Skip to main content

Elu MOF96 Parts (MOF96 Type 3)

61 Compatible Accessories Available!

Enhance your Elu MOF96 Type 3 with our range of accessories

ARMATURE
£93.26 Not Available
SWITCH
£30.26
BRUSH & HOLDER 230V
£11.39
CORDSET
£9.79 Not Available
COVER BRUSH
£5.83
FIELDCASE
£24.86 Not Available
SUPPRESSOR
£20.25
CORD PROTECTOR
£2.29
10 N110358
BEARING
£3.48
CLAMP
£1.92
SCALE
£1.98 Not Available
CORD CLAMP
£1.92
GUIDE
£1.92
COVER
£3.98
BAFFLE FAN
£3.58 Not Available
FAN
£4.48
PLATE
£8.45
BEARING
£8.45
DEPTH STOP
£11.39 Not Available
BUSH
£0.00 Not Available
HANDLE SA
£7.80
KNOB SA
£11.39
HOUSING LOWER
£60.53
NUT
£11.39 Not Available
COLLET & NUT SA
£24.68
COLLET & NUT SA
£20.27
BALL
£1.92
BASEPLATE SA
£68.87 Not Available
CIRCLIP
£1.92
SPRING
£1.92
ROD
£1.92
BASE
£11.39
TURRET
£0.00 Not Available
WASHER
£0.00 Not Available
WASHER
£1.92
SCREW
£0.00 Not Available
NUT
£1.92
SCREW.TEMP
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£1.92
SCREW
£0.00 Not Available
SCREW
£1.92
56 This part is unavailable
Not Available
LEAD BLUE
£1.67
LEAD BLUE
£1.58 Not Available
SPANNER
£4.48
SCREW
£1.92
SPANNER
£5.35
69 N406641
SPRING COMPRESSION
£1.92
LOCK BUTTON
£9.98
COVER
£7.58
75 This part is unavailable
Not Available
76 This part is unavailable
Not Available
77 This part is unavailable
Not Available
78 This part is unavailable
Not Available
INDEX
£1.92
SPRING
£1.92
SPRING
£1.92
SCREW SPECIAL
£24.68
ROD
£4.48
SCREW WING
£2.29
GUIDE
£1.92
FENCE SA
£24.68
WASHER
£2.17
91 This part is unavailable
Not Available
91 This part is unavailable
Not Available
SCREW
£0.00 Not Available
107 249221-00
WASHER
£1.92

Keep your Elu MOF96 plunge router in good working order with the correct Elu MOF96 spare parts and replacement components. The MOF96 is a 750W plunge router with a fixed 24,000 rpm no-load speed, 35mm plunge depth and 1/4-inch collet. It was designed for routing, grooving, rebating and other woodworking applications, with a two-column plunge mechanism and three-step graduated depth stop.

If your Elu MOF96 is not working, losing power, cutting out or producing inconsistent results, individual components such as the carbon brushes, switch, armature, bearings, collet or mechanical adjustment parts may need inspection or replacement.

MOF96 Parts Diagram and Parts List

The Elu MOF96 parts diagram and parts list above show the individual components used throughout the router. There are several MOF96 versions, including Type 1, Type 2 and Type 3, and parts can differ between versions and voltage configurations. Checking the Type number and voltage of your router before ordering is therefore important.

The parts breakdown covers the electrical system, motor, plunge mechanism, collet assembly, bearings, housing and the smaller components used to hold everything together.

Carbon Brushes, Armature and Motor Parts

The MOF96 uses a conventional brushed motor, making the carbon brushes an important service component. Worn brushes can affect motor performance and may contribute to intermittent running or loss of power.

Replacement brush and holder assemblies are listed for both 230V and 115V versions, including 247533-11 for 230V applications and 248447-11 for 115V versions. The parts diagrams also include different armatures depending on the MOF96 Type, such as 868389-00 on Type 1 and 868627-01 on later versions.

If your MOF96 is losing power, the brushes, armature and field components are worth checking before investigating more extensive mechanical faults.

Switch, Cable and Electrical Parts

The 760952-00 switch is used across the MOF96 parts listings, while the router also contains a mains cable, cord protection, cable clamp and electrical suppression components.

If the router has stopped starting or the MOF96 cuts out during use, the switch, cable and connections should be checked for damage. Always match electrical replacement parts to the correct voltage and Type of machine.

Collet, Nut and Router Cutting Parts

The MOF96 uses a 1/4-inch collet, and the parts listings include complete collet and nut assemblies. Type 1 parts include 326286-00 for an 8mm assembly and 326286-01 for a 6.35mm (1/4-inch) router collet and nut assembly.

A damaged or incorrectly fitted collet can prevent the router cutter from being held securely. If the cutter is slipping, vibrating excessively or not tightening correctly, inspect the collet, nut and associated components.

Bearings, Fan and Internal Components

The MOF96 contains several internal mechanical components that support the motor and keep the rotating assembly running correctly. The Type 3 parts listing, for example, includes N110358 bearing, 943054-00 fan and other internal components around the motor and fieldcase.

Noisy operation, excessive vibration or unusual running sounds can indicate that bearings or other internal components require inspection. Replacing an individual bearing or fan can be a more practical repair than replacing the complete router.

Plunge Mechanism and Adjustment Parts

The two-column plunge arrangement gives the MOF96 its controlled vertical movement, while the three-step graduated revolver depth stop allows repeatable depth settings.

The parts system includes pins, knobs, guides, scales, springs and other components associated with the router's adjustment and plunge mechanism. If the MOF96 plunge mechanism is stiff or not holding its setting, inspect these mechanical components as well as the columns and associated hardware.

Housing, Handles and Small Replacement Parts

Regular workshop use can result in damage to the router's housing, handles, brush covers, cord protector and smaller fittings. The parts listings include components such as the 869284-05 handle assembly, 868524-00 pin, 869284-23 knob assembly and 248954-00 lower housing.

These smaller Elu MOF96 replacement parts can be useful when restoring an older router that is mechanically sound but has suffered wear or damage to its external components.

Find Elu MOF96 Parts Online

When searching for Elu MOF96 parts online, check the Type number and voltage shown on your router before selecting a replacement. Type 1, Type 2 and Type 3 diagrams contain differences in components such as the armature, field and cordset, while some parts are shared between versions.

From carbon brushes and motor components to the switch, bearings, collet and nut, plunge mechanism, housing and smaller fittings, the parts listings above make it easier to identify the correct Elu MOF96 spare parts for your repair.

Accessories for Elu MOF96 Type 3

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.
D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £10.50

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.
D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £13.73

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.
D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £8.82

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.
D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £11.00

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.
D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £11.00

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.
D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £13.01

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.
D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:
View full description →
Price:  £16.57

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.
D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £12.69

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.
D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £14.90

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.
D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £14.06

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.
D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £14.90

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.
D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:
View full description →
Price:  £14.90

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings
D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:
View full description →
Price:  £23.19

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.
D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:
View full description →
Price:  £27.60

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.
D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £32.01

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.
D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:
View full description →
Price:  £16.15

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.
D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £17.09

Biscuit jointer set - C152X1/2TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)
D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £33.60

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)
D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £33.60

Two flute cutter 12.7mm diameter - C153DX1/2TC

Two flute cutter 12.7mm diameter X 50.0mm with centre tip for plunge cutting in abrasive metals, softwood, harwood, MDF, plywood and chipboard.
D=1/2 inch D=12.7 mm Cut length=2 inches Cut length=50 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £23.19

Two flute cutter 12.7mm diameter - C153X1/2TC

Two flute cutter 12.7mm diameter X 50.0mm cut for softwood, harwood, MDF, plywood and chipboard.
D=1/2 inch D=12.7 mm Cut length=2 inches Cut length=50 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £14.90

Two flute cutter 12.7mm diameter - C164X1/2TC

Two flute cutter 12.7mm diameter X 63.0mm cut for softwood, harwood, MDF, plywood and chipboard.
D=1/2 inch D=12.7 mm Cut length=2 1/2 inches Cut length=63 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £20.97

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.
D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:
View full description →
Price:  £13.73

Two flute cutter 12mm diameter - C172X1/2TC

Two flute cutter 12.0mm diameter X 63.0mm cut for softwood, harwood, MDF, plywood and chipboard.
D=15/32 inch D=12 mm Cut length=2 1/2 inches Cut length=63 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £20.97

Aquamac 21 Recesser 54.5mm diameter - C207X1/2TC

Aquamac 21 Recesser 46.3 mm diameter. Comes complete with a guide bearing to reduce setting up time and simplify machining operations.
D=46.3 mm D2=34.3 mm C=10.3mm C2=2.7 mm B=28.6 mm OL=90 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £50.19

Intumescent cutter set 10mm x 40mm - C208X1/2TC

Neat cut intumescent cutter set, 40mm diameter X 10mm cut for grooves on door frames for intumescent strips.
D=40 mm C=10 mm B=32 mm E=4 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £38.02

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.
D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £26.44

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.
D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £27.71

Collet 1/4MOF 98-131-177 DW625Ek - DE6273

Replacement collet. Fits the following machines:- Elu MOF112, 31, 77, 98, 131, 177(E) DeWalt DW625EK CMT 1E
D=1/2 inch d=1/4 inch Elu MOF112, 31, 77, 98, 131, 177(E) DeWalt DW624, DW625EK, 629 CMT 1E Includes:
View full description →
Price:  £17.63

Collet 8mm MOF 98-131-177 DW625Ek - DE6274

Replacement collet. Fits the following machines:- Elu MOF112, 31, 77, 98, 131, 177(E) DeWalt DW625EK
D=1/2 inch d=8 mm Elu MOF112, 31, 77, 98, 131, 177(E) DeWalt DW624, DW625EK, 629 CMT 1E Includes:
View full description →
Price:  £21.00

Collet 3/8MOF 98-131-177 DW625Ek - DE6275

Replacement collet. Fits the following machines:- Elu MOF112, 31, 77, 98, 131, 177(E) DeWalt DW625EK
D=1/2 inch d=3/8 inch Elu MOF112, 31, 77, 98, 131, 177(E) DeWalt DW624, DW625EK, 629 CMT 1E Includes:
View full description →
Price:  £21.00

Collet 1/2MOF 98-131-177 DW625Ek - DE6278

Replacement collet. Fits the following machines:- Elu MOF112, 31, 77, 98, 131, 177(E) DeWalt DW624, DW625EK, 629 CMT 1E
D=1/2 inch d=1/2 inch Elu MOF112, 31, 77, 98, 131, 177(E) DeWalt DW624, DW625EK, 629 Includes:
View full description →
Price:  £23.29

Two flute cutter 12.7mm diameter - TR17DX1/2TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 12.7mm diameter X 50.0mm cut.
D=1/2 inch D=12.7 mm C=50 mm OL=93 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £25.92

Two flute cutter 12.7 diameter 12.7mm diameter - TR17X1/2TC

Two flute cutter for a clean finish. 12.7mm diameter X 50.0mm cut.
D=1/2 inch D=12.7 mm C=50 mm OL=94 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £22.04

Two flute cutter 12.7mm diameter - TR18DX1/2TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 12.7mm diameter X 63.0mm cut.
D=1/2 inch D=12.7 mm C=63 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £29.80

Two flute cutter 12.7mm diameter - TR18X1/2TC

Two flute cutter for a clean finish. 12.7mm diameter X 63.0mm cut.
D=1/2 inch D=12.7 mm C=63 mm OL=106 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £25.39

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.
D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £21.51

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.
D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £21.51

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.
Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £20.97

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.
D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:
View full description →
Price:  £17.63

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut
D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £15.95

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut
D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £16.57

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut
D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £19.31

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut
D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £21.51

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut
D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £26.44

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut
D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £38.02

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.
D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £23.19

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.
D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £43.05

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.
D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £36.95

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.
D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £39.17

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.
D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:
View full description →
Price:  £28.36

Bearing guided rebater 12.7mm - TR34X1/2TC

Bearing guided rebater, includes 3 extra bearings (9.5mm, 15.9mm and 19.1mm)
D=35mm C=12.7mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £37.48

Biscuit jointer set - TR35X1/2TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut
D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £42.41

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut
D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £42.41

Two flute cutter 12mm diameter - TR37X1/2TC

Two flute cutter for a clean finish. 12.0mm diameter X 63.0mm cut.
D=12 mm C=54 mm OL=115 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £29.77

Two flute cutter 15mm diameter - TR40DX1/2TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.
D=15 mm C=25 mm OL=63 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £22.56

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.
D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £22.56

Intumescent cutter set 10mm x 40mm - TR41X1/2TC

Bearing guided intumescent recesser, 40.0mm diameter X 10.0mm cut.
D=40 mm Cut length=10 mm B=32 mm E=4 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £38.63

Intumescent cutter set 15mm x 40mm - TR42X1/2TC

Bearing guided intumescent recesser, 40.0mm diameter X 15.0mm cut.
D=40 mm Cut length=15 mm B=32 mm E=4 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £39.70

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.
View full description →
Price:  £17.30

Router Cutter - TR47X1/2TC

Bearing guided roman ogee, by raising the cutter the top is quickly removed. 25.4mm diameter.
View full description →
Price:  £33.60

This model also has 61 accessories available.

Scroll down to view them.