Makita DHR263 Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 1 | 286263-4 | CAP 35 DHR164/ |
£1.00 |
|
| 2 | 233940-9 | RING SPRING 19 DHR164/ |
£1.00 |
|
| 3 | 417629-9 | CHUCK COVER BHR262/ |
£1.00 |
|
| 4 | 257241-1 | RING 21 DHR164/ |
£1.00 |
|
| 5 | 345187-4 | GUIDE WASHER DHR164/ |
£1.00 |
|
| 6 | 233916-6 | CONICAL COMP SPRING 21-29 DHR | £1.00 |
|
| 7 | 921923-8 | HEX BOLT M8X120 DHR164/ |
£1.00 |
|
| 8 | 345280-4 | HEX WASHER BHR262/ |
£1.00 |
|
| 9 | 417630-4 | GRIP BASE BHR262/ |
£1.95 |
|
| 10 | 158057-6 | GRIP | £3.80 |
|
| 13 | 450980-4 | CHANGE LEVER BHR261/ |
£3.85 |
|
| 14 | 233279-0 | COMPRESSION SPRING 4 BHR262 | £1.00 |
|
| 15 | 453706-3 | LOCK BUTTON BHR262/ |
£1.00 |
|
| 16 | 213278-8 | O RING 17 DHR164/ |
£1.00 |
|
| 17 | 158945-7 | GEAR HOUSING COMP BHR262/ |
£10.65 |
|
| 18 | 266560-4 | TAPPING SCREW 4X40 CC300D | £1.00 |
|
| 19 | 153290-5 | NEEDLE BEARNG CO BHR262/ |
£3.95 |
|
| 20 | 961017-7 | EXT E-RING JIS JE-3 BPJ140/ |
£1.00 |
|
| 21 | 417796-0 | GUIDE BASE BHR262/ |
£1.00 |
|
| 22 | 233344-5 | COMPRESSION SPRING 4 BHR262/ |
£1.00 |
|
| 23 | 163430-7 | LOCK PLATE COMP BHR262/ |
£2.15 |
|
| 24 | 266374-1 | TAPPING SCREW 4X25 M9001/ |
£1.00 |
|
| 25 | 233929-7 | RING SPRING BHR262/ |
£1.00 |
|
| 26 | 267460-1 | WASHER 31 BHR262/ |
£1.75 |
|
| 27 | 233401-9 | COMPRESSION SPRING BHR262/ |
£1.85 |
|
| 28 | 227109-5 | SPUR GEAR 51 HR2450T/ |
£8.65 |
|
| 29 | 216022-2 | STEEL BALL 7.0 M3601/ |
£1.00 |
|
| 30 | 158574-6 | TOOL HOLDER CO HR2470/ |
£26.75 |
|
| 31 | 267229-3 | FLAT WASHER 28 BHR262/ |
£1.00 |
|
| 32 | 331769-8 | SLEEVE 9 BHR262/ |
£2.25 |
|
| 33 | 324669-9 | IMPACT BOLT BHR262/ |
£2.45 |
|
| 34 | 324402-9 | RING 10 HR2450T/ |
£1.00 |
|
| 35 | 421955-0 | CUSHION RING 13 BHR240/ |
£1.95 |
|
| 36 | 324216-6 | O RING CASE HR2020/ |
£4.95 |
|
| 37 | 213073-6 | O RING 9 HR2020/ |
£1.00 |
|
| 38 | 233917-4 | RING SPRING 28 HR2020/ |
£1.00 |
|
| 39 | 326404-1 | STRIKER DHR263/ |
£3.15 |
|
| 40 | 213227-5 | O RING 16 HK0500/ |
£1.00 |
|
| 41 | 318132-2 | PISTON CYLINDER HR2470/ |
£9.95 |
|
| 42 | 346036-8 | GUIDE PLATE BHR261/ |
£1.00 |
|
| 43 | 324215-8 | PISTON JOINT HR2020/ |
£1.85 |
|
| 44 | 234098-7 | COMPRESSION SPRING 14 BHR261/ |
£1.00 |
|
| 45 | 211012-0 | BALL BEARING 606ZZ HR2410/ |
£9.65 |
|
| 46 | 961003-8 | EXT DIN 471 CIRCLIP-7 BTM50 | £1.00 |
|
| 47 | 233343-7 | COMPRESSION SPRING 7 BHR262 | £1.00 |
|
| 48 | 227179-4 | SPUR GEAR HR2470/ |
£14.85 |
|
| 49 | 325976-3 | CAM SHAFT BHR261/ |
£7.35 |
|
| 50 | 331992-5 | CLUTCH CAM BHR262/ |
£6.45 |
|
| 51 | 219014-0 | SWASH BEARING 10 BHR200S/ |
£35.85 |
|
| 52 | 325640-6 | SLEEVE 9 BHR261/ |
£1.00 |
|
| 53 | 227549-7 | SPIRAL BEVEL GEAR 26 BHR261/ |
£6.15 |
|
| 55 | 346038-4 | BEARING RETAINER B BHR261/ |
£1.00 |
|
| 56 | 211032-4 | BALL BEARING 608ZZCNM/ |
£6.55 |
|
| 57 | 324212-4 | RING 8 HR2020/ |
£4.55 |
|
| 58 | 961011-9 | EXT E-RING JIS E-4 EA3201 | £1.00 |
|
| 59 | 941102-2 | FLAT WASHER 5 DIN125-A/ |
£1.00 |
|
| 60 | 233342-9 | COMPRESSION SPRING 6 HR2450 | £1.00 |
|
| 61 | 345220-2 | CHANGE PLATE BHR261/ |
£1.00 |
|
| 62 | 922148-7 | HEX SOCKET HD BOLT M4X25 HR52 | £1.00 |
|
| 63 | 158944-9 | INNER SUPPORT COMP BHR261/ |
£6.45 |
|
| 64 | 213728-3 | O RING 68 HR2630T/ |
£1.00 |
|
| 65 | 318392-6 | INNER HOUSING BHR261/ |
£17.15 |
|
| 66 | 443143-9 | FILTER BHR261/ |
£1.00 |
|
| 67 | 424185-2 | CAP BHR261/ |
£1.00 |
|
| 68 | 234097-9 | COMPRESSION SPRING 10 BHR261/ |
£1.00 |
|
| 69 | 266273-7 | HEX S H BOLT M4X12 HR2020/ |
£1.00 |
|
| 69 | 266273-7 | HEX S H BOLT M4X12 HR2020/ |
£1.00 |
|
| 70 | 213231-4 | OIL SEAL 15 BHR262/ |
£5.65 |
|
| 71 | 213437-4 | O RING 28 AG125/ |
£1.00 |
|
| 72 | 632828-4 | YOKE UNIT 5621RD/ |
£18.25 |
|
| 73 | 961082-6 | RETAINING RING WR12 BHR261/ |
£1.85 |
|
| 74 | 331596-3 | SLEEVE 12 HR4500C/ |
£4.25 |
|
| 75 | 211131-2 | BALL BEARING 6001DDW HS7100 | £5.75 |
|
| 76 | 961016-9 | EXT E-RING JIS JE-10 BHR262 | £1.00 |
|
| 77 | 346037-6 | BEARING RETAINER A BHR261/ |
£1.95 |
|
| 78 | 519235-7 | ARMATURE ASSY 36V BHR261/ |
£27.95 |
|
| 79 | 240037-7 | FAN 44 BHR261/ |
£3.75 |
|
| 80 | 210022-4 | BALL BEARING 626DDW 9911/ |
£3.05 |
|
| 81 | 620281-6 | LIGHT CIRCUIT DHR263/ |
£5.75 |
|
| 82 | 644507-2 | BRUSH HOLDER DHR263/ |
£4.55 |
|
| 83 | 643829-7 | HOLDER CAP BJR182/ |
£1.00 |
|
| 84 | 194928-3 | CARBON BRUSH CB-442 BUH550RD/ |
£5.05 |
|
| 85 | 266326-2 | TAPPING SCREW M4X18 EBH253/ |
£1.00 |
|
| 86 | 644508-0 | BRUSH HOLDER DHR263/ |
£4.55 |
|
| 87 | 644808-8 | TERMINAL DUR182/ |
£3.35 |
|
| 88 | 620280-8 | CONTROLLER DHR263/ |
£67.65 |
|
| 92 | 650721-0 | SWITCH DHR263/ |
£22.85 |
|
| 93 | 454980-6 | F/ |
£1.00 |
|
| 94 | 256261-2 | PIN 6 BHR262 | £1.00 |
|
| 95 | 187771-7 | HANDLE SET DHR263/ |
£8.75 |
|
| 95 | 187771-7 | HANDLE SET DHR263/ |
£8.75 |
|
| 96 | 266326-2 | TAPPING SCREW M4X18 EBH253/ |
£1.00 |
|
| 96 | 266326-2 | TAPPING SCREW M4X18 EBH253/ |
£1.00 |
|
| 97 | 815K28-9 | LABEL/ |
£1.00 |
|
| 99 | 187833-1 | HOUSING SET DHR263/ |
£25.65 |
|
| 99 | 187833-1 | HOUSING SET DHR263/ |
£25.65 |
|
| 100 | 815K11-6 | NAME PLATE DHR263 | £1.00 |
|
| 102 | 803F14-2 | CLEAR LABEL DHR263/ |
£1.00 |
|
| 103 | 893072-0 | LABEL/ |
£1.00 |
|
| 108 | 688165-4 | LINE FILTER UK360/ |
£1.00 |
|
| 109 | 688172-7 | Line Filter | £1.00 |
|
| 1001 | 194683-7 | Grease vessel set, 100 ml | £7.60 |
|
| 1002 | 324219-0 | Depth gauge | £1.00 |
|
| 1003 | 443122-7 | CLOTH BHR262/ |
£3.05 |
|
| 1004 | 142729-3 | CONNECTOR P.CASE(TYPE4) COMP. | £43.80 |
|
| 1005 | 803G79-0 | LABEL/ |
£1.00 |
|
| 1006 | 803G80-5 | LABEL/ |
£1.00 |
|
| 1007 | 837988-9 | INNER TRAY DHR263/ |
£11.74 |
|
The Makita DHR263 is an 18V x2 cordless combination hammer designed for drilling, hammer drilling and chiselling. Using two 18V LXT batteries, it delivers the performance of a larger rotary hammer while retaining a cordless design. The DHR263 contains a substantial mechanical and electrical assembly, including an SDS-Plus tool holder, impact mechanism, gears, armature, carbon brushes and electronic controller.
If your Makita DHR263 is not working, has lost hammer action, is struggling to drill or has developed a problem with the chuck, motor or controls, identifying the correct Makita DHR263 spare parts can help isolate the component that needs replacing.
Makita DHR263 Parts Diagram and Parts List
The DHR263 parts diagram covers the complete hammer mechanism from the front tool holder through to the motor and battery connections. The parts list includes the tool holder, impact bolt, striker, piston cylinder, cam shaft, clutch cam, bearings, armature, fan, brush holders, controller, switch and housing.
There are also numerous smaller O-rings, springs, washers, retaining rings and seals. These individual components can be important when servicing the impact mechanism rather than replacing larger assemblies unnecessarily.
DHR263 SDS-Plus Chuck and Tool Holder Parts
The front of the DHR263 uses an SDS-Plus tool holder to retain drills and chisels. The parts breakdown identifies the 158574-6 tool holder complete, together with the 267229-3 flat washer, 331769-8 sleeve 9, 324669-9 impact bolt, 421955-0 cushion ring and associated springs and retaining components.
If the DHR263 chuck is loose, a drill bit is not being held correctly or the tool holder is difficult to operate, these components should be inspected. Wear in the retaining mechanism can affect how securely an SDS-Plus accessory is held during drilling or chiselling.
DHR263 Impact Mechanism and Piston Parts
The hammer mechanism contains the components responsible for generating the impact force. The parts list includes the 326404-1 striker, 318132-2 piston cylinder, 324215-8 piston joint, 325976-3 cam shaft and 331992-5 clutch cam, alongside O-rings, springs and bearings.
If your DHR263 has lost impact power, is drilling without hammer action or has developed unusual noise from the front of the machine, the impact mechanism is an important area to investigate. Damaged seals and worn internal components can also affect the operation of the hammer assembly.
The DHR263 also includes an inner housing, filter and sealing components, which form part of the internal mechanical assembly.
DHR263 Gears, Bearings and Drive Parts
The motor drives the hammer mechanism through a series of gears, bearings and supporting components. The parts breakdown includes the 227109-5 spur gear 51, 227179-4 spur gear 10, 227549-7 spiral bevel gear 26, 219014-0 swash bearing 10 and several ball bearings and bearing retainers.
If the Makita DHR263 is making a grinding noise, has excessive vibration or the motor is running without transferring power correctly, the gears and bearings should be checked.
Replacing an individual bearing, retaining ring, sleeve or gear can be appropriate where the fault has been isolated to a particular part of the drive assembly.
Makita DHR263 Armature, Brushes and Motor Parts
Unlike Makita's newer brushless rotary hammers, the DHR263 uses a brushed motor. The parts catalogue identifies the 519235-7 36V armature assembly, 240037-7 fan 44, 210022-4 ball bearing and separate brush-holder components.
The DHR263 uses CB-442 carbon brushes, with 195023-2 carbon brush set identified in the official parts documentation. The brush holders are listed separately as 644507-2 and 644508-0.
If the DHR263 is losing power, cutting out, sparking excessively or refusing to run, the carbon brushes, armature, bearings and electrical connections should be checked.
DHR263 Controller, Switch and Battery Connections
The DHR263's electrical system includes an electronic controller as well as the conventional motor and brush components. The parts list identifies the 620280-8 controller, 650721-0 switch, 620281-6 light circuit and 644808-8 terminals.
If the DHR263 will not start, runs intermittently or the LED illumination is not operating correctly, the switch, controller, terminals and associated wiring should be investigated alongside the batteries.
Because the DHR263 uses two 18V batteries, both battery connections should also be checked if the tool appears completely dead.
DHR263 Housing, Handle and Small Parts
The outer housing and handle protect the internal mechanism while providing the mounting points for the controls and battery connections. The parts information includes the 187833-1 housing set and 187771-7 handle set, together with rubber pins, plates, screws and other small fittings.
The auxiliary handle is particularly important when using the DHR263 for heavy drilling and chiselling. Damaged mounting or grip components should be replaced rather than continuing to use a tool with a compromised handle.
Identifying the Correct Makita DHR263 Parts
When searching for Makita DHR263 parts online, use the model number together with the exact part number wherever possible. The DHR263 parts information covers several related versions, including DHR263Z and DHR263 variants supplied with different battery and accessory configurations.
From DHR263 SDS-Plus tool holder parts and impact components to pistons, strikers, gears, bearings, carbon brushes, armatures, controllers, switches, handles and housing components, the detailed parts list makes it easier to identify the individual Makita DHR263 replacement parts required for a repair.
Checking the original part number against your particular DHR263 before ordering is especially important for internal mechanical and electrical components.