3612 Spares and Parts for MAKITA 3612 (WOODWORKING)

Ref:	Part Number:	Description	Price
1	266021-4	PT SCREW 5X20 HM1303	£1.00
2	415450-0	REAR COVER 3612	£9.00
5	159730-1	MOTOR HOUSING COMPLETE 3612	£78.90
6	851516-6	NAME PLATE 3612	£1.00
7	636056-3	FIELD 110V 3612	£47.10
7	636059-7	FIELD 240V 3612	£47.10
8	415069-5	BAFFLE PLATE 3612C/3612	£3.60
9	210078-7	BALL BEARING 629DDW	£5.40
9	211092-6	BALL BEARING VC3211M/3612/C/	£6.20
10	681633-6	*INSULATION WASHER 5903R/3612/	£2.60
11	516586-9	ARMATURE ASSY 110V 3612	£99.30
11	516589-3	ARMATURE ASSY 240V 3612	£99.30
12	241878-4	FAN 83	£0.00	Contact Us
13	285657-0	BEARING RETAINER 50 3612BR/RP1	£1.00
14	211326-7	BALL BEARING 2012DDW/3612	£8.60
15	415070-0	KNOB (L) 3612C/3612	£8.50
16	150443-7	*MOTOR BRACKET COMP 3612C	£53.20
16	152567-5	MOTOR BRACKET COMPLETE 3612C/3	£64.20
17	231142-1	COMPRESSION SPRING 10	£1.00
18	323559-3	HALF NUT 3600B/3612	£1.00
19	911263-2	PAN HD SCREW M5X40 W/CP WASHE	£1.00
20	763629-0	COLLET NUT 3612BR/M3600	£10.22
21	763622-4	COLLET CONE 12.7 3612BR/M3600	£30.84
22	911368-8	*P H SCREW M5X40	£1.00
23	415407-1	KNOB (R) 3612C	£7.20
24	231618-8	TORSION SPRING 15 3612C	£1.00
25	266015-9	SET BOLT M10 3612C	£6.20
26	344097-2	LOCK LEVER 3612C	£2.20
27	265269-5	HEX HD SCREW M5X12 3600B	£1.00
28	286235-9	CAP 11 3612BR	£1.00
29	962062-5	INTERNAL INVERTED RING-12	£1.00
30	256606-4	PIN 6 9600	£3.90
31	231037-8	COMPRESSION SPRING 7 GA/SA	£1.00
32	251861-3	KNURL THUMB SETSCREW M10X78	£1.90
33	251295-0	COUNTERSUNK HEAD SCREW M4X14	£1.00
34	911944-8	PAN HD SCREW M5X80 W/CP WASHE	£2.00
35	643700-5	BRUSH HOLDER CAP 7-18 GA7050/	£1.00
36	191953-5	CARBON BRUSH CB-203 3612C/241	£5.80
37	682503-2	CORD GUARD UH45570/5570/5580	£1.00
37	682505-8	CORD GUARD 10-90 HS6100/7100	£1.00
37	682540-6	CORD GUARD HS6100/7100/MT852	£1.00
38	687052-4	STRAIN RELIEF HS7100/BO5041	£1.00
38	687053-2	STRAIN RELIEF 110V UK360/HS61	£1.00
39	265995-6	TAPPING SCREW 4X18	£1.00
40	663565-9	Price on application	£0.00	Contact Us
40	692117-9	POWER SUPPLY CORD 1.5-2-2.5	£9.40
40	692527-0	LEAD WIRE HS7100/GD0801C/HP16	£21.10
40	695217-4	POWER SUPPLY CORD HS6100/7100	£8.70
40	663839-8	POWER SUPPLY CORD 1.5-2-2.5	£8.40
41	316499-2	BEARING BOX 3612C	£7.70
42	265995-6	TAPPING SCREW 4X18	£1.00
43	252625-8	WING NUT M10 3612BR	£1.90
44	410129-8	NYLON NUT M10 RP1100C/3612BR	£1.00
45	645200-1	NOISE SUPPRESSOR	£3.00
45	645253-0	NOISE SUPPRESSOR 110V	£3.90
46	651419-2	*SWITCH ALD164 3612C	£16.40
46	651430-4	SWITCH RP1801/3612C	£11.00
47	415409-7	COVER 3612C	£7.60
48	265995-6	TAPPING SCREW 4X18	£1.00
49	314062-5	POLE 3600B	£1.00
50	231329-5	COMPRESSION SPRING 11 3612BR	£1.00
51	151407-4	BASE COMPLETE 3612C	£76.60
52	924206-5	WING SCREW M5X10 N1923BDD	£1.00
53	410128-0	CHIP DEFLECTOR 3612BR	£2.80
54	912112-6	COUNTERSUNK SCREW M4X10 RP090	£1.00
56	413063-1	BASE PLATE 3612C	£8.70
57	134205-1	STOPPER ASSY 3612BR	£7.10
58	931202-6	HEX FULL NUT M5 RP0900/AN510	£1.00
59	265335-8	*HEX HD SCREW M5X28	£1.00
60	231231-2	COMPRESSION SPRING 12 3600B	£1.00
61	251423-7	SLOTTED HD SHOULDER BOLT M6	£1.00
62	931202-6	HEX FULL NUT M5 RP0900/AN510	£1.00
63	265336-6	*HEX HD SCREW M5X40	£1.00
64	931202-6	HEX FULL NUT M5 RP0900/AN510	£1.00
65	265333-2	*HEX HD SCRWE M5X16 3620	£1.00
66	231240-1	COMPRESSION SPRING 7 RP0900/	£1.00
67	924216-2	WING SCREW M5X15	£1.00
1001	342428-9	STRAIGHT GUIDE 3600B/M3600	£12.78
1002	781213-9	WRENCH 8 RP1110C/3600B/3612BR	£3.62
1003	781030-7	WRENCH 24	£6.80
1006	763805-6	COLLET SLEEVE FOR 3/8" BIT	£7.56
1007	763803-0	COLLET SLEEVE FOR 1/4" BIT	£8.50
1008	924311-8	WINGSCREW M6X12 LS1020	£1.50
1009	942151-2	*SPRING WASHER 6	£1.00
1010	941151-9	FLAT WASHER 6 DIN125-B BHS630	£1.00
1011	122256-6	GUIDE HOLDER ASS'Y	£33.26
1012	251830-4	THUMB SETSCREW M10X34 3600B	£2.20
5001	415412-8	DUST NOZZLE 3612C/M3600	£25.18
5002	231372-4	COMPRESSION SPRING 5 5016NB	£1.00
5003	231794-8	TENSION SPRING 4 3612C	£2.50
5004	233024-3	COMPRESSION SPRING 4 6702D	£1.00
5005	256221-4	PIN 3 DST111/DST112/JR3020	£1.00
5006	265995-6	TAPPING SCREW 4X18	£1.00
5007	266016-7	*PIVOT SCREW M5X10 3612C	£3.90
5008	286239-1	CAP 14 3612C	£1.90
5009	344098-0	LOCK PLATE 3612C	£6.50
5010	415158-6	SWITCH LEVER JR3020/4304	£3.20
5011	415408-9	KNOB COVER 3612C	£5.70
5012	415411-0	LOCK-OFF BUTTON 3612C	£1.90
5015	253811-4	THIN BLUE WASHER 5 BFS440/683	£1.00

Accessories for Makita 3612

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £10.50

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £13.73

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £8.82

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:

Price: £11.00

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:

Price: £11.00

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £13.01

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:

Price: £16.57

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £12.69

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:

Price: £14.90

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:

Price: £14.06

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:

Price: £14.90

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:

Price: £14.90

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £23.19

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:

Price: £27.60

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £32.01

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:

Price: £16.15

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

Price: £17.09

Biscuit jointer set - C152X1/2TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/2 inch Includes:

Price: £33.60

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:

Price: £33.60

Two flute cutter 12.7mm diameter - C153DX1/2TC

Two flute cutter 12.7mm diameter X 50.0mm with centre tip for plunge cutting in abrasive metals, softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=2 inches Cut length=50 mm Shank Diameter=1/2 inch Includes:

Price: £23.19

Two flute cutter 12.7mm diameter - C153X1/2TC

Two flute cutter 12.7mm diameter X 50.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=2 inches Cut length=50 mm Shank Diameter=1/2 inch Includes:

Price: £14.90

Two flute cutter 12.7mm diameter - C164X1/2TC

Two flute cutter 12.7mm diameter X 63.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=2 1/2 inches Cut length=63 mm Shank Diameter=1/2 inch Includes:

Price: £20.97

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:

Price: £13.73

Two flute cutter 12mm diameter - C172X1/2TC

Two flute cutter 12.0mm diameter X 63.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=2 1/2 inches Cut length=63 mm Shank Diameter=1/2 inch Includes:

Price: £20.97

Aquamac 21 Recesser 54.5mm diameter - C207X1/2TC

Aquamac 21 Recesser 46.3 mm diameter. Comes complete with a guide bearing to reduce setting up time and simplify machining operations.

D=46.3 mm D2=34.3 mm C=10.3mm C2=2.7 mm B=28.6 mm OL=90 mm Shank Diameter=1/2 inch Includes:

Price: £50.19

Intumescent cutter set 10mm x 40mm - C208X1/2TC

Neat cut intumescent cutter set, 40mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=40 mm C=10 mm B=32 mm E=4 mm Shank Diameter=1/2 inch Includes:

Price: £38.02

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

Price: £26.44

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

Price: £27.71

Sub base for Makita 3612C - GB/5/J

Solid laminate. Accepts Trend Guide Bushes. Supplied with line-up pin and bush. Ensures concentricity of cutter and guide bush. Suitable for : Makita 3612C, 3612

Diameter=170mm Thickness=8mm Includes: 1 x Sub base 1 x Template Guide Bush 1 x 1/2" Line-up pin 1 x 1/4" Line-up pin

Price: £26.23

Two flute cutter 12.7mm diameter - TR17DX1/2TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 12.7mm diameter X 50.0mm cut.

D=1/2 inch D=12.7 mm C=50 mm OL=93 mm Shank Diameter=1/2 inch Includes:

Price: £25.92

Two flute cutter 12.7 diameter 12.7mm diameter - TR17X1/2TC

Two flute cutter for a clean finish. 12.7mm diameter X 50.0mm cut.

D=1/2 inch D=12.7 mm C=50 mm OL=94 mm Shank Diameter=1/2 inch Includes:

Price: £22.04

Two flute cutter 12.7mm diameter - TR18DX1/2TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 12.7mm diameter X 63.0mm cut.

D=1/2 inch D=12.7 mm C=63 mm Shank Diameter=1/2 inch Includes:

Price: £29.80

Two flute cutter 12.7mm diameter - TR18X1/2TC

Two flute cutter for a clean finish. 12.7mm diameter X 63.0mm cut.

D=1/2 inch D=12.7 mm C=63 mm OL=106 mm Shank Diameter=1/2 inch Includes:

Price: £25.39

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:

Price: £20.97

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £17.63

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £15.95

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:

Price: £16.57

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:

Price: £19.31

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

Price: £26.44

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:

Price: £38.02

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:

Price: £23.19

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:

Price: £43.05

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:

Price: £36.95

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £39.17

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £28.36

Bearing guided rebater 12.7mm - TR34X1/2TC

Bearing guided rebater, includes 3 extra bearings (9.5mm, 15.9mm and 19.1mm)

D=35mm C=12.7mm Shank Diameter=1/2 inch Includes:

Price: £37.48

Biscuit jointer set - TR35X1/2TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/2 inch Includes:

Price: £42.41

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £42.41

Two flute cutter 12mm diameter - TR37X1/2TC

Two flute cutter for a clean finish. 12.0mm diameter X 63.0mm cut.

D=12 mm C=54 mm OL=115 mm Shank Diameter=1/2 inch Includes:

Price: £29.77

Two flute cutter 15mm diameter - TR40DX1/2TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm OL=63 mm Shank Diameter=1/2 inch Includes:

Price: £22.56

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:

Price: £22.56

Intumescent cutter set 10mm x 40mm - TR41X1/2TC

Bearing guided intumescent recesser, 40.0mm diameter X 10.0mm cut.

D=40 mm Cut length=10 mm B=32 mm E=4 mm Shank Diameter=1/2 inch Includes:

Price: £38.63

Intumescent cutter set 15mm x 40mm - TR42X1/2TC

Bearing guided intumescent recesser, 40.0mm diameter X 15.0mm cut.

D=40 mm Cut length=15 mm B=32 mm E=4 mm Shank Diameter=1/2 inch Includes:

Price: £39.70

Brush - 342042 (CB200)

Carbon brushes (PAIR) May go by part no's CB202 CB203 CB204 CB205 dimensions 7x18x16.

Price: £6.46

Template Guide Bush - 164471-6

(30mm Outside Dia) Template guide bush. Suitable with corresponding worktop jigs.

Price: £14.78

Collet - 763622-4

A 12.7mm cone collet to fit Makita Routers.

Price: £30.84

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

Price: £17.30

Router Cutter - TR47X1/2TC

Bearing guided roman ogee, by raising the cutter the top is quickly removed. 25.4mm diameter.

Price: £33.60

Buy Replacement Parts and Accessories for the Makita 3612

61 Compatible Accessories Available!

Accessories for Makita 3612

Contact Info

Secure Shopping

Our Service

Help And Advice

Your Account

Recently Viewed