Skip to main content

Makita DCL180 Parts

Drawings
HOUSING SET
£13.75
HOUSING SET
£13.85
SWITCH V-15-3A6 DUM166/168/DU
£3.05
COMPRESSION SPING 4 CL106D
£1.00
SWITCH LEVER BCL140/180
£1.00
CONTROLLER UNIT
£12.65
TERMINAL DHP480/DDF480/DFL650
£4.25
SPONGE SHEET 15-25 BCL140/180
£1.00
MOTOR ASSY DCL180/BCL180
£13.15
FAN COVER 4093D/BCL140/BCL18
£1.00
RUBBER RING BCL140/180
£2.05
HOUSING SET
£13.75
HOUSING SET
£13.85
TAPPING SCREW 3X16 TD126/DUM
£1.00
NAME PLATE DCL180
£1.95
*STAY CL183D/BCL140/BCL180
£2.15
FILTER BCL140/180/CL183D
£1.00
PRE-FITER CL183D/BCL/CL070
£3.25
TAPPING SCREW 4X18
£1.00
FLAT WASHER 4 DIN125 - B BHX2
£1.00
VALVE CL183D/BCL/CL106FD
£1.00
CAPSULE BLUE BCL140/DCL140
£5.95
CAPSULE WHITE DCL180
£5.95
SPONGE SHEET 50-36 BCL140/180
£1.00
1001 122859-6
NOZZLE ASS'Y
£10.60
1001 122858-8
NOZZLE ASS'Y
£11.10
1002 451243-1
CREVICE NOZZLE 28 BLUE
£1.00
1002 451240-7
*CREVICE NOZZLE 28 WHITE
£1.90
1003 451244-9
STRAIGHT PIPE FOR DCL182 BLUE
£3.86
1003 451241-5
TELESCOPIC STRAIGHT PIPE DCL181
£4.32
1004 451245-7
SASH NOZZLE HOLDER
£1.00
1004 451242-3
SASH NOZZLE HOLDER
£1.00

Makita DCL180 Spare Parts

The Makita DCL180 is an 18V LXT cordless vacuum designed for quick clean-ups around the workshop, home, vehicle or job site. Its lightweight design, 650ml dust capacity and straightforward trigger-operated system make it a particularly handy vacuum for clearing sawdust, drilling debris and general dirt without having to reach for a larger machine.

Because the DCL180 is frequently used for cleaning fine dust and debris, the filter and suction system naturally receive plenty of wear. There are also several individual electrical and mechanical components available for the vacuum, making the Makita DCL180 parts diagram above useful when tracking down a specific fault.

DCL180 Suction and Filter Problems

If your DCL180 has lost suction or isn't picking up debris properly, start by checking the filter and pre-filter. A blocked or heavily contaminated filter can significantly restrict airflow, particularly when the vacuum has been used to collect fine workshop dust.

The DCL180 uses a 650ml collection system with separate filter, pre-filter, pipe and nozzle components, so problems with cleaning performance aren't necessarily caused by the motor itself.

DCL180 Motor Problems

A DCL180 that won't run, cuts out or has noticeably reduced suction may have a problem with the motor or its electrical supply. The parts list identifies the motor assembly, controller, switch and battery terminal separately, allowing these areas to be investigated individually.

Unlike some older Makita power tools, the DCL180's motor assembly is not typically approached as a conventional carbon-brush replacement job. If the motor has become noisy or has stopped working, the motor and controller are more relevant areas to investigate.

Switch and Battery Connection

The trigger switch and switch lever are among the components that receive repeated use every time the vacuum is operated. If the trigger feels loose, doesn't operate correctly or the vacuum is intermittent, the switch assembly and spring can be checked against the parts diagram.

A vacuum that appears completely dead is also worth checking around the battery terminal and controller. The DCL180 relies on its 18V LXT battery connection, and the terminal is available as an individual replacement component.

DCL180 Housing and Nozzle Parts

The DCL180's lightweight plastic construction makes it easy to handle, but the casing and accessories can still suffer damage through regular use. The parts breakdown includes housing sets, nozzle components, pipes, switch components and smaller fittings, so damage to one part doesn't necessarily mean replacing the complete vacuum.

If the vacuum is working correctly but the floor nozzle, sash nozzle, pipe or housing has become cracked or damaged, replacing the individual part can be a simple way of getting it back into good condition.

Find the Right DCL180 Replacement Part

The Makita DCL180 parts diagram above lets you identify the component you're looking for and match its reference number with the DCL180 parts list. This is particularly useful when dealing with the smaller springs, terminals, switches and electrical components that can be difficult to identify by appearance alone.

From DCL180 filters and nozzle parts to motors, switches, controllers, battery terminals and housing components, there are individual Makita DCL180 replacement parts available for many common repairs. If the vacuum itself is still in good condition, replacing the faulty component can be an easy way to keep this useful 18V LXT cleaner working.