Skip to main content

Makita DGA513 Parts

1 629298-6
STATOR COMPLETE
£132.75
BALL BEARING 607LLB
£1.00
ROTOR ASSY DGA456/DGA458
£29.55
GEAR HOUSING COVER ASSY DGA463
£4.45
O-RING 26 BPJ140/BPJ180/BGA45
£1.00
BALL BEARING 629LLB BPJ140/18
£2.85
SPIRAL BEVEL GEAR 10 DGA454/5
£3.35
HEX NUT M6 BUC250/GA4034/9553
£1.00
PIN CAP BPJ140/180/PC5000/01C
£1.00
COMPRESSION SPRING 8 BGA450
£1.00
TAPPING SCREW 4X30 BGA454/504
£1.00
O RING 5 DGA463/DGA467/DGA513
£4.45
SHOULDER PIN 4 DGA454/504/508
£1.00
GEAR HOUSING ASSY DGA463/513
£9.65
RUBBER PIN 4 GA7050/9050/5021
£1.00
BALL BEARING 696ZZ DGA454/504
£1.75
RING SPRING 11 BPJ140/180/GA
£1.00
*SPIRAL BEVEL GEAR 37 DGA454/5
£6.65
RETAINING RING R-32 BPJ140/81
£1.00
BALL BEARING 6201DDW BPJ140/8
£7.25
FELT RING 16 GA7050 GA9050
£1.00
O RING 45 BGS450/BPJ140/BPJ180
£1.00
BEARING BOX ASSY DGA463-DGA517
£4.85
PAN HD SCREW M4X14 9BGA450/45
£1.00
INTERNAL RETAINING RING-26/51
£1.00
SPINDLE DGA456/458/508/DGA508
£6.35
TOOLLESS WHEEL COVER 125AK A
£16.65
O RING 4 DGA463-DGA517/KP0810
£1.00
PAN HD SCREW M5X16 GA5021/955
£1.00
INNER FLANGE 42B GA4541/5041
£5.85
LOCK NUT
£4.25
DGA513 NAME PLATE
£1.00
TAPPING SCREW M4X18 EBH253/EB3
£1.00
DUST COVER R DGA454/504/508
£3.65
HOUSING SET
£11.25
RUBBER PIN 6 DUR/DHR/DTW/DG
£1.00
SWITCH KNOB DGA454/DGA504
£1.00
SWITCH LEVER DGA454/DGA504
£1.00
LEVER DGA454/DGA504/DSC250
£1.00
TORSION SPRING 2 DGA454/DGA50
£1.00
PIN 2 DGA454/DGA504/DSC250
£1.00
INDICATOR PANEL CO DGA454/504
£1.00
SWITCH 1246.3223 DJS160/DSC250
£7.25
DUST COVER L DGA454/504/508
£3.65
TERMINAL DTM52
£3.65
DGA513 SERIAL NO. LABEL
£1.00
LEAD FLANGE GA4541/41C/5041&C
£10.05
LABE/INDICATION DGA463/DGA513
£1.00

The Makita DGA513 is an 18V brushless cordless angle grinder with a 125mm disc, built for grinding and cutting work where the freedom of a battery-powered tool is useful. Heavy use can eventually lead to wear within the motor, gearbox, spindle or switch assembly, but a fault with one component does not necessarily mean the complete grinder needs replacing. The right Makita DGA513 spare parts can help restore the machine and extend its working life.

If your DGA513 is not working, has become noisy, is vibrating excessively or has developed a fault around the motor, switch or cutting head, the model-specific parts breakdown can help identify the component that needs attention.

Makita DGA513 Parts

There is a good selection of individual DGA513 parts available for repairing the grinder. The parts breakdown includes the rotor assembly, stator, ball bearings, spiral bevel gears, gear housing assembly, bearing box assembly, spindle, toolless wheel cover, inner flange and lock nut.

The motor and drive system are particularly important when investigating a grinder that has lost performance or developed unusual mechanical noise. Searches for DGA513 rotor, DGA513 stator, DGA513 bearing, DGA513 spindle and DGA513 gear relate directly to components fitted within the machine.

The gearbox contains several serviceable components, including the gear housing, spiral bevel gears and bearings. A worn bearing or damaged gear can result in increased noise, vibration or problems transferring power to the spindle, making these useful areas to check when diagnosing a mechanical fault.

DGA513 Switch & Electrical Parts

A grinder that suddenly stops, cuts out or fails to respond to its controls may have an electrical or switch-related problem. The DGA513 parts list includes the switch, switch knob, switch lever, lever, torsion spring, indicator panel, terminal and housing components.

This makes DGA513 switch, DGA513 switch lever and DGA513 terminal useful search terms when looking for replacement components. Rather than replacing the entire grinder because of a damaged control, the individual switch and associated components can be checked against the parts diagram to determine what is required.

The DGA513 is a brushless model, so it does not use conventional carbon brushes like many older corded Makita grinders. If the grinder is experiencing a motor-related fault, attention should instead be directed towards components such as the stator, rotor, terminal and electronic control system.

DGA513 Gear, Spindle & Wheel Parts

The cutting and grinding end of the DGA513 contains several replaceable components. Available Makita DGA513 replacement parts include the spindle, toolless wheel cover, inner flange, lock nut, gear housing and spiral bevel gears.

A worn or damaged spindle can affect the way the disc runs, while problems with the gear assembly may produce excessive noise or vibration. The DGA513 spindle and DGA513 gear housing are therefore useful terms for anyone carrying out a repair on the drive assembly.

The grinder also has separate right and left dust covers, housing sections and smaller mechanical components. These parts can be replaced individually where available, which is particularly useful when servicing an older machine that has suffered physical damage or general wear.

Makita DGA513 Parts Diagram

The Makita DGA513 parts diagram provides a detailed breakdown of the grinder and its individual components. Using the numbered diagram makes it easier to identify the correct part, particularly when several bearings, screws, O-rings or similar components are involved.

Checking the model number before ordering is important, especially when looking for components such as the DGA513 rotor, stator, spindle, bearing, switch or gear housing. The parts listings also show components shared with related Makita grinder models, so matching the part number against the DGA513 breakdown helps avoid ordering an unsuitable component.

From a damaged wheel cover or switch component to a worn bearing, spindle or internal motor part, individual Makita DGA513 replacement parts can provide a straightforward route to repairing the grinder. Check the diagram and part number carefully to find the component that matches your particular DGA513.