3612BR Spares and Parts for MAKITA 3612BR (WOODWORKING)

Ref:	Part Number:	Description	Price
1	252625-8	WING NUT M10 3612BR	£1.90
2	410129-8	NYLON NUT M10 RP1100C/3612BR	£1.00
3	157109-0	MOTOR HOUSING 3612BR	£38.60
4	851519-0	NAME PLATE 3612BR/3612	£1.00
4	854939-7	*NAME PLATE 3612BR/3612	£1.00
5	953106-2	RIVET 0-5 9402/1806B	£1.00
6	524706-1	FIELD 110V 3612BR	£35.80
6	524709-5	FIELD 240V 3612BR	£35.80
7	911938-3	*PAN HD SCREW M6X85	£1.80
8	251295-0	COUNTERSUNK HEAD SCREW M4X14	£1.00
9	211326-7	BALL BEARING 2012DDW/3612	£8.60
10	410127-2	KNOB L 3612BR	£3.50
11	155763-4	MOTOR BRACKET 3612BR	£51.10
12	231142-1	COMPRESSION SPRING 10	£1.00
13	323559-3	HALF NUT 3600B/3612	£1.00
14	911263-2	PAN HD SCREW M5X40 W/CP WASHE	£1.00
14	911261-6	PAN HD SCREW M5X40 W/SP WASHE	£1.00
15	763629-0	COLLET NUT 3612BR/M3600	£10.22
16	763628-2	COLLET CONE 12MM	£30.84
17	911363-8	PAN HEAD SCREW M6X40	£0.00	Contact Us
18	410126-4	KNOB R 3612BR	£3.50
19	231574-2	TORSION SPRING 15 3600B	£5.50
20	265813-8	SET BOLT M10 3600B (N0666)	£3.90
21	341933-3	LOCK LEVER 3600B (N0666)	£1.00
23	265269-5	HEX HD SCREW M5X12 3600B	£1.00
24	962062-5	INTERNAL INVERTED RING-12	£1.00
25	256606-4	PIN 6 9600	£3.90
26	231037-8	COMPRESSION SPRING 7 GA/SA	£1.00
27	251861-3	KNURL THUMB SETSCREW M10X78	£1.90
28	285657-0	BEARING RETAINER 50 3612BR/RP1	£1.00
29	241823-9	FAN 92	£4.40
30	514820-1	ARMATURE 110V 3612BR	£88.00
30	514824-3	ARMATURE 240V 3612BR	£88.00
31	681624-7	*INSULATION WASHER HM1400	£1.00
31	681635-2	INSULATION WASHER HM1200K/HM1	£1.00
32	211087-9	BALL BEARING VC3211M/KP0810/C	£6.90
33	253913-6	*WAVE WASHER 20 2710	£1.00
34	924206-5	WING SCREW M5X10 N1923BDD	£1.00
35	410258-7	BAFFLE PLATE 3612BR/3600B	£1.00
36	410128-0	CHIP DEFLECTOR 3612BR	£2.80
37	645253-0	NOISE SUPPRESSOR 110V	£3.90
38	651471-0	*SWITCH STE215KD	£10.10
38	651481-7	SWITCH STE215K HM1100C/HM1202C	£19.90
39	911133-5	PAN HD SCREW M4X18 KP0810C	£1.00
40	687031-2	STRAIN RELIEF HK1820L/3601B	£1.00
41	410297-7	SWITCH COVER 3612BR	£2.20
42	911143-2	PAN HEAD SCREW M4X22	£1.00
43	652102-4	PLASTIC HEX NUT M12	£1.00
44	643650-4	BRUSH HOLDER CAP CB-5/HS6100	£1.00
45	181044-0	CARBON BRUSH CB-153 (CB-22)/9	£3.70
46	682502-4	CORD GUARD 8-85 3707/N1923B	£1.00
47	663565-9	Price on application	£0.00	Contact Us
47	692117-9	POWER SUPPLY CORD 1.5-2-2.5	£9.40
48	314062-5	POLE 3600B	£1.00
49	231329-5	COMPRESSION SPRING 11 3612BR	£1.00
50	151158-9	BASE COMPLETE 3612BR	£75.50
51	924216-2	WING SCREW M5X15	£1.00
52	231240-1	COMPRESSION SPRING 7 RP0900/	£1.00
53	265333-2	*HEX HD SCRWE M5X16 3620	£1.00
54	931202-6	HEX FULL NUT M5 RP0900/AN510	£1.00
55	265336-6	*HEX HD SCREW M5X40	£1.00
56	931202-6	HEX FULL NUT M5 RP0900/AN510	£1.00
57	251423-7	SLOTTED HD SHOULDER BOLT M6	£1.00
58	231231-2	COMPRESSION SPRING 12 3600B	£1.00
59	265335-8	*HEX HD SCREW M5X28	£1.00
60	931202-6	HEX FULL NUT M5 RP0900/AN510	£1.00
61	134205-1	STOPPER ASSY 3612BR	£7.10
62	911206-4	PAN HD SCREW M5X10 W/SP WASHE	£1.00
63	912112-6	COUNTERSUNK SCREW M4X10 RP090	£1.00
64	413024-1	BASE PLATE 3612BR	£6.10
67	286235-9	CAP 11 3612BR	£1.00
400	154233-0	HOLDER 3600B	£18.20
401	251830-4	THUMB SETSCREW M10X34 3600B	£2.20
402	342427-1	PLATE HOLDER 3601B	£3.00
403	941101-4	FLAT WASHER 5 DIN125-B RP0900	£1.00
404	942101-7	SPRING WASHER 5	£1.00
405	924206-5	WING SCREW M5X10 N1923BDD	£1.00
406	163053-1	ROLL 3600B	£3.30
407	342428-9	STRAIGHT GUIDE 3600B/M3600	£12.78
408	941151-9	FLAT WASHER 6 DIN125-B BHS630	£1.00
409	942151-2	*SPRING WASHER 6	£1.00
410	924311-8	WINGSCREW M6X12 LS1020	£1.50
411	763803-0	COLLET SLEEVE FOR 1/4" BIT	£8.50
412	763805-6	COLLET SLEEVE FOR 3/8" BIT	£7.56
413	781213-9	WRENCH 8 RP1110C/3600B/3612BR	£3.62
414	781030-7	WRENCH 24	£6.80
415	344364-5	TEMPLATE GUIDE 3600B	£12.78
416	D-07901	Price on application	£14.56
416	793088-4	Price on application	£23.70
500	122256-6	GUIDE HOLDER ASS'Y	£33.26
501	123022-4	TRIMMER GUIDE ASS'Y	£8.10
900	232103-4	LEAF SPRING	£0.00	Contact Us
901	911219-5	Price on application	£0.00	Contact Us

Accessories for Makita 3612BR

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £10.50

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £13.73

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £8.82

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:

Price: £11.00

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:

Price: £11.00

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £13.01

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:

Price: £16.57

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £12.69

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:

Price: £14.90

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:

Price: £14.06

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:

Price: £14.90

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:

Price: £14.90

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £23.19

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:

Price: £27.60

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £32.01

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:

Price: £16.15

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

Price: £17.09

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:

Price: £33.60

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:

Price: £13.73

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

Price: £26.44

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

Price: £27.71

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:

Price: £20.97

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £17.63

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £15.95

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:

Price: £16.57

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:

Price: £19.31

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

Price: £26.44

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:

Price: £38.02

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:

Price: £23.19

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:

Price: £43.05

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:

Price: £36.95

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £39.17

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £28.36

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £42.41

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:

Price: £22.56

Brush - 04001 (CB-152)

Carbon brushes (PAIR) May go by part no's CB-153 CB-154 Dimensions 6.5x13.5x16.

Price: £6.12

Brush Holder Cap - 643650-4

Brush Holder Cap(CB5/9402)17mm Dia located on outside of machine for access to brush

Price: £1.00

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

Price: £17.30

Buy Replacement Parts and Accessories for the Makita 3612BR

41 Compatible Accessories Available!

Accessories for Makita 3612BR

Contact Info

Secure Shopping

Our Service

Help And Advice

Your Account

Recently Viewed