Makita DLS714 Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 156 | 140610-2 | ARM HOLDER COMPLETE | £71.05 |
|
| 156 | 816392-5 | BEVEL SCALE LABEL | £1.00 |
|
| 157 | 256123-4 | PIN 5 BLS710/ |
£1.00 |
|
| 158 | 266320-4 | SCREW M10 | £3.55 |
|
| 160 | 216413-7 | THRUST NEEDLE GAUGE 1023/ |
£2.25 |
|
| 162 | 252130-5 | HEX. LOCK NUT M10-17 | £1.85 |
|
| 165 | 252105-4 | NYLON INSERT NUT M8-13 | £1.00 |
|
| 188 | 253731-2 | HARD WASHER 8 LS800D/ |
£1.00 |
|
| 167 | 416355-7 | INDICATION PLATE | £1.95 |
|
| 172 | 419103-3 | KERF BOARD | £2.05 |
|
| 173 | 140614-4 | TURN BASE COMPLETE | £117.45 |
|
| 173 | 810495-7 | CAUTION LABEL | £1.00 |
|
| 173 | 817283-3 | CAUTION LABEL | £1.00 |
|
| 174 | 922111-0 | HEX SOCKET HEAD BOLT M4X10 90 | £1.00 |
|
| 175 | 153580-6 | SQUARE ROD COMPLETE | £8.65 |
|
| 176 | 925251-3 | HEX.BOLT M5X30 | £1.00 |
|
| 178 | 344601-7 | LOCK PLATE | £1.00 |
|
| 179 | 317616-7 | PIN HOLDER | £6.35 |
|
| 180 | 256158-5 | PIN 3 BCV01/ |
£1.00 |
|
| 181 | 324288-1 | LOCK PIN | £3.05 |
|
| 183 | 324289-9 | ROD 6 | £1.00 |
|
| 184 | 416450-3 | LOCK LEVER | £2.25 |
|
| 185 | 345272-3 | LOCK LEVER PLATE LS0714/ |
£1.00 |
|
| 187 | 231418-6 | COMPRESSION SPRING 9 | £1.00 |
|
| 189 | 266432-3 | ADJUST BOLT M8X27 | £2.15 |
|
| 190 | 273658-0 | GRIP 32 | £9.75 |
|
| 191 | 286212-1 | CAP 20 LS1030/ |
£1.00 |
|
| 192 | 921472-5 | HEX. BOLT M8X50 | £1.00 |
|
| 194 | 140612-8 | BASE COMPLETE | £83.40 |
|
| 194 | 816339-9 | MITER SCALE PLATE | £3.75 |
|
| 194 | 810486-8 | LABEL/ |
£1.00 |
|
| 196 | 344646-5 | SLIDE PLATE | £2.35 |
|
| 197 | 240033-5 | FAN 57 9564/ |
£3.75 |
|
| 198 | 142811-8 | SUB FENCE COMPLETE | £16.15 |
|
| 198 | 805R08-5 | CAUTION LABEL | £2.85 |
|
| 199 | 252014-7 | NYLON INSERT NUT M6-10 LS1013 | £1.00 |
|
| 200 | 266061-2 | TAPPING SCREW BIND CT 4X8 | £1.00 |
|
| 201 | 345359-1 | SUB FENCE PLATE | £1.00 |
|
| 203 | 912357-6 | COUNTERSUNK SCREW M6X35 | £1.00 |
|
| 21 | 183B55-3 | HANDLE SET | £64.45 |
|
| 20 | 911268-2 | PAN HD SCREW M 5X45 W/ |
£1.00 |
|
| 19 | 265995-6 | TAPPING SCREW 4X18 | £1.00 |
|
| 5 | 231397-8 | COMPRESSION SPRING 4 2414B/ |
£1.00 |
|
| 6 | 456024-8 | LOCK OFF BUTTON | £2.05 |
|
| 8 | 644808-8 | TERMINAL DUR182/ |
£3.35 |
|
| 9 | 650756-1 | SWITCH | £24.15 |
|
| 12 | 143268-6 | HANDLE COVER COMPLETE | £4.65 |
|
| 175 | 263005-3 | RUBBER PIN 6 DUR/ |
£1.00 |
|
| 13 | 851E60-3 | DLS714 NAME PLATE | £1.00 |
|
| 18 | 456022-2 | MOTOR HOUSING | £6.95 |
|
| 48 | 210017-7 | BALL BEARING 607DDW BO5041/ |
£3.95 |
|
| 23 | 629157-4 | STATOR | £37.55 |
|
| 24 | 456023-0 | BAFFLE PLATE | £2.85 |
|
| 25 | 519373-5 | ROTOR ASS'Y | £102.05 |
|
| 26 | 344681-3 | SHAFT LOCK | £2.45 |
|
| 27 | 233092-6 | COMPRESSION SPRING 5 LS800DWB | £1.00 |
|
| 28 | 211092-6 | BALL BEARING VC3211M/ |
£6.25 |
|
| 29 | 143291-1 | CONTROLLER COMPLETE | £138.65 |
|
| 30 | 922331-6 | CAP HD SCREW M6X20 HM1800/ |
£1.00 |
|
| 202 | 253804-1 | BLUE WASHER 6 CS DST112/ |
£1.00 |
|
| 34 | 257163-5 | RING 6 LS1013/ |
£2.15 |
|
| 33 | 154643-1 | LINK PLATE COMPLETE | £10.65 |
|
| 35 | 346330-8 | LINK COVER | £1.00 |
|
| 36 | 961018-5 | EXT E-RING JIS JE-5 DLS714 | £1.00 |
|
| 37 | 421626-9 | GUARD | £1.00 |
|
| 38 | 165414-1 | GUARD PLATE COMPLETE | £2.25 |
|
| 129 | 911113-1 | PAN HEAD SCREW M4X10 | £1.00 |
|
| 40 | 213460-9 | O RING 35 HM1303B/ |
£2.15 |
|
| 41 | 419277-0 | DUST NOZZLE | £2.25 |
|
| 138 | 266757-5 | HEX. SOCKET HEAD BOLT M6X16 | £1.00 |
|
| 43 | 262001-8 | URETHANE RING 5 TW0250/ |
£1.95 |
|
| 44 | 265717-4 | SCREW M6X43 | £2.35 |
|
| 170 | 266026-4 | CT SCREW M4X12 UC3530A/ |
£1.00 |
|
| 46 | 143350-1 | BLADE CASE COMPLETE | £150.45 |
|
| 46 | 263002-9 | RUBBER PIN 4 GA7050/ |
£1.00 |
|
| 49 | 961052-5 | EXT DIN 471 CIRCLIP-12 EM2651 | £1.00 |
|
| 51 | 227810-2 | HELICAL GEAR 53 | £4.75 |
|
| 52 | 257088-3 | RING 12 | £1.00 |
|
| 53 | 213623-7 | O RING 46 LF1000/ |
£1.00 |
|
| 54 | 317193-9 | BEARING BOX | £6.25 |
|
| 55 | 211129-9 | BALL BEARING 6201DDW BPJ140/ |
£7.25 |
|
| 56 | 323798-5 | SPINDLE | £9.95 |
|
| 57 | 285736-4 | BEARING RETAINER 58 | £2.05 |
|
| 58 | 224370-5 | INNER FLANGE 40 MT582/ |
£4.25 |
|
| 59 | 911223-4 | PAN HD SCREW 5X16 W/ |
£1.00 |
|
| 60 | 224275-9 | OUTER FLANGE 40 MT582/ |
£7.85 |
|
| 61 | 266733-9 | HEX. S.F.H. BOLT M6X16 | £1.00 |
|
| 62 | 345585-2 | CENTER PLATE | £3.05 |
|
| 63 | 346232-8 | CENTER COVER | £7.15 |
|
| 64 | 265985-9 | PIVOT SCREW M6 DLS/ |
£2.85 |
|
| 65 | 266732-1 | HEX. SOCKET HEAD BOLT M6X16 | £1.00 |
|
| 66 | 345589-4 | CENTER WASHER | £1.00 |
|
| 67 | 231934-8 | SPIRAL SPRING 24 LS800DWB/ |
£3.05 |
|
| 68 | 453298-2 | SAFETY COVER | £24.55 |
|
| 69 | 267136-0 | LARGE WASHER 5 LS800D/ |
£1.00 |
|
| 70 | 265491-4 | HEX SOCKET HD BOLT M5X16 DA40 | £1.00 |
|
| 80 | 324455-8 | LOCK PIN | £2.55 |
|
| 81 | 452134-9 | ROD HOLDER | £4.55 |
|
| 186 | 266034-5 | CT SCREW M4X16 HS6100/ |
£1.00 |
|
| 83 | 231316-4 | COMPRESSION SPRING 7/ |
£1.00 |
|
| 84 | 325980-2 | ROD 8 | £2.15 |
|
| 85 | 421589-9 | CAP | £1.00 |
|
| 86 | 346320-1 | LOCK LEVER | £3.35 |
|
| 88 | 346322-7 | LOCK PLATE | £1.95 |
|
| 90 | 911114-9 | PAN HD SCREW M4X10/ |
£1.00 |
|
| 91 | 231690-0 | TORSION SPRING 8 | £1.00 |
|
| 92 | 346550-4 | GUARD | £1.85 |
|
| 94 | 346321-9 | SUB LEVER | £1.85 |
|
| 95 | 253215-0 | THIN WASHER 8 HR5212C/ |
£1.00 |
|
| 182 | 231325-3 | COMPRESSION SPRING 6 LS0714/ |
£1.00 |
|
| 114 | 319193-5 | GUIDE FENCE | £31.35 |
|
| 115 | 922344-7 | H.S.H.BOLT M6X25 WITH WG | £1.00 |
|
| 193 | 251887-5 | SCREW M6X10 LS800D/ |
£2.25 |
|
| 119 | 416535-5 | SLEEVE 17 | £1.00 |
|
| 118 | 233520-1 | TORSION SPRING 28 | £4.55 |
|
| 164 | 265790-4 | THUMB SCREW M6X28 | £1.00 |
|
| 163 | 257214-4 | RING 26 | £6.65 |
|
| 123 | 318651-8 | PIPE HOLDER | £8.25 |
|
| 124 | 266208-8 | HSS BOLT M6X8 BHS630/ |
£1.00 |
|
| 127 | 687045-1 | STRAIN RELIEF | £1.00 |
|
| 130 | 416006-2 | LEVER 100 | £4.45 |
|
| 131 | 913106-4 | CUP POINT GRUB-SCREW M4X8/ |
£1.00 |
|
| 132 | 252144-4 | HEX. NUT M10-17 | £3.75 |
|
| 133 | 231266-3 | COMPRESSION SPRING 5 | £1.00 |
|
| 161 | 253024-7 | FLAT WASHER 10 LS1013/ |
£1.00 |
|
| 135 | 286236-7 | CAP 16 | £1.00 |
|
| 136 | 140609-7 | ARM COMPLETE | £93.70 |
|
| 173 | 211376-2 | LINEAR BALL BEARING 2560 | £21.15 |
|
| 173 | 262077-5 | FELT RING 25 | £2.15 |
|
| 173 | 344638-4 | CAP 35 | £1.00 |
|
| 137 | 324295-4 | RELEASE PIN | £2.25 |
|
| 139 | 345299-3 | STOPPER PLATE | £1.75 |
|
| 140 | 253726-5 | HARD WASHER 6 JV2000/ |
£1.00 |
|
| 141 | 231663-3 | TORSION SPRING 8 | £1.00 |
|
| 142 | 265113-6 | +PAN HEAD SCREW #REF! | £1.00 |
|
| 143 | 343678-9 | POINTER | £1.00 |
|
| 145 | 140608-9 | FRONT ARM COMPLETE | £75.55 |
|
| 146 | 344643-1 | STOPPER ARM | £1.95 |
|
| 147 | 253948-7 | WAVE WASHER 8 UM140DST/ |
£1.00 |
|
| 148 | 253835-0 | FLAT WASHER 8 GA5020/ |
£1.00 |
|
| 149 | 251267-5 | PAN HD SHOULDER SCREW M6 2400 | £1.00 |
|
| 151 | 251961-9 | SOCKET FLAT GRUB SCREW M6X10 | £1.00 |
|
| 152 | 271601-3 | KNOB 20 LS1030/ |
£1.00 |
|
| 153 | 213021-5 | O RING 5 BTM40/ |
£1.00 |
|
| 154 | 324183-5 | STOPPER PIN | £3.15 |
|
| 155 | 331350-5 | PIN 16-90 | £4.85 |
|
Makita DLS714 Spare Parts
The Makita DLS714 is a compact 18V LXT 190mm cordless sliding compound mitre saw, designed for jobs where portability matters without giving up the flexibility of a sliding saw. Its dual battery setup provides the power required for demanding cuts, while the compact sliding mechanism makes it particularly useful on site or in workshops where space is limited.
With a cordless mitre saw being exposed to plenty of dust, vibration and repeated movement, certain components can naturally require replacement over time. The Makita DLS714 parts diagram above provides a detailed breakdown of the saw, making it easier to track down the component responsible for a fault.
DLS714 Common Repairs
If the saw won't start, cuts out or is running inconsistently, the electrical system is a sensible place to begin. The DLS714 contains a number of replaceable components around the controls and power supply, including the switch, switch lever, battery terminals and controller.
Unlike older mains-powered Makita mitre saws, the DLS714 uses a brushless motor, so carbon brushes aren't something you'll find on this model. A motor-related fault is instead more likely to involve the electronic controller, motor assembly or associated electrical components.
Sliding Mechanism and Blade Drive
The sliding mechanism is one of the defining features of the DLS714, allowing the relatively compact saw to handle wider material. If the head develops excessive movement or the slide becomes stiff or rough, components such as the slide poles, bearings, bearing holders and associated fittings are worth inspecting.
Problems around the blade can have several possible causes. The parts breakdown includes the spindle, gears, bearings, blade flange and shaft-lock components, giving you the option of investigating the drive assembly rather than immediately replacing the complete saw.
DLS714 Guard and Adjustment Parts
The blade guard and its associated mechanism are important both for safe operation and for protecting the cutting assembly. Damage to the guard, springs or smaller fittings can occur through regular site use or accidental knocks, and individual components may be replaceable.
The mitre and bevel adjustment systems also contain several smaller parts, including locking levers, stoppers, springs and adjustment components. If the saw isn't holding its angle correctly or an adjustment mechanism has become damaged, the parts diagram can help pinpoint what needs attention.
Keep Your DLS714 Cutting Accurately
A cordless mitre saw that has developed a fault doesn't necessarily need to be replaced. The Makita DLS714 exploded parts diagram above lets you work through the machine component by component, helping you identify the correct spare before starting a repair.
Check the numbered item against the accompanying parts list to establish the relevant Makita part number. From DLS714 bearings, gears and spindle components to switches, controllers, slide parts and blade guard components, there are numerous individual parts that can help restore a well-used saw and extend its working life.