Makita DHP453 Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 1 | 125310-5 | SPEED CHANGE LEVER ASSY DDF34 | £1.00 |
|
| 1 | 231433-0 | COMPRESSION SPRING 4 | £1.00 |
|
| 14 | 188615-4 | HOUSING SET | £13.15 |
|
| 14 | 263005-3 | RUBBER PIN 6 DUR/ |
£1.00 |
|
| 14 | 187363-2 | HOUSING SET | £14.35 |
|
| 3 | 865459-6 | BHP453 NAME PLATE | £1.00 |
|
| 4 | 266130-9 | TAPPING SCREW BIND 3 X 16 L14 | £1.00 |
|
| 5 | 232182-2 | LEAF SPRING DHP480/ |
£1.00 |
|
| 6 | 419250-0 | F/ |
£1.00 |
|
| 7 | 650604-4 | SWITCH TG563FSB-4 | £27.95 |
|
| 7 | 632A23-2 | SWITCH UNIT | £27.95 |
|
| 8 | 643812-4 | TERMINAL BPB180/ |
£5.35 |
|
| 8 | 643844-1 | TERMINAL | £2.65 |
|
| 8 | 643852-2 | TERMINAL BUR181/ |
£4.05 |
|
| 9 | 251468-5 | -FLAT HD SCREW M6X22 MT64/ |
£1.00 |
|
| 10 | 196306-3 | Keyless chuck 13 mm, 1/ |
£21.82 |
|
| 10 | 766004-9 | Keyless Chuck 13mm | £14.70 |
|
| 11 | 125485-0 | GEAR ASS'Y | £31.35 |
|
| 12 | 629834-8 | DC MOTOR MT191/ |
£13.45 |
|
| 12 | 629937-8 | DC MOTOR DDF453/ |
£15.95 |
|
| 13 | 911108-4 | PAN HEAD SCREW M4X8 BDF453 | £1.00 |
|
| 15 | 424026-2 | *CUSHION BTM40/ |
£1.75 |
|
| 16 | 421940-3 | CAP DVC340/ |
£1.00 |
|
The Makita DHP453 is an 18V LXT cordless hammer driver drill designed for drilling, screwdriving and hammer drilling. With a 13mm keyless chuck, two mechanical speed settings, 16 torque positions and up to 19,500 impacts per minute, it is a versatile drill for a wide range of applications.
If your Makita DHP453 is not working, has lost power, is struggling to change speed or has developed a problem with the chuck, gearbox or switch, individual components can often be replaced. Our Makita DHP453 spare parts cover the motor, gear assembly, switch, chuck, housing and various smaller components used throughout the drill.
Makita DHP453 Parts Diagram & Parts List
The Makita DHP453 parts diagram above shows the individual components used in the cordless hammer drill and can help identify parts that are difficult to name from the outside of the machine.
The parts breakdown includes the high/low speed lever, housing, forward/reverse change lever, switch, terminal, chuck, gear assembly, DC motor and various screws, springs, covers and smaller fittings. Matching the numbered component to its part number makes it easier to identify the correct DHP453 parts for your repair.
DHP453 Motor & Gearbox Parts
The DHP453 uses a brushed 18V DC motor driving an all-metal gear construction. The parts list includes the 629937-8 DC motor and 125485-0 gear assembly, alongside the motor housing and supporting components.
If your DHP453 is losing power, running intermittently or making unusual noises, the motor and gearbox are worth investigating. A motor that runs but produces abnormal noise or fails to transfer power correctly may also indicate a problem within the gear assembly.
Replacing an individual motor or gear component can be a practical way to repair the drill when the remainder of the machine is still in good condition.
Makita DHP453 Switch & Electrical Parts
A faulty switch or battery connection can leave the DHP453 not working even when the motor and mechanical components are otherwise serviceable. The parts listing includes the switch unit, forward/reverse lever and battery terminal components.
The DHP453 uses an electronic variable-speed trigger and reversing control, so a fault in the switch assembly can affect starting, speed control or direction. If the drill cuts out during operation or only works intermittently, the switch and electrical connections should be checked.
DHP453 Chuck & Drill Components
The DHP453 is fitted with a 1.5–13mm keyless chuck, allowing drill bits and screwdriver bits to be changed without a chuck key. The parts information includes the chuck together with its retaining screw.
If the DHP453 chuck is slipping, has become damaged or is no longer gripping drill bits correctly, replacing the chuck can restore the drill without replacing the complete machine. Make sure the replacement chuck and fixing components match the DHP453 specification.
High/Low Speed & Control Parts
The DHP453 has two mechanical speed ranges, with a low-speed range of 0–400 rpm and a high-speed range reaching 1,300 rpm. A high/low speed lever and associated spring components are shown separately in the parts breakdown.
If the DHP453 speed selector is not working, check the lever, spring and surrounding housing before assuming that the complete gearbox needs replacing. Problems with the selector can sometimes be caused by a damaged external component rather than the internal gears.
DHP453 Housing & Smaller Replacement Parts
The drill's housing protects the motor, gearbox and electrical components, while smaller screws, rubber pins, springs, covers and connectors hold the different assemblies together.
The Makita DHP453 replacement parts listing includes the 187363-2 housing set, 263005-3 rubber pins, 231433-0 compression springs, 421940-3 cover and various screws and other fittings. These smaller parts can be useful when repairing a well-used drill where only one component has become damaged or lost.
Choosing the Correct DHP453 Spare Parts
When ordering Makita DHP453 spare parts, check that the part is specifically listed for the DHP453 before purchasing. The DHP453 shares some components with other Makita 18V machines, but parts should not be assumed to be interchangeable simply because the tools look similar.
Whether you need a DHP453 motor, gear assembly, switch, chuck, housing, speed-change component or smaller spare part, matching the original part number with the parts diagram is the best way to identify the correct component for your drill.
With the appropriate Makita DHP453 parts, individual worn or damaged components can be replaced and a well-used cordless hammer drill can be kept in service for longer.