Makita DHR243 Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 1 | 194080-7 | SDS+ Plus Quick Change Chuck | £38.50 |
|
| 11 | 266745-2 | HEX.BOLT M8X90 | £1.00 |
|
| 12 | 453129-5 | GRIP BASE | £1.85 |
|
| 13 | 158057-6 | GRIP | £3.80 |
|
| 14 | 266351-3 | TAPPING SCREW 4X35 BHR262/ |
£1.00 |
|
| 15 | 141229-0 | GEAR HOUSING COMP BHR242/ |
£7.25 |
|
| 16 | 331890-3 | CUP SLEEVE HR2300/ |
£3.15 |
|
| 17 | 211294-4 | BALL BEARING 6806LLU HR2300 | £8.75 |
|
| 18 | 454112-5 | LOCK BUTTON BHR242/ |
£1.00 |
|
| 19 | 234264-6 | COMPRESSION SPRING 3 BHR242/ |
£1.00 |
|
| 20 | 453131-8 | CHANGE LEVER COVER BHR242/ |
£1.00 |
|
| 21 | 453125-3 | CHANGE LEVER BHR242/ |
£1.00 |
|
| 22 | 213381-5 | O RING 21 | £3.15 |
|
| 23 | 253308-3 | THIN WASHER 6 AN451/ |
£1.00 |
|
| 24 | 234147-0 | COMPRESSION SPRING 5 HR2300 | £1.00 |
|
| 25 | 325785-0 | PUSH CORN HR2300/ |
£1.00 |
|
| 26 | 233360-7 | COMPRESSION SPRING 4 MT240 | £1.00 |
|
| 27 | 346537-6 | LOCK PLATE BHR242/ |
£1.75 |
|
| 29 | 216019-1 | STEEL BALL 3 HR1840/ |
£1.00 |
|
| 30 | 140266-1 | TOOL HOLDER GUIDE CO HR2601/ |
£24.55 |
|
| 31 | 313149-0 | DRIVING FLANGE | £2.30 |
|
| 32 | 227232-6 | SPUR GEAR 51 HR2300/ |
£5.25 |
|
| 33 | 268226-2 | PIN 6 HK1820/ |
£4.25 |
|
| 34 | 267414-8 | FLAT WASHER 30 HR2300/ |
£1.00 |
|
| 35 | 234148-8 | COMPRESSION SPRING 31 HR2300 | £2.05 |
|
| 36 | 267153-0 | FLAT WASHER 30 HR2300/ |
£1.00 |
|
| 37 | 257932-4 | SPIRO LOCK WASHER 30 HR2300-1 | £3.85 |
|
| 38 | 267153-0 | FLAT WASHER 30 HR2300/ |
£1.00 |
|
| 39 | 325783-4 | SLEEVE 9B HR2601/ |
£1.00 |
|
| 40 | 325791-5 | IMPACT BOLT B HR2601T/ |
£2.15 |
|
| 41 | 325792-3 | WASHER 10 HR2610T/ |
£2.25 |
|
| 42 | 234149-6 | COMPRESSION SPRING 20 HR2610T | £1.00 |
|
| 43 | 325793-1 | O RING CASE B HR2601/ |
£2.45 |
|
| 44 | 213073-6 | O RING 9 HR2020/ |
£1.00 |
|
| 45 | 233979-2 | RING SPRING 28 HR23/ |
£1.00 |
|
| 46 | 326139-4 | STRIKER BHR242/ |
£3.85 |
|
| 47 | 213258-4 | O RING 17.5 HR2210/ |
£2.25 |
|
| 48 | 310345-1 | PISTON CYLINDER HR2300/ |
£7.35 |
|
| 49 | 346036-8 | GUIDE PLATE BHR261/ |
£1.00 |
|
| 50 | 324215-8 | PISTON JOINT HR2020/ |
£1.85 |
|
| 51 | 234098-7 | COMPRESSION SPRING 14 BHR261/ |
£1.00 |
|
| 52 | 267447-3 | FLAT WASHER 14 HR2300/ |
£1.00 |
|
| 53 | 211012-0 | BALL BEARING 606ZZ HR2410/ |
£9.65 |
|
| 54 | 257336-0 | EXT E-RING JIS U-6J HR2630 | £1.00 |
|
| 55 | 253186-1 | THIN WASHER 7 HR160D/ |
£1.00 |
|
| 56 | 227231-8 | SPUR GEAR 10 HR2610T/ |
£19.45 |
|
| 57 | 331814-9 | CLUTCH CAM A HR2601T/ |
£4.55 |
|
| 58 | 326140-9 | CAM SHAFT BHR242/ |
£5.35 |
|
| 59 | 219020-5 | SWASH BEARING 10 HR2300/ |
£13.68 |
|
| 60 | 227588-7 | SPIRAL BEVEL GEAR 32 BHR242/ |
£5.85 |
|
| 61 | 257323-9 | RING 8BHR242/ |
£1.00 |
|
| 62 | 922118-6 | CAP HD SCREW M4X12 4300D | £1.00 |
|
| 63 | 346038-4 | BEARING RETAINER B BHR261/ |
£1.00 |
|
| 64 | 211032-4 | BALL BEARING 608ZZCNM/ |
£6.55 |
|
| 65 | 324212-4 | RING 8 HR2020/ |
£4.55 |
|
| 66 | 922147-9 | CAP HD SCREW M4X25 | £1.00 |
|
| 67 | 141230-5 | INNER SUPPORT COMP BHR242/ |
£3.55 |
|
| 68 | 213767-3 | O RING 75 BHR242/ |
£1.75 |
|
| 69 | 318810-4 | INNER HOUSING BHR242/ |
£15.95 |
|
| 70 | 443153-6 | FELT HR2300/ |
£1.00 |
|
| 71 | 922118-6 | CAP HD SCREW M4X12 4300D | £1.00 |
|
| 72 | 346536-8 | BEARING RETAINER A BHR242/ |
£1.00 |
|
| 73 | 256536-9 | FLAT FILLISTER HD PIN 6 BHR24 | £1.00 |
|
| 74 | 346538-4 | WEIGHT HOLDER GUIDE BHR242/ |
£1.00 |
|
| 75 | 313224-2 | COUNTER WEIGHT BHR242/ |
£3.45 |
|
| 76 | 346538-4 | WEIGHT HOLDER GUIDE BHR242/ |
£1.00 |
|
| 77 | 253726-5 | HARD WASHER 6 JV2000/ |
£1.00 |
|
| 78 | 961018-5 | EXT E-RING JIS JE-5 DLS714 | £1.00 |
|
| 79 | 213008-7 | O RING 22.4 HR140D/ |
£1.00 |
|
| 80 | 141458-5 | SPIRAL BEVEL GEAR 11 COMP BHR2 | £4.75 |
|
| 81 | 210024-0 | BALL BEARING 608 2RS HR5001C | £2.85 |
|
| 82 | 253835-0 | FLAT WASHER 8 GA5020/ |
£1.00 |
|
| 83 | 619293-4 | ROTOR BHR243 | £51.15 |
|
| 84 | 210022-4 | BALL BEARING 626DDW 9911/ |
£3.05 |
|
| 85 | 629922-1 | STATOR BHR243 | £38.65 |
|
| 86 | 620241-8 | CONTROLLER BHR242/ |
£113.25 |
|
| 87 | 187687-6 | HOUSING SET DHR242 | £18.85 |
|
| 88 | 815B50-2 | DHR243 SERIAL NO. LABEL | £0.00 |
|
| 89 | 815B44-7 | DHR243 NAME PLATE | £0.00 |
|
| 90 | 266326-2 | TAPPING SCREW M4X18 EBH253/ |
£1.00 |
|
| 91 | 187687-6 | HOUSING SET DHR242 | £18.85 |
|
| 92 | 453124-5 | F/ |
£1.00 |
|
| 93 | 453123-7 | SWITCH LEVER BHR242/ |
£1.00 |
|
| 94 | 650709-0 | SWITCH C3JW-1-P BHR242/ |
£12.55 |
|
| 95 | 233598-4 | TORSION SPRING 6 BHR242/ |
£1.00 |
|
| 96 | 313226-8 | OPENER BHR242/ |
£1.00 |
|
| 97 | 644808-8 | TERMINAL DUR182/ |
£3.35 |
|
| 98 | 424476-1 | CUSHION DHR242/ |
£1.75 |
|
| 99 | 187377-1 | BATTERY HOUSING SET BHR242/ |
£6.75 |
|
| 100 | 263036-2 | RUBBER PIN 5 BTD/ |
£1.00 |
|
| 101 | 268184-2 | PIN 1.5 BTD/ |
£1.00 |
|
| 102 | 424473-7 | CUSHION RUBBER BTM40/ |
£2.25 |
|
| 103 | 424473-7 | CUSHION RUBBER BTM40/ |
£2.25 |
|
| 104 | 187377-1 | BATTERY HOUSING SET BHR242/ |
£6.75 |
|
| 105 | 286263-4 | CAP 35 DHR164/ |
£1.00 |
|
| 106 | 233940-9 | RING SPRING 19 DHR164/ |
£1.00 |
|
| 107 | 418217-5 | CHUCK COVER HR2450T/ |
£1.00 |
|
| 108 | 345333-9 | STOPPER HR2450T/ |
£1.00 |
|
| 109 | 216022-2 | STEEL BALL 7.0 M3601/ |
£1.00 |
|
| 110 | 345187-4 | GUIDE WASHER DHR164/ |
£1.00 |
|
| 111 | 233916-6 | CONICAL COMP SPRING 21-29 DHR | £1.00 |
|
| 112 | 267279-8 | FLAT WASHER 21 HR2450T/ |
£1.00 |
|
| 113 | 324355-2 | TOOL HOLDER HR2450T/ |
£39.85 |
|
| 114 | 216013-3 | STEEL BALL 6 BHR262T/ |
£1.00 |
|
| 115 | 231669-1 | TORSION SPRING HR2450T/ |
£1.00 |
|
| 116 | 345334-7 | CHANGE RING HR2450T/ |
£1.75 |
|
| 117 | 418218-3 | CHANGE COVER HR2450T/ |
£1.00 |
|
| 118 | 216018-3 | STEEL BALL 5.0 HP1641/ |
£1.00 |
|
| 119 | 345335-5 | LEAF SPRING HR2450T/ |
£1.00 |
|
| 120 | 267270-6 | FLAT WASHER 24 HR2450T/ |
£1.00 |
|
| 121 | 233924-7 | RING SPRING 21 HR2450T/ |
£1.00 |
|
| 122 | 893072-0 | LABEL/ |
£1.00 |
|
| 123 | 890994-5 | CLEAR LABEL BHR242/ |
£1.00 |
|
| 1001 | 324219-0 | Depth gauge | £1.00 |
|
| 1002 | 194079-2 | QUICK CHANGE DRILL CHUCK HR245 | £94.58 |
|
| 1003 | 821552-6 | STACKING CASE TYPE 4 315MM | £82.82 |
|
| 1003 | ***DC18RC | 18V CHARGER | £17.79 |
|
| 1004 | 194204-5 | Battery Pack, Lithium-ion, 18V, 5.0Ah | £231.70 |
|
| 1004 | 837649-1 | INNER TRAY | £11.74 |
|
| 1004 | 196399-0 | Price on application | £236.96 |
|
| 1005 | 450128-8 | BATTERY COVER BDG800/ |
£1.00 |
|
| 1005 | 802M30-3 | DHR243ZJ INDICATION LABEL | £0.00 |
|
| 1006 | 821552-6 | STACKING CASE TYPE 4 315MM | £82.82 |
|
| 1006 | 141401-4 | PLASTIC CASE COMPLETE | £44.80 |
|
| 1006 | 141402-2 | PLASTIC CASE COMPLETE | £42.70 |
|
| 1006 | 802M33-7 | DHR243ZJ PLASTIC CASE LABEL | £0.00 |
|
| 1007 | 837649-1 | INNER TRAY | £11.74 |
|
| 1007 | 837677-6 | INNER TRAY DHR242 | £10.20 |
|
| 1007 | 802M36-1 | DHR243RME PLASTIC CASE LABEL | £0.00 |
|
| 1007 | 802M42-6 | DHR243RFE PLASTIC CASE LABEL | £0.00 |
|
| 1007 | 802M46-8 | DHR243RFEV PLASTIC CASE LABEL | £0.00 |
|
| 1008 | ***DX02 | DUST EXTRACTION SYSTEM | £0.00 |
|
| 1008 | 802M29-8 | DHR243RFJ INDICATION LABEL | £0.00 |
|
| 1008 | 802M31-1 | DHR243RFJV INDICATION LABEL | £0.00 |
|
| 1008 | 802M47-6 | DHR243RMJ INDICATION LABEL | £0.00 |
|
| 1008 | 802M50-7 | DHR243RMJV INDICATION LABEL | £0.00 |
|
| 1009 | 424474-5 | SEALING CAP DX01/ |
£1.00 |
|
| 1009 | 802M32-9 | DHR243RFJ PLASTIC CASE LABEL | £0.00 |
|
| 1009 | 802M34-5 | DHR243RFJV PLASTIC CASE LABEL | £0.00 |
|
| 1009 | 802M48-4 | DHR243RMJ PLASTIC CASE LABEL | £0.00 |
|
| 1009 | 802M51-5 | DHR243RMJV PLASTIC CASE LABEL | £0.00 |
|
| 1010 | ***DX02 | DUST EXTRACTION SYSTEM | £0.00 |
|
| 1011 | 424474-5 | SEALING CAP DX01/ |
£1.00 |
|
Makita DHR243 Spare Parts
The Makita DHR243 is an 18V LXT brushless combination hammer designed for drilling, hammer drilling and chiselling, with a maximum 24mm drilling capacity. One of its useful features is the quick-change chuck system, allowing the standard SDS-Plus tool holder to be removed and replaced with a conventional drill chuck for ordinary drilling applications.
With a tool that sees regular use in concrete and masonry, wear can eventually show up in the chuck, hammer mechanism, gears or control components. The Makita DHR243 parts diagram above breaks the machine down into its individual components, making it much easier to work out which part needs attention.
DHR243 SDS-Plus Chuck Problems
The SDS-Plus tool holder is one of the most heavily used areas of the DHR243. If drill bits aren't locking properly, are difficult to remove or have developed excessive movement, the chuck assembly and its internal components should be inspected.
The tool holder assembly includes a number of smaller components such as springs, steel balls, rings, washers and guides, all of which are shown in the DHR243 parts breakdown. The complete SDS-Plus tool holder is also listed separately, while the DHR243 can accept a separate quick-change drill chuck.
Hammer Mechanism and Gearbox
If the DHR243 has lost impact power, is making unusual noises or isn't behaving correctly in hammer mode, the internal hammer mechanism is a likely area to investigate. The parts breakdown includes the gear housing, spur gears, bearings, O-rings, driving flange, pins and other components within the drive assembly.
A worn seal or bearing can cause problems long before the entire mechanism has reached the end of its useful life. Being able to identify these individual components makes it possible to concentrate the repair on the part that has actually failed.
Brushless Motor and Electrical Repairs
The DHR243 uses a brushless motor, so there are no conventional carbon brushes to replace. If the drill won't start, cuts out unexpectedly or has developed an electrical fault, the switch, controller, rotor, stator and battery connection are more relevant areas to investigate.
The model's parts breakdown includes numerous electrical and housing components separately, so an apparent motor problem doesn't automatically mean replacing the complete motor assembly.
Change Lever and Housing Components
The DHR243's three operating modes rely on the change lever and selector mechanism to switch between rotary drilling, hammer drilling and chiselling. If the mode selector has become loose, damaged or difficult to operate, the lever, cover, lock button, springs and related components can be checked individually.
The outer casing and auxiliary handle can also suffer damage after years of site use. Components such as the gear housing, grip, grip base, covers and smaller fasteners are represented in the parts list, which can be useful when restoring a well-used DHR243.
Identify the Part You Need
Start with the Makita DHR243 exploded parts diagram above and locate the component associated with the fault. Once you've found the reference number, cross-check it against the accompanying list to establish the correct Makita part number.
From DHR243 SDS-Plus chuck parts, bearings and gears to hammer mechanism components, switches, change levers, housings and electrical parts, the individual spares provide plenty of options for repairing this popular cordless combination hammer.
A worn component doesn't necessarily mean the end of the machine. With the right Makita DHR243 replacement parts, an otherwise sound tool can often be returned to reliable working condition without replacing the complete hammer.