Makita DCG180 Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 1 | 142071-2 | PISTON A COMPLETE | £4.25 |
|
| 1 | 142072-0 | PISTON B DCG180 | £5.05 |
|
| 2 | 266827-0 | PAN HEAD SCREW M3X18 WITH WR | £1.00 |
|
| 3 | 454275-7 | HOLDER A | £11.63 |
|
| 3 | 141861-0 | HOLDER B COMP DCG180 | £36.95 |
|
| 4 | 265074-0 | PAN HEAD SCREW M5X16 | £1.00 |
|
| 5 | 346649-5 | PLATE | £1.00 |
|
| 6 | 454223-6 | HOLDER JOINT A | £6.15 |
|
| 6 | 318958-2 | HOLDER JOINT B DCG180 | £7.35 |
|
| 7 | 142041-1 | RACK 42 COMPLETE | £35.35 |
|
| 7 | 142042-9 | RACK 64 COMP DCG180 | £35.95 |
|
| 8 | 815F86-5 | NAME PLATE DCG180 | £1.00 |
|
| 9 | 266429-2 | TAPPING SCREW 3X16 TD126/ |
£1.00 |
|
| 10 | 187618-5 | HOUSING SET BCG180 | £35.35 |
|
| 11 | 418821-0 | LENS | £1.75 |
|
| 12 | 620180-2 | SUB CONTROLLER | £18.35 |
|
| 13 | 225097-0 | SYNCHRO BELT 4-176 | £4.95 |
|
| 14 | 142038-0 | SPUR GEAR 9A COMPLETE | £22.65 |
|
| 16 | 454230-9 | LENS | £2.25 |
|
| 18 | 126253-4 | GEAR ASSEMBLY | £88.30 |
|
| 19 | 142066-5 | MOTOR COMPLETE BCG180 | £41.65 |
|
| 20 | 643860-3 | TERMINAL DHP480/ |
£4.25 |
|
| 21 | 632A61-4 | CONTROLLER UNIT BCG180 | £89.80 |
|
| 22 | 650632-9 | SWITCH CG100D/ |
£18.25 |
|
| 23 | 451162-1 | LOCK LEVER CG100D/ |
£5.85 |
|
| 24 | 187618-5 | HOUSING SET BCG180 | £35.35 |
|
| 25 | 961011-9 | EXT E-RING JIS E-4 EA3201 | £1.00 |
|
| 26 | 267465-1 | FLAT WASHER 5 | £1.00 |
|
| 27 | 227311-0 | SPUR GEAR 19B | £2.35 |
|
| 28 | 227309-7 | INTERNAL GEAR 48 | £7.65 |
|
| 29 | 454220-2 | SPACER | £2.15 |
|
| 30 | 213768-1 | OIL SEAL 30 | £2.45 |
|
| 31 | 211294-4 | BALL BEARING 6806LLU HR2300 | £8.75 |
|
| 32 | 141860-2 | CARRIER A COMPLETE | £6.25 |
|
| 33 | 313253-5 | CARRIER B | £4.35 |
|
| 34 | 256255-7 | PIN 3 | £1.00 |
|
| 35 | 227312-8 | SPUR GEAR 10 | £13.05 |
|
| 36 | 211482-3 | BALL BEARING 6803LLU | £7.65 |
|
| 37 | 454219-7 | GEAR HOUSING | £15.85 |
|
| 38 | 313257-7 | MAGNET | £3.55 |
|
| 39 | 141859-7 | SPUR GEAR 9C COMPLETE | £22.15 |
|
| 40 | 227309-7 | INTERNAL GEAR 48 | £7.65 |
|
| 41 | 227310-2 | SPUR GEAR 19A | £3.65 |
|
| 42 | 141858-9 | SPUR GEAR 9B COMPLETE | £3.95 |
|
| 43 | 227310-2 | SPUR GEAR 19A | £3.65 |
|
| 44 | 267466-9 | FLAT WASHER 12 | £1.00 |
|
| 45 | 266429-2 | TAPPING SCREW 3X16 TD126/ |
£1.00 |
|
| 46 | 346721-3 | PLATE 23 | £1.75 |
|
| 47 | 234315-5 | COMPRESSION SPRING 6 | £2.05 |
|
| 48 | 318958-2 | HOLDER JOINT B DCG180 | £7.35 |
|
| 1001 | 195246-2 | Safety Goggle's | £4.68 |
|
| 1002 | ***DC18RC | 18V CHARGER | £17.79 |
|
| 1002 | 123221-8 | PISTON C ASSY BCG180RFB | £26.75 |
|
| 1003 | 194204-5 | Battery Pack, Lithium-ion, 18V, 5.0Ah | £231.70 |
|
| 1003 | 142071-2 | PISTON A COMPLETE | £4.25 |
|
| 1004 | 266827-0 | PAN HEAD SCREW M3X18 WITH WR | £1.00 |
|
| 1004 | 821568-1 | PLASTIC CASE | £92.90 |
|
| 1005 | 424547-4 | RUBBER RINGS BCG180RFB | £1.95 |
|
| 1005 | 802X70-7 | LABEL/ |
£1.85 |
|
| 1006 | 454226-0 | NOZZLE | £5.92 |
|
| 1007 | ***DC18RC | 18V CHARGER | £17.79 |
|
| 1008 | 194204-5 | Battery Pack, Lithium-ion, 18V, 5.0Ah | £231.70 |
|
| 1009 | 821568-1 | PLASTIC CASE | £92.90 |
|
| 1010 | 802X71-5 | PLASTIC CASE LABEL DCG180 | £3.65 |
|
| 1010 | 803L40-7 | DCG180ZBK PLASTIC CASE LABEL | £0.00 |
|
The Makita DCG180 is an 18V LXT cordless caulking gun designed for controlled application of sealants, adhesives and other materials. It uses a variable-speed trigger and dial, with a maximum pushing force of 5,000N and compatibility with different cartridge, sausage-pack and bulk-sealant arrangements. Depending on the configuration, the DCG180 can be used with 300ml, 600ml and 800ml holders.
If your Makita DCG180 is not working, is not pushing sealant correctly, has developed a problem with the trigger, motor or rack, or the holder has been damaged, individual DCG180 spare parts can be identified from the parts diagram and list above.
Makita DCG180 Parts Diagram and Parts List
The DCG180 parts diagram breaks the caulking gun down into the holder and piston assembly, rack, housing, motor, controller and gearbox. This is particularly useful because the DCG180 has several different components depending on whether it is being used with cartridges, sausage packs or bulk sealant.
The parts list includes piston A, piston B, holder A, holder B, holder joints, rack assemblies, housing, controller, motor, switch and gear assembly, together with the smaller bearings, gears, pins, washers and springs used inside the drive mechanism.
DCG180 Piston and Holder Parts
The piston and holder are directly involved in pushing sealant through the cartridge or pack. The parts catalogue identifies 142071-2 piston A complete and 142072-0 piston B complete, while 123221-8 piston C assembly is also associated with the DCG180 parts system.
The holder arrangement varies according to the material and container being used. Parts include 454275-7 holder A, 141861-0 holder B complete, 454223-6 holder joint A and 318958-2 holder joint B.
If the DCG180 is not pushing sealant, the piston, holder, joints and associated components are worth checking. A damaged piston or incorrectly matched holder can prevent the ram from applying consistent pressure to the material.
DCG180 Rack and Sealant Drive Parts
The rack transfers the movement generated by the motor and gearbox into the forward movement needed to dispense sealant. The parts list includes 142041-1 rack 42 complete and 142042-9 rack 64 complete, providing different rack configurations for the DCG180.
If the Makita DCG180 rack is slipping, the ram is moving unevenly or the tool makes a clicking or grinding noise while attempting to dispense material, the rack and drive mechanism should be inspected.
The rack works alongside the spur gears, internal gears and carrier assemblies within the gearbox, so a problem with the dispensing movement does not necessarily originate with the piston itself.
DCG180 Motor and Controller Parts
The DCG180 uses a dedicated motor and electronic control system to provide variable dispensing speed. The parts breakdown identifies 142066-5 motor complete, 620180-2 sub controller and 632A61-4 controller unit.
If your DCG180 has power but the motor will not run, the battery terminal, switch, controller and motor should all be considered when diagnosing the fault. Electronic protection is also incorporated into the tool, so an overload condition can affect operation.
The 643860-3 terminal is separately listed and forms part of the battery connection between the 18V LXT battery and the tool.
DCG180 Switch and Lock Lever
The operator controls include the main switch and lock mechanism. The parts list identifies 650632-9 switch and 451162-1 lock lever.
If the DCG180 switch is not working, the trigger does not respond or the tool will not operate when the battery is fitted, these components should be checked alongside the controller and battery connection.
A problem with the lock lever can also prevent the switch from operating as intended, particularly if the tool has been subjected to heavy site use or has suffered damage around the handle.
DCG180 Gearbox, Gears and Bearings
The motor drives a reduction gearbox containing several gears, carriers and bearings. The parts breakdown includes 126253-4 gear assembly, 142038-0 spur gear 9A complete, 227311-0 spur gear 19B, 227309-7 internal gear 48, 141860-2 carrier A complete and 313253-5 carrier B.
The gearbox also contains 211294-4 ball bearing 6806LLU, 211482-3 ball bearing 6803LLU and 213768-1 oil seal 30.
If the DCG180 is making unusual noises or the motor runs without correctly moving the rack, the gears, bearings and oil seal should be inspected. Damage to one of the smaller gears can affect the entire dispensing mechanism.
DCG180 Housing and Small Mechanical Parts
The outer housing protects the electrical and mechanical assemblies while supporting the holder and drive system. The parts list identifies 187618-5 housing set, along with lenses, plates, screws and smaller internal components.
The gearbox also contains individual components such as 256255-7 pin 3, 267465-1 flat washer 5, 267466-9 flat washer 12, 346721-3 plate 23 and 234315-5 compression spring 6.
These smaller DCG180 parts can be useful when repairing a tool that has been dismantled or when a particular fixing or internal component has become damaged.
Choosing the Right Makita DCG180 Parts
When searching for Makita DCG180 parts online, check the exact configuration of your caulking gun before ordering. Holder, piston and rack arrangements can differ according to the type of sealant container being used, while the parts system also includes components associated with related Makita caulking guns.
From the DCG180 piston and holder assemblies to the rack, motor, controller, switch, battery terminal, gearbox, gears, bearings and housing components, the detailed parts list provides a useful reference when identifying the component required.
Matching the original Makita part number with the DCG180 parts diagram is the best way to select the correct DCG180 spare parts for your caulking gun.