Makita DRT50 Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 1 | 853N00-1 | DRT50 NAME PLATE | £1.00 |
|
| 2 | 643874-2 | TERMINAL DTM52 | £3.65 |
|
| 17 | 266326-2 | TAPPING SCREW M4X18 EBH253/ |
£1.00 |
|
| 4 | 853N19-0 | DRT50 SERIAL NO. LABEL | £1.00 |
|
| 9 | 183G76-5 | HOUSING SET | £5.85 |
|
| 9 | 263005-3 | RUBBER PIN 6 DUR/ |
£1.00 |
|
| 6 | 620720-6 | CONTROLLER A | £84.90 |
|
| 7 | 632K92-3 | SWITCH UNIT DRT50 | £6.25 |
|
| 8 | 144662-5 | SWITCH PLATE COMP DRT50 | £1.85 |
|
| 10 | 629280-5 | STATOR | £32.95 |
|
| 11 | 210017-7 | BALL BEARING 607DDW BO5041/ |
£3.95 |
|
| 12 | 253186-1 | THIN WASHER 7 HR160D/ |
£1.00 |
|
| 13 | 519449-8 | ROTOR ASSY | £29.65 |
|
| 14 | 620721-4 | LED CIRCUIT DRT50 | £8.05 |
|
| 15 | 210301-0 | BALL BEARING 6003DDW RT0700C | £8.85 |
|
| 16 | 253906-3 | WAVE WASHER 26 RT0700C/ |
£1.00 |
|
| 18 | 144661-7 | OUTER HOUSING COMPLETE | £17.55 |
|
| 19 | 452468-0 | PUSH BUTTON RT0700C/ |
£1.00 |
|
| 20 | 233127-3 | COMPRESSION SPRING 7 9526PB | £1.00 |
|
| 21 | 256437-1 | PIN 4 9520NB/ |
£1.00 |
|
| 22 | 763637-1 | COLLET CONE 1/ |
£10.16 |
|
| 23 | 763615-1 | COLLET NUT RP0900/ |
£3.86 |
|
| 24 | 265792-0 | THUMB SCREW M5X35 RT0700C | £2.15 |
|
| 29 | 941151-9 | FLAT WASHER 6 DIN125-B BHS630 | £1.00 |
|
| 26 | 265763-7 | KNUR THUMB SETSCREW M6X25 370 | £1.00 |
|
| 27 | 942151-2 | *SPRING WASHER 6 | £1.00 |
|
| 28 | 142403-3 | TRIMMER BASE COMP RT0700C | £21.75 |
|
| 30 | 227262-7 | SPUR GEAR 16 DRT50/ |
£1.00 |
|
| 31 | 941101-4 | FLAT WASHER 5 DIN125-B RP0900 | £1.00 |
|
| 32 | 252103-8 | HEX LOCK NUT M5-8 BO3710/ |
£1.00 |
|
| 33 | 454842-8 | BASE PROTECTOR RT0700C/ |
£3.05 |
|
| 34 | 912112-6 | COUNTERSUNK SCREW M4X10 RP090 | £1.00 |
|
| 35 | 346392-6 | CAM PLATE RT0700C/ |
£1.00 |
|
| 36 | 163524-8 | LOCK LEVER COMP RT0700C/ |
£3.25 |
|
| 37 | 424396-9 | RUBBER CAP | £1.00 |
|
| 38 | 196612-6 | TRIMMER BASE SET | £28.70 |
|
The Makita DRT50 is an 18V LXT cordless router trimmer designed for detailed woodworking, edge trimming, groove cutting and decorative routing. Its brushless motor provides variable speeds from 10,000 to 30,000 rpm, while interchangeable base assemblies allow the tool to be configured for different routing applications. The DRT50 accepts 6mm and 8mm collets, with other versions and accessories available for different markets.
If your Makita DRT50 is not working, has lost power, is running erratically or has developed a problem with the base, collet, switch or motor, individual DRT50 spare parts can be identified from the parts diagram and list.
Makita DRT50 Parts Diagram and Parts List
The DRT50 parts diagram above shows the cordless trimmer broken down into its housing, electronic controls, brushless motor, bearings, drive mechanism and trimmer base. Makita provides parts information for several DRT50 variants, including DRT50Z, DRT50ZJ and DRT50ZJX versions.
The parts list contains both internal components and removable routing equipment. This includes the controller, switch unit, stator, rotor, LED circuit, bearings, collets, collet nuts, base assemblies, lock lever and smaller screws, springs and washers.
DRT50 Brushless Motor and Controller Parts
The DRT50 uses a brushless motor, so there are no conventional carbon brushes to replace. The motor assembly includes the 629280-5 stator and 519449-8 rotor assembly, with alternative stator part numbers listed for some production versions.
The electronic control system is equally important, with the parts breakdown identifying 620720-6 controller A, together with updated controller references 620F52-7 and 620L08-6 for applicable versions.
If the DRT50 has power but will not run, cuts out or behaves erratically, the battery and external controls should be checked first before investigating the brushless motor and controller.
DRT50 Switch and LED Parts
The DRT50's operating controls include a dedicated 632K92-3 switch unit and 144662-5 switch plate complete. These components sit within the main housing alongside the electronic control system.
The tool also incorporates an LED work light, with the 620721-4 LED circuit listed as a separate replacement component.
If the DRT50 switch is not working, the tool is intermittent or the LED has stopped illuminating, these individual electrical components can be checked against the parts diagram. Because several electronic parts have revised numbers, matching the original part number is particularly useful.
DRT50 Collet and Router Base Parts
The collet and base assembly are among the most important components when using the DRT50 for precision routing. The parts catalogue includes the 763637-1 1/4" collet cone, 763619-3 3/8" collet cone, 763615-1 collet nut and associated base hardware.
The standard trimmer base is identified as 142403-3 trimmer base complete, with 196612-6 and 196613-4 trimmer base sets also listed for applicable versions.
If the DRT50 collet is damaged, an accessory is not being held securely or the base has developed excessive movement, the individual collet, nut, lock lever and base components can be inspected.
DRT50 Base, Depth Adjustment and Locking Parts
The DRT50 can be configured with different base assemblies, allowing it to be used for a wider range of routing tasks. The parts breakdown includes the 163524-8 lock lever complete, 346392-6 cam plate, 454842-8 base protector and various thumb screws, washers and locking components.
A correctly functioning base is important for maintaining the required cutting depth and keeping the router stable against the workpiece. If the DRT50 base is loose or the height adjustment is difficult to secure, the locking lever, cam plate, screws, washers and related components should be checked.
Additional bases, including plunge and other routing configurations, are available as accessories for the DRT50 platform.
DRT50 Bearings, Gears and Drive Components
Although the DRT50 has a brushless motor, its rotating drive still contains conventional mechanical components that can wear through use. The parts list includes 210017-7 ball bearing 607DDW, 210301-0 ball bearing 6003DDW, 227262-7 spur gear 16 and 253906-3 wave washer 26.
If the DRT50 is making a grinding or rattling noise, has developed unusual vibration or the cutter is not rotating smoothly, the bearings and drive components are worth investigating.
A worn bearing can also affect the alignment of the rotating assembly, making it important to investigate unusual noise or movement rather than continuing to use the tool without inspection.
DRT50 Housing and Small Replacement Parts
The main housing protects the motor, controller and electrical connections. The parts breakdown identifies the 183G76-5 housing set and 144661-7 outer housing complete, along with rubber pins, push buttons, screws and other small fittings.
The 452468-0 push button and 233127-3 compression spring 7 are examples of the smaller components that can be replaced individually. These parts can be useful when repairing a DRT50 that has suffered physical damage or has been dismantled for servicing.
Finding the Correct Makita DRT50 Parts
When searching for Makita DRT50 parts online, check the exact version of the trimmer before ordering, particularly when buying electronic components, motor parts or a complete base assembly. Makita's parts documentation shows revised components and different configurations across the DRT50 range.
From the DRT50 brushless motor, rotor and stator to the controller, switch, LED circuit, collets, router bases, lock lever, gears, bearings and housing components, the parts diagram provides a detailed reference for identifying the correct spare.
Using the original Makita part number alongside the DRT50 parts diagram is the most reliable way to match a replacement component to your particular cordless router trimmer.