We are currently experiencing substantial delays with Hitachi/HiKOKI and Metabo spare parts due to the two brands merging warehouse. At this moment in time we are unable to provide confirmed delivery dates on out of stock parts, for any urgent requirements please contact us prior to ordering.
Enhance your Metabo 601229391 with our range of accessories
| Ref: | Part Number: | Description | Price | |
|---|---|---|---|---|
| 1 | 344100640 | Cable Sleeve | £2.95 | |
| 2 | 141116020 | Self-tap. Fill. H. Screw | £2.58 | |
| 3 | 343365780 | Motor Cap | £19.52 | |
| 4 | 343073940 | Electronic Unit 120 V | £52.67 | |
| 5 | 316033540 | Carbon Brush | £15.83 | |
| 6 | 141119900 | Self-tapp. Fill. H. Screw | £1.80 | |
| 7 | 343000480 | Brush Holder | £6.71 | |
| 8 | 338025840 | Rating Plate | £1.00 | |
| 9 | 343363830 | Motor Housing | £33.51 | |
| 11 | 311008820 | Field Coil 120 V | £39.63 |
NOT AVAILABLE
|
| 12 | 141121680 | Self-tap. Fill. H. Screw | £1.80 | |
| 13 | 343363850 | Baffle Cover | £6.71 | |
| 15 | 343406260 | Switch | £8.06 | |
| 16 | 141160290 | Cylindrical Pin | £1.80 | |
| 17 | 344489180 | Strand Cpl. Awg18sw | £2.58 | |
| 18 | 343363720 | Switch Rod | £4.45 | |
| 19 | 342001830 | Pressure Spring | £1.80 | |
| 20 | 316021590 | Switch Slide Cpl. | £5.62 | |
| 21 | 339124560 | Guide | £3.50 | |
| 22 | 141116970 | Fillister Head Screw | £2.58 | |
| 23 | 339187200 | Cable Clip | £2.58 | |
| 24 | 141116130 | Self-tap. Fill. H. Screw | £1.80 | |
| 25 | 343363840 | Cover | £8.06 | |
| 26 | 338116850 | Metabo Label | £1.00 | |
| 27 | 623902000 | Tren-end Spanner 19mm | £3.75 |
NOT AVAILABLE
|
| 28 | 344491110 | Cable Without Plug | £20.89 | |
| 29 | 141151320 | Washer | £2.58 | |
| 30 | 143113400 | Ball Bearing, 8x22x7 | £0.00 |
NOT AVAILABLE
|
| 31 | 310006660 | Armature Cpl. 120 V | £84.87 | |
| 32 | 316017080 | Dial Gauge Adjuster | £40.35 | |
| 33 | 141180090 | snap ring | £2.58 | |
| 34 | 143114020 | Ball Bearing, 15x35x11 | £11.67 | |
| 35 | 141112120 | Countersunk Screw | £1.80 | |
| 36 | 343360210 | Clamping Lever | £3.50 | |
| 37 | 341702130 | Hexagon Head Screw | £2.95 | |
| 38 | 339124980 | Support | £2.58 | |
| 39 | 341111560 | Handle Upper Part | £5.03 | |
| 40 | 316033050 | Handle Bottom Part | £5.62 | |
| 41 | 341052670 | Bolt | £2.58 | |
| 42 | 342001770 | Pressure Spring | £1.80 | |
| 43 | 339124490 | Slide | £4.45 | |
| 44 | 339004950 | Plate | £2.58 | |
| 45 | 141120070 | Fill. Head Screw(din 7985) | £1.80 | |
| 46 | 143192130 | O-ring | £2.58 | |
| 47 | 330000950 | Fan | £4.45 | |
| 48 | 141122320 | Countersunk Screw | £2.43 | |
| 49 | 339124720 | Bearing Flange | £11.67 | |
| 51 | 141180120 | Retaining ring | £2.58 | |
| 52 | 316021600 | Bearing Flange Cpl. | £53.57 | |
| 53 | 141116980 | Self-tap. Fill. H. Screw | £1.80 | |
| 54 | 341101500 | Flange Nut | £4.45 | |
| 55 | 631949000 | Collet 1/4" | £15.89 | |
| 56 | 343364110 | Trigger | £2.95 | |
| 57 | 342001980 | Pressure Spring | £4.01 | |
| 58 | 141113900 | Cap screw | £2.58 | |
| 59 | 341052660 | Sleeve | £2.58 | |
| 60 | 141152620 | Cup Spring | £1.80 | |
| 61 | 141111230 | Cap Screw | £1.80 | |
| 62 | 339000660 | Washer | £3.50 | |
| 63 | 141116780 | Fillister Head Screw | £1.80 | |
| 64 | 141115970 | Fillister Head Screw | £2.58 | |
| 65 | 344093280 | Compensating Washer | £3.50 | |
| 66 | 341052650 | Bush | £8.06 | |
| 67 | 143120300 | Ball | £1.80 | |
| 68 | 342000050 | Pressure Spring | £2.58 | |
| 69 | 341111320 | Handle Upper Part | £5.62 | |
| 70 | 341110800 | Thumbscrew | £2.95 | |
| 71 | 141150130 | Washer | £2.10 | |
| 72 | 343363630 | Guide | £8.06 | |
| 73 | 141113220 | Fillister Head Screw | £1.80 | |
| 74 | 631507000 | Fine-adjustment Parallel Edge Guide | £89.80 | |
| 76 | 341051890 | Guide Rod | £5.62 | |
| 77 | 141115000 | Grub Screw | £2.58 | |
| 78 | 341142480 | Bridge | £10.33 | |
| 79 | 342001760 | Pressure Spring | £2.58 | |
| 80 | 344350280 | Pointer | £10.33 | |
| 81 | 338113730 | Scale | £2.58 | |
| 83 | 315412570 | Guide Holder | £42.96 | |
| 85 | 141163410 | Tubular Rivet | £2.58 | |
| 86 | 342001820 | Pressure Spring | £3.50 | |
| 91 | 316025140 | Exhaust Nozzle | £17.10 | |
| 92 | 341111030 | Thumbscrew | £2.95 | |
| 93 | 339124480 | Support | £4.45 | |
| 94 | 316020730 | Base Plate Cpl. | £43.70 | |
| 95 | 339010870 | Insulating Plate | £1.80 | |
| 96 | 344100070 | Insert | £1.00 |
NOT AVAILABLE
|
| 97 | 143190060 | O-ring | £1.80 | |
| 98 | 316033040 | Handle Bottom Part | £5.03 | |
| 1001 | 338501220 | Diagram | £0.00 |
Two flute cutter 3mm diameter - C001AX1/4TC
Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 3.2mm diameter - C001BX1/4TC
Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 6.3mm diameter - C007X1/4TC
Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 6.3mm diameter - C008X1/4TC
Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 8.0mm diameter - C012AX1/4TC
Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 10mm diameter - C016X1/4TC
Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 12mm diameter - C019AX1/4TC
Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 12mm diameter - C019X1/4TC
Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 12.7mm diameter - C022X1/4TC
Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 15.0mm diameter - C024AX1/4TC
Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 20.0mm diameter - C030AX1/4TC
Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.
Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC
TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.
Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC
Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings
Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC
Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.
Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC
Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.
Self guided trimmer 12.7mm diameter - C116X1/4TC
Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.
Template profile 12.7mm diameter - C121X1/4TC
Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.
Biscuit jointer set - C152X1/4TC
Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)
Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC
Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.
Intumescent cutter set 10mm x 24mm - C209X1/4TC
Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.
Intumescent cutter set 15mm x 24mm - C220X1/4TC
Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.
Two flute cutter 15.9mm diameter - TR19X1/4TC
Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.
Two flute cutter 19.1mm diameter - TR20X1/4TC
Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.
Radius 5mm radius and 18mm diameter - TR21X1/4TC
Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.
Chamfer V groove cutter angle=45 degrees - TR22X1/4TC
Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.
Guided trimmer 6.35mm x 12.7 - TR23X1/4TC
Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut
Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC
Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut
Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC
Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut
Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC
Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut
Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC
Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut
Guided trimmer 12.7mm x50mm - TR28X1/2TC
Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut
Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.
Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.
Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC
Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.
Guided ovolo over 9.5mm radius - TR32X1/4TC
Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.
Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC
Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.
Biscuit jointer set - TR35X1/4TC
Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut
Two flute cutter 15mm diameter - TR40DX1/4TC
Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.
Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.
This model also has 39 accessories available.
Scroll down to view them.
