Not Available
202 607137-00
COVER
£1.67 Not Available
203 385915-01
SCREW
£1.92
204 606887-00
PLATE
£4.99 Not Available
205 613497-00
THRUST PLATE
£1.92
210 This part is unavailable
Not Available
800 790206-00
GREASE
£51.66
801 93488-00
GREASE
£17.89
836 559626-99
S.T.SQUARE
£241.19
860 340992-08
BIT
£1.58 Not Available

The DeWalt DW708 is a professional mitre saw designed for accurate cross-cutting, mitre cutting and bevel cutting. Although the DW708 is an older DeWalt model, replacement components are still listed for several versions of the machine, including Type 1, Type 2, Type 3 and Type 4. The parts breakdowns cover the motor, blade drive, base, guard mechanism, adjustment system and numerous smaller mechanical components.

If your DeWalt DW708 is not working, is making unusual noises, has developed movement in the saw head or needs a replacement mechanical component, repairing the individual part can be a practical alternative to replacing the complete saw. Our range of DW708 spare parts includes carbon brushes, armatures, fields, bearings, belts, pulleys, blade components, rollers, shafts, sleeves, springs, locking parts and other replacement components.

DeWalt DW708 Parts Diagram and Parts List

The DW708 parts diagram above provides a detailed view of the components used throughout the saw. This is particularly useful when repairing an older machine where a small spring, sleeve, roller, shaft or locking component may need to be identified before ordering.

The parts listings for the DW708 include the main motor assembly and base assembly, together with individual components such as the DW708 armature, field, carbon brushes, bearings, drive pulley, belt, blade clamp, guard components, rollers, shafts and adjustment hardware. Several of these components are available separately rather than only as complete assemblies.

It is important to identify the correct DW708 Type number before ordering. Type 1, Type 2, Type 3 and Type 4 parts lists are available, and some components differ between versions. The voltage should also be checked when ordering electrical and motor parts.

DW708 Carbon Brushes and Motor Parts

The motor is an important area to inspect if your DW708 is losing power, sparking excessively or failing to start. Carbon brushes are wear components and the parts listings include brush and lead assemblies and brush holders for different versions of the saw.

For example, DW708 carbon brushes are listed under part numbers including 145323-06 and 381028-08, depending on the machine version. The motor assemblies also include the armature and fan, field or fieldcase, brush plate and supporting components.

If the saw has become weaker or the motor is behaving intermittently, the brushes should be checked for wear. The condition of the armature and commutator is also worth inspecting, particularly where worn brushes have caused excessive sparking.

DW708 Armature, Field and Electrical Components

The DW708 armature works with the field, carbon brushes and bearings to provide the rotation needed to drive the blade. Different DW708 Types use different armature and field assemblies, so matching the replacement component to the machine is particularly important.

The parts information identifies armature and fan assemblies, field components, brush plates, brush holders, cable clamps and other electrical and motor components. Type 3 listings, for example, include separate fieldcase, armature and field components.

If your DW708 motor is not working, electrical faults should be investigated alongside the brushes and motor components. A problem with the switch, cable, brush connection or internal wiring can produce similar symptoms to a failed motor.

DW708 Belt and Drive Pulley Parts

The DW708 uses a belt-driven blade assembly, with the motor connected to the cutting mechanism through a drive pulley and pulley system. Replacement DW708 belt 153555-00 and drive pulley 153554-00 are identified in the parts listings, along with pulley 153796-00 and related drive components.

A worn belt or damaged pulley can affect the transfer of power from the motor to the blade. If the motor runs but the blade does not operate correctly, the belt, pulleys, key and associated drive components are worth checking.

The DW708 parts lists also identify a pulley repair kit on some versions, providing another option where the problem is confined to the drive assembly rather than the complete motor.

DW708 Bearings, Shafts and Bushes

Several bearings support the rotating and moving parts of the DeWalt DW708. The parts listings include standard bearings, needle bearings and other supporting components, including bearing numbers 605040-20, 605040-32 and 330004-02 on relevant versions.

The saw also uses shafts, sleeves, bushes and rollers throughout the moving assemblies. Shaft 146751-00, sleeve 146740-00 and roller 146774-00 are examples of components listed for the DW708.

Worn bearings can contribute to unusual noise, vibration or rough movement, while worn bushes and sleeves can allow additional play within the mechanism. Replacing these individual components can help restore the movement of an older saw.

DeWalt DW708 Blade and Guard Parts

The blade assembly contains several individual components that can be replaced when damaged or worn. DW708 blade parts include blade clamps, sleeves, keys, covers and associated retaining hardware.

The blade guard mechanism also contains smaller service components. Roller 146774-00 is listed specifically for the DW708 and related DeWalt mitre saws, while the parts diagrams identify guard kits and supporting components for different versions.

If the DW708 blade guard is not moving correctly, inspect the roller, sleeves, springs, links and associated hardware as well as the guard itself. A problem with one of these smaller components can affect the movement of the guard assembly.

DW708 Mitre Adjustment and Base Parts

The base of the saw contains the mechanisms used to set and lock the required mitre angle. Over time, repeated use can cause wear to individual pins, springs, shafts, guides, knobs and other adjustment components.

The DW708 base assembly includes parts such as locking pins, shafts, spacers, guides, pawls and knobs. Part numbers including 153561-00 locking pin, 153638-00 key, 146751-00 shaft and 153603-01 pawl appear in the DW708 parts listings.

If the saw does not lock securely at its required mitre setting or the adjustment mechanism feels loose, checking these individual components can help identify the cause without automatically replacing the entire base assembly.

DW708 Pivot, Roller and Sliding Mechanism Parts

The saw head and guard mechanism rely on a collection of pivoting and moving components to operate correctly. The DW708 roller, sleeve and shaft are particularly useful parts to identify when working on these assemblies.

Roller 146774-00 and sleeve 146740-00 are listed across multiple DW708 Type versions, while shaft 146751-00 is also used within the mechanism.

If the saw head feels unusually stiff, loose or rough during movement, inspect the rollers, sleeves, bushes, shafts and locking components for signs of wear. Small amounts of wear in several components can add up and affect the feel and accuracy of the saw.

DW708 Housing, Handle and Small Parts

The DW708 replacement parts listings contain far more than just motor and blade components. The saw uses numerous small parts throughout the housing, electrical assembly and adjustment mechanisms, including screws, plugs, cable clamps, end caps, covers, spacers and retaining components.

The clamshell pair 153755-01, cable clamp 153669-00, end cap 391933-00 and various screws and covers are examples of the smaller components listed for different DW708 versions.

These parts can be particularly useful when restoring an older DW708 that has been dismantled for servicing or has suffered damage during transportation or regular workshop use.

Find DeWalt DW708 Parts Online

When searching for DeWalt DW708 parts online, start by checking the Type number and voltage of the saw. Parts diagrams are available for multiple versions, including DW708 Type 1, Type 2, Type 3 and Type 4, and there are differences between some of the components used in each version.

Our range of DW708 replacement parts covers carbon brushes, brush holders, armatures, fields, bearings, belts, pulleys, blade components, rollers, shafts, sleeves, springs, locking parts and other mechanical components.

Whether you are looking for DW708 carbon brushes, a replacement belt or pulley, motor components, bearings or one of the smaller parts used in the mitre adjustment and guard mechanisms, checking the parts list against your exact DW708 Type is the best way to identify the correct replacement.

Accessories for DeWalt DW708 Type 3

Brush & Lead - 381028-02

Carbon brush And Lead (PAIR).
View full description →
Price:  £7.80

Ring - 142273-00

Ring clips on to hold rollers on the blade guard.
View full description →
Price:  £1.92

Roller - 146774-00

Rollers for saw blade guard.
View full description →
Price:  £2.29

This model also has 3 accessories available.

Scroll down to view them.