Hitachi PH-65A Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 1C | 332180 | Housing Ass'y | £0.00 |
|
| 1C | 332180 | Housing Ass'y | £0.00 |
|
| 1C | 332212 | Housing Ass'y | £0.00 |
|
| 1C | 332212 | Housing Ass'y | £0.00 |
|
| 1A | 957-133 | Housing Ass'y | £192.54 |
|
| 1B | 313-764 | Housing Ass'y | £0.00 |
|
| 2 | 956-984 | Brush Holder | £10.93 |
|
| 3 | 938-477 | Hex. Socket Set Screw M5x8 | £1.00 |
|
| 4 | 340-124C | Stator Ass'y 110v-115v | £0.00 |
|
| 4 | 340-124D | Stator Ass'y 120v-127v | £0.00 |
|
| 4 | 340-124E | Stator Ass'y 220v-230v | £25.75 |
|
| 4 | 340-124F | Stator Ass'y 240v | £0.00 |
|
| 4 | 340-124G | Stator Ass'y 240v | £0.00 |
|
| 4 | 340-124J | Stator Ass'y 240v | £0.00 |
|
| 4A | 340-124H | Stator Ass'y 115v | £0.00 |
|
| 4A | 340-124K | Stator Ass'y 230v | £0.00 |
|
| 4A | 340-124L | Stator Ass'y 220v-230v | £0.00 |
|
| 4A | 340-124M | Stator Ass'y 110v | £0.00 |
|
| 5 | 945-932 | Brush Terminal | £1.00 |
|
| 6 | 956-943 | Rubber Washer | £1.00 |
|
| 7B | 998-411 | Seal Lock Screw (w/ |
£0.00 |
|
| 8A | 956-764 | Special Washer | £1.00 |
|
| 9 | 956-944 | Fan Guide | £0.00 |
|
| 10 | 956-946U | Armature Ass'y 110v-115v | £0.00 |
Not Available
|
| 10 | 956-946D | Armature 120v-127v | £0.00 |
|
| 10 | 956-945 | Armature Ass'y 110v | £0.00 |
|
| 10 | 957-131 | Armature Ass'y 100v | £0.00 |
|
| 10A | 956-946E | Armature 220v-230v | £69.68 |
|
| 10A | 956-946F | Armature 240v | £0.00 |
|
| 10B | 956-946G | Armature 220v-230v | £0.00 |
|
| 11 | 956-683 | Stop Plate | £1.00 |
|
| 12 | 944-904 | Urethane Washer (a) M32 | £0.00 |
|
| 14 | 944-954 | Bearing Washer | £1.00 |
|
| 15 | 944-907 | Distance Ring (a) | £2.73 |
|
| 16 | 944-908 | Felt Packing | £1.00 |
|
| 17 | 944-910 | Urethane Washer (a) M40 | £2.40 |
|
| 18B | 332181 | Inner Cover | £0.00 |
|
| 18B | 332181 | Inner Cover | £0.00 |
|
| 18A | 998-412 | Inner Cover | £29.09 |
|
| 19 | 620-3VV | Ball Bearing 6203vvcmps2l | £8.86 |
|
| 20 | 944-911 | Bearing Cover (a) | £1.00 |
|
| 21A | 990-079 | Seal Lock Hex. Socket Hd. Bolt M5x16 | £1.00 |
|
| 22 | 600-1VV | Ball Bearing 6001vvcmps2l | £8.26 |
|
| 23 | 956-948 | Counter Gear | £29.09 |
|
| 24 | 620-1VV | Ball Bearing 6201vvcmps2l | £7.42 |
|
| 25 | 620-5DD | Ball Bearing 6205ddcmps2l | £12.97 |
|
| 26 | 956-949 | Bearing Cover | £1.95 |
|
| 27 | 956-951 | Crank Shaft Ass'y | £0.00 |
|
| 27 | 956-999Z | Crank Shaft Ass'y | £0.00 |
|
| 28 | 944-915 | Distance Ring (b) | £4.03 |
|
| 29A | 948-919 | Feather Key 4x4x15 | £1.00 |
|
| 29B | 956-850 | Woodruff Key 4x16 | £1.00 |
|
| 30 | 944-916 | Final Gear | £37.35 |
|
| 31 | 630-2VV | Ball Bearing 6302vvcmps2l | £9.17 |
|
| 32 | 944-918 | Pin D5x15.8 | £1.00 |
|
| 33A | 956-952 | Gear Cover (silver Green) | £0.00 |
|
| 34 | 949-455 | Spring Washer M6 (10 Pcs.) | £1.00 |
|
| 35 | 949-832 | Hex. Socket Hd. Bolt M6x45 (10 Pcs.) | £4.79 |
|
| 36A | 998-434 | Connecting Rod Ass'y | £43.80 |
|
| 37 | 944-921 | Needle Bearing (ntn 8e-nk 18/ |
£20.03 |
|
| 38 | 956-955 | Crank Washer | £3.75 |
|
| 39 | 949-457 | Spring Washer M8 (10 Pcs.) | £1.00 |
|
| 41A | 956-956 | Packing | £1.00 |
|
| 41B | 956-996 | O-ring (1as-60) | £3.52 |
|
| 42 | 956-957 | Piston | £37.82 |
|
| 43 | 944-927 | L-ring | £12.35 |
|
| 44 | 944-928 | Piston Pin | £15.55 |
|
| 45 | 956-958 | Striker | £85.63 |
|
| 46 | 956-959 | Cylinder Case (silver Green) | £0.00 |
|
| 46A | 332182 | Gear Cover | £0.00 |
|
| 46A | 332182 | Gear Cover | £0.00 |
|
| 46A | 332183 | Cylinder Case | £0.00 |
|
| 46A | 332183 | Cylinder Case | £0.00 |
|
| 47A | 949-759 | Hex. Socket Hd. Bolt M8x30 (10 Pcs.) | £7.86 |
|
| 47C | 306-163 | Nylock Hex. Socket Hd. Bolt M8x35 | £1.00 |
|
| 48 | 956-960 | Urethane Ring | £10.40 |
|
| 49 | 956-961 | Mouth Washer | £2.73 |
|
| 50 | 956-962 | Mouth Cover | £2.73 |
|
| 51 | 956-963 | Mouth | £32.05 |
|
| 52 | 956-964 | Shank Sleeve | £15.08 |
|
| 53 | 944-936 | O-ring | £14.32 |
|
| 54 | 956-965 | Damper | £13.64 |
|
| 55A | 956-966 | Seal Ring | £3.66 |
|
| 55B | 957-143 | Seal Ring (a) | £3.75 |
|
| 56A | 998-534 | Oil Felt | £0.00 |
|
| 57A | 957-136 | Felt Holder (b) Ass'y | £0.00 |
|
| 58 | 956-969 | Holder Seal | £1.00 |
|
| 59A | 307-028 | Tapping Screw (w/ |
£1.00 |
Not Available
|
| 59 | 949-217 | Machine Screw M4x12 (10 Pcs.) | £1.00 |
|
| 61 | 955-011 | Oil Gauge | £11.36 |
|
| 62 | 956-970 | Cover Plate | £4.00 |
|
| 63A | 956-971 | Cover Seal | £17.13 |
|
| 64 | 949-237 | Machine Screw M5x12 (10 Pcs.) | £1.00 |
|
| 64A | 991-690 | Seal Lock Hex. Socket Hd. Bolt M5x12 | £1.00 |
|
| 66B | 999-074 | Carbon Brush (auto Stop Type) (1 Pair) | £15.53 |
|
| 66 | 999-044 | Carbon Brush (1 Pair) | £4.06 |
|
| 67 | 940-540 | Brush Cap | £1.00 |
|
| 68 | 944-960 | Cap Rubber | £1.00 |
|
| 69 | 956-972 | Cap Cover | £1.00 |
|
| 70A | 957-152 | Front Cover | £31.90 |
|
| 72A | 949-760 | Hex. Socket Hd. Bolt M8x25 (10 Pcs.) | £5.97 |
|
| 72D | 306-437 | Nylock Hex. Socket Hd. Bolt M8x30 | £1.00 |
|
| 73 | 956-974 | Lever | £40.71 |
|
| 73A | 998-423 | Stop Lever | £37.35 |
|
| 74 | 956-975 | Lever Spring | £1.95 |
|
| 75 | 956-976 | Lever Washer | £4.76 |
|
| 75A | 998-425 | Damper (b) | £5.30 |
|
| 76 | 949-895 | Split Pin D4x25 (10 Pcs.) | £0.00 |
|
| 77A | 998-426 | Needle Roller | £1.00 |
|
| 77 | 943-364 | Needle Roller D4x20 | £1.00 |
|
| 78 | 956-977 | Tail Cover | £7.14 |
|
| 79C | 971-139 | Switch Ass'y (1p Screw Type) W/ |
£0.00 |
|
| 79D | 971-390 | Switch (a) (1p Screw Type) W/ |
£25.16 |
|
| 79 | 992-891 | Switch (a) (1p Screw Type) W/ |
£21.09 |
|
| 80 | 957-140 | Handle (b) | £0.00 |
|
| 80A | 957-146 | Handle Ass'y (silver Green) | £26.28 |
|
| 80B | 971-168 | Handle And Handle Cover Set | £31.76 |
|
| 81 | 949-652 | Hex. Socket Hd. Bolt M6x25 (10 Pcs.) | £3.55 |
|
| 83 | 958-049 | Cord Armor D8.2 | £1.00 |
|
| 84 | 500-452Z | Cord | £0.00 |
|
| 84 | 500-210Z | Cord | £20.03 |
|
| 84 | 500-230Z | Cord | £0.00 |
|
| 84 | 500-430Z | Cord | £0.00 |
|
| 84 | 971-136 | Cord | £0.00 |
|
| 84A | 500-472Z | Cord | £0.00 |
|
| 84B | 500-445Z | Cord | £0.00 |
|
| 84 | 500-202Z | Cord | £0.00 |
|
| 84 | 500-217Z | Cord | £0.00 |
|
| 84 | 500-398Z | Cord | £0.00 |
|
| 84 | 500-428Z | Cord | £0.00 |
|
| 84 | 500-404Z | Cord | £0.00 |
|
| 85 | 930-108 | Cord Clip | £0.00 |
|
| 86A | 958-523 | Machine Screw (w/ |
£1.00 |
|
| 86 | 949-292 | Machine Screw (brass) M4x6 (10 Pcs.) | £1.00 |
|
| 89 | 956-980 | Handle Cover (silver Green) | £17.04 |
|
| 89A | 957-141 | Handle Cover (b) | £0.00 |
|
| 89 A | 332174 | Handle Cover | £0.00 |
|
| 89 A | 332174 | Handle Cover | £0.00 |
|
| 90A | 956-981 | Support (a) | £0.00 |
|
| 90B | 971-133 | Support (c) | £0.00 |
|
| 90C | 971-163 | Support (d) | £0.00 |
|
| 90E | 312-408 | Support (f) | £8.12 |
|
| 90C | 332173 | Handle Ass'y | £0.00 |
|
| 90C | 332173 | Handle Ass'y | £0.00 |
|
| 91B | 956-852 | Side Handle Ass'y | £26.41 |
|
| 92A | 320-374 | Handle Stay (w/ |
£7.73 |
|
| 93B | 320-375 | Nylock Hex. Socket Hd. Bolt M8x16 | £2.28 |
|
| 94 | 944-950 | U-nut (b) M8 | £1.00 |
|
| 95 | 944-951 | Grip | £9.73 |
|
| 96 | 944-952 | Handle Shaft | £0.00 |
|
| 97 | 949-510 | Rivet D2.5x4.8 (10 Pcs.) | £1.00 |
|
| 99 | 931-848 | Lubricant Oiler (120cc) | £10.00 |
|
| 100 | 971-109 | Wrench 23mm | £0.00 |
|
| 101 | 872-422 | Hex. Bar Wrench 6mm | £1.00 |
|
| 102 | 944-459 | Hex. Bar Wrench 5mm | £1.00 |
|
| 104 | 944-961 | Bull Point 410mm | £26.54 |
|
| 106A | 314-170 | Case (steel) | £0.00 |
Not Available
|
| 108 | 949-454 | Spring Washer M5 (10 Pcs.) | £1.00 |
|
| 110 | 949-426 | Washer M8 (10 Pcs.) | £1.00 |
|
| 111 | 971-127Z | Distance Piece (a) | £0.00 |
|
| 112 | 971-128Z | Distance Piece (b) | £0.00 |
|
| 113 | 949-782 | Hex. Socket Hd. Bolt M6x50 (10 Pcs.) | £7.41 |
|
| 115 | 955-291 | Handle (a) | £0.00 |
|
| 115 | 981-866 | Handle (a) | £15.56 |
|
| 116A | 981-533Z | Switch (2p Pillar Type) W/ |
£26.46 |
|
| 116 | 971-824Z | Switch (2p Screw Type) W/ |
£31.78 |
|
| 117 | 954-017 | Tapping Screw D4x12 | £1.00 |
|
| 118 | 940-778 | Cord Armor D10.7 | £2.94 |
|
| 118 | 930-026 | Cord Armor D10.2 | £3.66 |
|
| 119 | 949-453 | Spring Washer M4 (10 Pcs.) | £1.00 |
|
| 120 | 937-631 | Cord Clip | £1.00 |
|
| 120 | 960-266 | Cord Clip | £1.00 |
|
| 121 | 956-384 | Tapping Screw D4x20 | £1.00 |
|
| 122 | 949-423 | Washer M4 (10 Pcs.) | £1.00 |
|
| 123 | 955-292 | Handle (b) | £12.24 |
|
| 123 | 981-867 | Handle (b) | £14.41 |
|
| 124 | 958-705 | Tapping Screw D4x25 | £1.00 |
|
| 125 | 956-998Z | Inner Race | £10.20 |
|
| 126 | 981-986Z | Support (a) | £0.00 |
|
| 127 | 956-853 | Lever Washer Ass'y | £0.00 |
|
| 128B | 990-940 | Distance Piece (c) | £1.00 |
|
| 129A | 996-364 | Seal Lock Hex. Socket Hd. Bolt M8x16 | £1.00 |
|
| 131 | 957-147 | Seal Lock Screw (w/ |
£0.00 |
|
| 131A | 984-750 | Tapping Screw (w/ |
£1.00 |
|
| 133 | 938-307 | Pillar Terminal | £3.05 |
|
| 134 | 963-243 | Support | £1.00 |
|
| 135 | 998-424 | Spring Case | £13.59 |
|
| 136A | 996-370 | Fan | £13.31 |
|
| 137 | 930-039 | Noise Suppressor | £2.20 |
|
| 138 | 959-144 | Terminal 50051 (10 Pcs.) | £3.36 |
|
| 139 | 318-656 | Stop Lever Ass'y | £73.03 |
|
| 140 | 307-635 | Machine Screw (w/ |
£1.00 |
|
| 141 | 959-141 | Connector 50092 (10 Pcs.) | £6.40 |
|
| 142 | 959-140 | Connector 50091 (10 Pcs.) | £4.52 |
|
| 143 | 994-273 | Noise Suppressor | £6.56 |
|
| 144 | 981-974 | Internal Wire | £1.92 |
|
| 145 | 305-798 | Internal Wire | £1.00 |
|
| 146 | 949-429 | Bolt Washer M4 (10 Pcs.) | £1.00 |
|
| 601 | 944-962 | Cold Chisel 410mm (hex. Shank Type) | £30.59 |
|
| 602 | 944-964 | Cutter W75x410l (round Shank Type) | £55.64 |
|
| 603A | 957-154 | Scoop 380l (round Shank Type) | £132.00 |
|
| 604 | 944-966 | Rammer Shank (hammer) | £49.24 |
|
| 605 | 944-965 | Rammer 200mm | £87.14 |
|
| 606 | 980-982 | Oil Felt 8.5mm | £0.00 |
|
| 607A | 957-153 | Service Kit (ph-65a) | £0.00 |
|
| 608 | 324-896 | Oil Felt | £0.00 |
|
Keep your Hitachi PH65A demolition hammer in working order with the correct replacement components. The PH65A is a powerful electric demolition hammer designed for heavy-duty breaking and chipping, and like any frequently used power tool, its mechanical and electrical components can eventually become worn or damaged.
If your Hitachi PH65A is not working, has lost power, is making unusual noises or is no longer delivering the impact it should, replacing the failed component may be enough to restore the machine. The PH65A parts diagram and parts list above provide a useful way to identify the individual components fitted to this demolition hammer and find the correct replacement part number.
Hitachi PH65A Parts Diagram
The Hitachi PH65A parts diagram shows the large number of individual components used throughout the demolition hammer. This includes the motor components, impact mechanism, gearbox and front assembly, as well as the housing, handles and smaller seals, washers and fasteners.
Using the numbered diagram alongside the parts list makes it easier to identify a component when you know which area of the hammer requires attention. This is particularly useful for older PH65A machines, where finding a part by its model number alone may not provide enough information to identify the exact component required.
The PH65A parts breakdown includes components such as the housing assembly, brush holder, stator, armature, bearings, cylinder case, counter gear, front cover, mouth assembly, shank sleeve, O-rings, seal rings, dampers and other internal parts.
PH65A Carbon Brushes & Motor Parts
Carbon brushes are an important service component on the Hitachi PH65A. Worn brushes can affect the operation of the motor and may contribute to poor performance, intermittent operation or a hammer that will not start. The PH65A parts list includes the brush holder, brush terminals and carbon brushes, with automatic-stop carbon brushes specified for some versions.
For more substantial motor repairs, PH65A armatures and stators are also identified in the parts information. Different armature and stator versions are listed for different voltage configurations, so it is particularly important to check the voltage and exact part number before ordering an electrical component.
Hitachi PH65A Hammer Repair Parts
The PH65A's heavy-duty impact mechanism contains numerous components that can wear with prolonged use. If the hammer has become noisy, has reduced impact or is suffering from excessive vibration, internal mechanical parts may need to be inspected.
Replacement components include bearings, washers, distance rings, felt packings, urethane washers, cylinder components, seals, dampers and gear components. The parts breakdown also identifies a counter gear and several bearings within the internal mechanism.
These smaller components are particularly important when rebuilding an older demolition hammer, as a worn seal, bearing or damper does not necessarily mean that the complete tool needs replacing.
PH65A Piston, Cylinder & Seals
The front section of the Hitachi PH65A demolition hammer contains a number of wear and sealing components associated with the impact mechanism. Parts information for the model includes the cylinder case, urethane rings and washers, mouth cover, mouth, shank sleeve, O-ring, damper and seal ring.
If your PH65A is showing signs of oil leakage, has lost impact performance or has damaged components around the tool-retainer and front mechanism, checking these parts against the diagram can help identify what needs replacing.
The PH65A O-ring, seal ring, urethane ring and damper are examples of relatively small components that can have an important role in keeping the internal mechanism properly sealed and cushioned.
Hitachi PH65A Front Cover & Tool Retainer Parts
The front end of the demolition hammer is subject to considerable wear during regular use. The PH65A parts breakdown includes the front cover, lever, stop lever, lever spring, lever washer, damper, mouth cover and shank sleeve, along with other components used around the tool-retaining mechanism.
If the tool-retaining mechanism is damaged or a component has become worn, use the PH65A parts diagram to identify the relevant item before ordering. Checking the individual part number is especially important when several similar-looking washers, seals and fittings are used in the same assembly.
Find Hitachi PH65A Parts Online
Whether you need Hitachi PH65A replacement parts for an electrical fault, motor repair or worn impact mechanism, the parts list above provides a convenient way to identify the component required.
You can find individual PH65A spare parts including carbon brushes, brush holders, armatures, stators, bearings, seals, O-rings, cylinder components, dampers, front-cover components and other mechanical parts. Some components are specific to particular voltage versions, so always compare the part number and voltage with your existing machine before ordering.
The PH65A may also appear in parts and repair information under the HiKOKI name, so searches for HiKOKI PH65A parts as well as Hitachi PH65A spare parts can be useful when looking for replacement components for this demolition hammer.
Use the Hitachi PH65A parts diagram above to locate the required component, match it with the numbered parts list and check the corresponding part number before ordering your replacement.