Makita DHR202 Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 1 | 286263-4 | CAP 35 DHR164/ |
£1.00 |
|
| 2 | 233940-9 | RING SPRING 19 DHR164/ |
£1.00 |
|
| 3 | 417629-9 | CHUCK COVER BHR262/ |
£1.00 |
|
| 4 | 257241-1 | RING 21 DHR164/ |
£1.00 |
|
| 5 | 345187-4 | GUIDE WASHER DHR164/ |
£1.00 |
|
| 6 | 233916-6 | CONICAL COMP SPRING 21-29 DHR | £1.00 |
|
| 7 | 921923-8 | HEX BOLT M8X120 DHR164/ |
£1.00 |
|
| 8 | 345280-4 | HEX WASHER BHR262/ |
£1.00 |
|
| 9 | 417630-4 | GRIP BASE BHR262/ |
£1.95 |
|
| 10 | 158057-6 | GRIP | £3.80 |
|
| 13 | 162245-9 | CHANGE LEVER HR2470/ |
£1.00 |
|
| 14 | 233459-8 | COMPRESSION SPRING 3 DHR164 | £1.00 |
|
| 15 | 419192-8 | LOCK BUTTON BHR162/ |
£1.00 |
|
| 16 | 213278-8 | O RING 17 DHR164/ |
£1.00 |
|
| 17 | 158216-2 | GEAR HOUSING CO HR2470 | £13.75 |
|
| 18 | 266351-3 | TAPPING SCREW 4X35 BHR262/ |
£1.00 |
|
| 19 | 153290-5 | NEEDLE BEARNG CO BHR262/ |
£3.95 |
|
| 20 | 961017-7 | EXT E-RING JIS JE-3 BPJ140/ |
£1.00 |
|
| 21 | 417796-0 | GUIDE BASE BHR262/ |
£1.00 |
|
| 22 | 233344-5 | COMPRESSION SPRING 4 BHR262/ |
£1.00 |
|
| 23 | 163430-7 | LOCK PLATE COMP BHR262/ |
£2.15 |
|
| 24 | 266374-1 | TAPPING SCREW 4X25 M9001/ |
£1.00 |
|
| 25 | 233929-7 | RING SPRING BHR262/ |
£1.00 |
|
| 26 | 267460-1 | WASHER 31 BHR262/ |
£1.75 |
|
| 27 | 233401-9 | COMPRESSION SPRING BHR262/ |
£1.85 |
|
| 28 | 227109-5 | SPUR GEAR 51 HR2450T/ |
£8.65 |
|
| 29 | 216022-2 | STEEL BALL 7.0 M3601/ |
£1.00 |
|
| 30 | 158574-6 | TOOL HOLDER CO HR2470/ |
£26.75 |
|
| 31 | 267229-3 | FLAT WASHER 28 BHR262/ |
£1.00 |
|
| 32 | 331769-8 | SLEEVE 9 BHR262/ |
£2.25 |
|
| 33 | 324669-9 | IMPACT BOLT BHR262/ |
£2.45 |
|
| 34 | 324402-9 | RING 10 HR2450T/ |
£1.00 |
|
| 35 | 421955-0 | CUSHION RING 13 BHR240/ |
£1.95 |
|
| 36 | 324216-6 | O RING CASE HR2020/ |
£4.95 |
|
| 37 | 213073-6 | O RING 9 HR2020/ |
£1.00 |
|
| 38 | 233917-4 | RING SPRING 28 HR2020/ |
£1.00 |
|
| 39 | 324214-0 | STRIKER HR2020/ |
£2.45 |
|
| 40 | 213227-5 | O RING 16 HK0500/ |
£1.00 |
|
| 41 | 318132-2 | PISTON CYLINDER HR2470/ |
£9.95 |
|
| 42 | 267104-3 | FLAT WASHER 12 BTD043/ |
£1.00 |
|
| 43 | 324215-8 | PISTON JOINT HR2020/ |
£1.85 |
|
| 44 | 267104-3 | FLAT WASHER 12 BTD043/ |
£1.00 |
|
| 45 | 213727-5 | O RING 63 BHR240/ |
£3.15 |
|
| 46 | 211012-0 | BALL BEARING 606ZZ HR2410/ |
£9.65 |
|
| 47 | 961003-8 | EXT DIN 471 CIRCLIP-7 BTM50 | £1.00 |
|
| 48 | 233343-7 | COMPRESSION SPRING 7 BHR262 | £1.00 |
|
| 49 | 227179-4 | SPUR GEAR HR2470/ |
£14.85 |
|
| 50 | 324668-1 | CAM SHAFT BHR240/ |
£7.15 |
|
| 51 | 331992-5 | CLUTCH CAM BHR262/ |
£6.45 |
|
| 52 | 219014-0 | SWASH BEARING 10 BHR200S/ |
£35.85 |
|
| 53 | 226632-7 | HELICAL GEAR 25 BHR240/ |
£3.75 |
|
| 54 | 266273-7 | HEX S H BOLT M4X12 HR2020/ |
£1.00 |
|
| 55 | 345179-3 | BEARING RETAINER HR2020/ |
£1.00 |
|
| 56 | 267234-0 | FLAT WASHER 8 HR2020/ |
£1.00 |
|
| 57 | 211032-4 | BALL BEARING 608ZZCNM/ |
£6.55 |
|
| 58 | 324212-4 | RING 8 HR2020/ |
£4.55 |
|
| 59 | 961011-9 | EXT E-RING JIS E-4 EA3201 | £1.00 |
|
| 60 | 941102-2 | FLAT WASHER 5 DIN125-A/ |
£1.00 |
|
| 61 | 233342-9 | COMPRESSION SPRING 6 HR2450 | £1.00 |
|
| 62 | 345363-0 | CHANGE PLATE HR2450/ |
£1.00 |
|
| 63 | 141574-3 | INNER HOUSING CO HR2470/ |
£8.75 |
|
| 65 | 213407-3 | O RING 26 3901/ |
£1.00 |
|
| 66 | 213077-8 | OIL SEAL 10 HR2230/ |
£3.70 |
|
| 67 | 210059-1 | BALL BEARING 6000DDW 2RDCM | £3.15 |
|
| 68 | 267213-8 | THIN BLUE WASHER 10 HR2430 | £1.00 |
|
| 69 | 240092-9 | FAN 64 HR2230/ |
£1.00 |
|
| 70 | 519226-8 | ARMATURE 18V DHR202 | £24.55 |
|
| 71 | 253823-7 | THIN BLUE WASHER BHS630/ |
£1.00 |
|
| 72 | 210023-2 | BALL BEARING 627DDW | £3.05 |
|
| 73 | 267816-8 | WAVE WASHER BHR202 | £1.00 |
|
| 74 | 815F22-1 | NAME PLATE DHR202 | £1.00 |
|
| 75 | 188515-8 | HOUSING SET BHR202 | £17.15 |
|
| 76 | 638020-0 | YOKE UNIT BTW200/ |
£14.35 |
|
| 77 | 638977-5 | BRUSH HOLDER BHR202 | £8.75 |
|
| 79 | 266326-2 | TAPPING SCREW M4X18 EBH253/ |
£1.00 |
|
| 80 | 911011-9 | PAN HD SCREW M3X10 | £1.00 |
|
| 81 | 689070-8 | HEAT SINK BTW200/ |
£1.85 |
|
| 82 | 188515-8 | HOUSING SET BHR202 | £17.15 |
|
| 83 | 424128-4 | HOLDER CAP COVER DHR164/ |
£1.00 |
|
| 84 | 643829-7 | HOLDER CAP BJR182/ |
£1.00 |
|
| 85 | 194435-6 | CARBON BRUSH CB441 CB432 CB429 | £5.85 |
|
| 86 | 424111-1 | SWITCH COVER BHR202 | £1.75 |
|
| 87 | 450615-7 | F/ |
£1.00 |
|
| 88 | 638882-6 | SWITCH TG553FSB-6 BHR162/ |
£31.35 |
|
| 89 | 631792-6 | LED CIRCUIT BHR202 | £6.55 |
|
| 90 | 266326-2 | TAPPING SCREW M4X18 EBH253/ |
£1.00 |
|
| 91 | 644808-8 | TERMINAL DUR182/ |
£3.35 |
|
| 92 | 187212-3 | BATTERY HOUSING SET BHR202/ |
£8.55 |
|
| 93 | 263036-2 | RUBBER PIN 5 BTD/ |
£1.00 |
|
| 94 | 268184-2 | PIN 1.5 BTD/ |
£1.00 |
|
| 95 | 187212-3 | BATTERY HOUSING SET BHR202/ |
£8.55 |
|
| 96 | 266326-2 | TAPPING SCREW M4X18 EBH253/ |
£1.00 |
|
| 97 | 424042-4 | CUSHION RUBBER BTW450/ |
£1.85 |
|
| 98 | 424476-1 | CUSHION DHR242/ |
£1.75 |
|
| 99 | 424042-4 | CUSHION RUBBER BTW450/ |
£1.85 |
|
| 100 | 123100-0 | TOOL HOLDER ASSY HR2470/ |
£37.05 |
|
| 1001 | 324219-0 | Depth gauge | £1.00 |
|
| 1002 | 194204-5 | Battery Pack, Lithium-ion, 18V, 5.0Ah | £231.70 |
|
| 1002 | 821551-8 | STACKING CASE TYPE 3 210MM | £69.28 |
|
| 1002 | 196399-0 | Price on application | £236.96 |
|
| 1003 | 450128-8 | BATTERY COVER BDG800/ |
£1.00 |
|
| 1003 | 837634-4 | INNER TRAY | £11.74 |
|
| 1004 | ***DC18RC | 18V CHARGER | £17.79 |
|
| 1004 | 802W03-6 | LABEL/ |
£1.85 |
|
| 1005 | 821551-8 | STACKING CASE TYPE 3 210MM | £69.28 |
|
| 1005 | 141642-2 | PLASTIC CASE COMPLETE | £34.30 |
|
| 1005 | 802W05-2 | LABEL/ |
£1.85 |
|
| 1006 | 837634-4 | INNER TRAY | £11.74 |
|
| 1007 | 802W00-2 | LABEL/ |
£1.85 |
|
| 1007 | 802W02-8 | LABEL/ |
£1.85 |
|
| 1008 | 802W01-0 | LABEL/ |
£1.85 |
|
| 1008 | 802W04-4 | LABEL/ |
£1.85 |
|
Makita DHR202 Parts & Spares
The Makita DHR202 is an 18V cordless SDS-Plus rotary hammer designed for drilling into concrete, masonry, wood and metal, with three operating modes for drilling, hammer drilling and chiselling. Its compact design and relatively straightforward serviceable construction have made it a popular cordless hammer for both trade and workshop use. Makita also designed the DHR202 with externally accessible carbon brushes, making routine maintenance easier.
If your DHR202 has become noisy, lost power or stopped operating altogether, there's a good chance the problem can be narrowed down to an individual component. The Makita DHR202 parts drawing and list above show the internal assemblies and individual parts, making it easier to identify what needs replacing.
Common DHR202 Repairs
Worn carbon brushes are one of the first things worth checking when a DHR202 starts running intermittently, loses power or refuses to start. The DHR202 uses CB-441 carbon brushes, with separate brush holders and caps, and Makita specifically recommends checking and replacing the brushes when they reach their wear limit.
The switch unit and forward/reverse change lever are also separate components in the DHR202. If the trigger isn't responding properly or the direction control has become damaged, you may be able to replace the affected component rather than the complete tool.
DHR202 Motor and Internal Components
A DHR202 that is making unusual noises or suffering from reduced performance may need attention around the motor or drive mechanism. The parts breakdown includes the 18V armature, yoke unit, ball bearings, fan, inner housing and heat sink, allowing individual components to be identified during a repair.
The front end of the machine also contains a number of smaller components associated with the SDS-Plus mechanism, including O-rings, oil seals, bearings, springs, washers and retaining rings. If the hammer mechanism develops excessive wear or starts behaving differently, these components are worth considering when diagnosing the problem.
DHR202 Chuck and SDS-Plus Parts
The one-touch sliding chuck is a useful feature of the DHR202, allowing SDS-Plus accessories to be changed quickly. The model can also be fitted with a separate drill chuck attachment for conventional drilling applications.
If you're experiencing problems holding accessories securely or damage has occurred around the front of the tool, the parts breakdown can help you identify the relevant chuck, holder and front-end components.
Find Makita DHR202 Replacement Parts
The exploded Makita DHR202 parts diagram above is the best place to start when identifying a replacement. Match the numbered component on the drawing with the parts list to establish the correct Makita part number before ordering.
Whether you're looking for Makita DHR202 carbon brushes, brush holders, a switch, armature, bearings, SDS-Plus components, housing parts or another replacement component, the model-specific drawing above can help you find the correct spare.
For Makita DHR202 spare parts, DHR202 replacement parts and Makita DHR202 parts online, browse the drawing and parts list above to find the component required for your repair.