Makita DTD152 Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 35 | 266429-2 | TAPPING SCREW 3X16 TD126/ |
£1.00 |
|
| 2 | 851E29-7 | DTD152 NAME PLATE | £1.00 |
|
| 36 | 263005-3 | RUBBER PIN 6 DUR/ |
£1.00 |
|
| 36 | 183B63-4 | HOUSING SET | £9.85 |
|
| 36 | 183B64-2 | HOUSING SET | £10.55 |
|
| 5 | 455053-8 | F/ |
£1.00 |
|
| 6 | 632F26-6 | SWITCH UNIT | £32.15 |
|
| 6 | 620445-2 | LED CIRCUIT | £3.35 |
|
| 6 | 688164-6 | LINE FILTER DFS441/ |
£1.00 |
|
| 7 | 643852-2 | TERMINAL BUR181/ |
£4.05 |
|
| 8 | 231951-8 | RING SPRING 11 BTD/ |
£1.00 |
|
| 9 | 267085-1 | NARROW WASHER 12 TD126/ |
£1.00 |
|
| 10 | 233005-7 | COMPRESSION SPRING 13 TD126 | £1.00 |
|
| 11 | 326072-0 | BIT SLEEVE BTD134/ |
£2.35 |
|
| 12 | 424738-7 | BUMPER | £1.00 |
|
| 13 | 143299-5 | HAMMER CASE COMPLETE | £8.35 |
|
| 14 | 261151-6 | NYLON WASHER 19 BTD134/ |
£1.00 |
|
| 18 | 216040-0 | STEEL BALL 3.5 TD126 | £1.00 |
|
| 16 | 326565-7 | ANVIL M | £7.05 |
|
| 17 | 326564-9 | HAMMER | £7.15 |
|
| 19 | 267175-0 | FLAT WASHER 24 HR1840/ |
£1.00 |
|
| 20 | 234251-5 | COMPRESSION SPRING 25 | £4.45 |
|
| 21 | 216041-8 | STEEL BALL 5.6 TD126/ |
£1.00 |
|
| 22 | 227362-3 | SPUR GEAR 22 BTD134/ |
£4.45 |
|
| 23 | 326562-3 | SPINDLE DTD152 | £7.65 |
|
| 24 | 256253-1 | PIN 5 BTD134LF10/ |
£1.00 |
|
| 25 | 253314-8 | THIN WASHER 15 HR3000C/ |
£1.00 |
|
| 26 | 227378-8 | INTERNAL GEAR 51 | £1.95 |
|
| 27 | 213507-9 | O RING 40 BTD134/ |
£3.15 |
|
| 28 | 143298-7 | BEARING BOX COMPLETE | £4.65 |
|
| 29 | 638396-5 | YOKE UNIT BTD043/ |
£11.45 |
|
| 30 | 619377-8 | ARMATURE | £14.55 |
|
| 31 | 196854-2 | CARBON BRUSH CB-448 (Pair) | £4.35 |
|
| 32 | 632F25-8 | BRUSH HOLDER COMPLETE | £9.25 |
|
| 32 | 688172-7 | Line Filter | £1.00 |
|
| 32 | 654037-5 | INSULATION TERMINAL FT1.25-M3 | £1.00 |
|
| 33 | 263032-0 | RUBBER PIN 4 BTD043/ |
£1.00 |
|
| 34 | 456044-2 | REAR COVER | £2.25 |
|
| 34 | 456045-0 | REAR COVER | £2.25 |
|
Makita DTD152 Spare Parts
The Makita DTD152 is a compact 18V LXT impact driver that has become a familiar tool in workshops and on building sites. With its high-speed impact mechanism, 165Nm maximum fastening torque and relatively compact body, it's well suited to repetitive screwdriving and fastening work where a conventional drill can be cumbersome.
The DTD152 is also a useful model from a repair perspective. Its parts breakdown includes separate motor, brush, switch, hammer and gear components, so a problem with one area doesn't necessarily mean replacing the complete impact driver. The Makita DTD152 parts diagram above gives you a detailed view of how those components fit together.
DTD152 Carbon Brush Replacement
If your DTD152 has started sparking, losing power, running intermittently or refusing to start, the carbon brushes are one of the first things worth checking. Unlike some of Makita's newer brushless impact drivers, the DTD152 uses replaceable CB-448 carbon brushes. Makita's own maintenance instructions recommend checking the brushes regularly and replacing them when they reach the wear limit.
The brush holder complete is also available separately, so a problem around the brush assembly doesn't automatically mean the armature or complete motor needs replacing.
DTD152 Hammer Mechanism and Anvil
The front of an impact driver takes a considerable amount of punishment, particularly when the tool is regularly used for heavy fastening. The DTD152 contains a dedicated hammer case, hammer, anvil, spindle, spur gears, internal gear and steel balls within its impact mechanism.
If the driver is impacting poorly, making a rattling or grinding noise, or no longer transferring torque properly, these components are worth investigating. Wear to the anvil or hammer assembly can have a noticeable effect on the tool's performance.
Switch, Battery Terminal and Electrical Faults
A DTD152 that won't respond to the trigger isn't necessarily suffering from a motor failure. The switch unit, forward/reverse change lever, LED circuit and battery terminal are all separately identified in the parts information.
The LED circuit can also be replaced independently, which is useful if the tool is operating normally but its work light has stopped functioning.
DTD152 Gear and Motor Components
The impact mechanism isn't the only area that can wear. The DTD152's internal assembly includes a bearing box, yoke unit, armature and carbon brush assembly, along with several gears and bearings.
Unusual motor noise, excessive vibration or a noticeable reduction in performance can justify checking the bearings and motor components. The availability of individual parts means an older DTD152 can often be approached as a repairable machine rather than simply replacing it when one component fails.
Identify the Correct DTD152 Part
The numbered Makita DTD152 exploded parts diagram above is particularly useful when working on the impact mechanism, where several small springs, washers, balls and gears work together. Find the component on the drawing, cross-reference its position with the parts list and check the exact Makita part number before ordering.
From DTD152 carbon brushes and brush holders to switches, anvil components, hammers, gears, bearings and housing parts, the individual spares give you plenty of options when servicing or repairing this popular Makita impact driver.