Makita DTD154 Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 38 | 266429-2 | TAPPING SCREW 3X16 TD126/ |
£1.00 |
|
| 4 | 455053-8 | F/ |
£1.00 |
|
| 5 | 143975-1 | SWITCH COMP DTW181/ |
£14.45 |
|
| 6 | 619408-3 | ROTOR DTD154 | £42.95 |
|
| 7 | 629217-2 | STATOR DTD170/ |
£15.15 |
|
| 8 | 620557-1 | LED CIRCUIT | £5.95 |
|
| 9 | 643860-3 | TERMINAL DHP480/ |
£4.25 |
|
| 10 | 231951-8 | RING SPRING 11 BTD/ |
£1.00 |
|
| 11 | 267085-1 | NARROW WASHER 12 TD126/ |
£1.00 |
|
| 12 | 233005-7 | COMPRESSION SPRING 13 TD126 | £1.00 |
|
| 13 | 326072-0 | BIT SLEEVE BTD134/ |
£2.35 |
|
| 14 | 424873-1 | BUMPER | £1.00 |
|
| 16 | 143951-5 | HAMMER CASE COMPLETE | £10.95 |
|
| 17 | 261155-8 | NYLON WASHER 24 DTD148/ |
£1.00 |
|
| 21 | 216001-0 | STEEL BALL 3.5 BPJ/ |
£1.00 |
|
| 19 | 326508-9 | ANVIL M DTD148/ |
£7.75 |
|
| 20 | 326711-2 | HAMMER | £19.35 |
|
| 22 | 267175-0 | FLAT WASHER 24 HR1840/ |
£1.00 |
|
| 23 | 234331-7 | COMPRESSION SPRING 24 DTD148 | £3.25 |
|
| 25 | 216041-8 | STEEL BALL 5.6 TD126/ |
£1.00 |
|
| 26 | 227338-0 | SPUR GEAR 22 DTD148/ |
£5.75 |
|
| 27 | 326783-7 | SPINDLE | £13.75 |
|
| 28 | 268311-1 | PIN 5 DTD148/ |
£1.00 |
|
| 29 | 253314-8 | THIN WASHER 15 HR3000C/ |
£1.00 |
|
| 30 | 221457-4 | INTERNAL GEAR 51 | £1.85 |
|
| 32 | 213507-9 | O RING 40 BTD134/ |
£3.15 |
|
| 33 | 143976-9 | BEARING BOX COMP DTD154 | £5.55 |
|
| 36 | 143954-9 | SWITCH PLATE COMPLETE | £2.25 |
|
| 37 | 457069-9 | REAR COVER | £2.55 |
|
| 39 | 266490-9 | TAPPING SCREW PT 2X6 DJV | £1.00 |
|
| 40 | 652069-6 | FLAT HD SCREW M3X6 DTD170/ |
£1.00 |
|
| 41 | 620564-4 | CONTROLLER | £68.45 |
|
| 35 | 183E36-5 | HOUSING SET | £12.35 |
|
| 35 | 263005-3 | RUBBER PIN 6 DUR/ |
£1.00 |
|
| 35 | 252126-6 | HEX LOCKING NUT M4-7 MT/ |
£1.00 |
|
| 2 | 852L16-1 | DTD154 NAME PLATE | £1.00 |
|
The Makita DTD154 is an 18V LXT brushless impact driver built around a compact, high-output drive system. With electronic three-speed control, a brushless motor and a maximum torque of 175 Nm, it is designed for demanding fastening work while remaining only 117mm long.
If your Makita DTD154 is not working, has lost impact power, is making unusual noises or has developed a problem with the switch, motor, gearbox or bit holder, individual Makita DTD154 spare parts can be used to identify the component requiring attention.
Makita DTD154 Parts Diagram and Parts List
The DTD154 parts diagram above breaks the impact driver down into its individual electrical, motor, gearbox and housing components. This is particularly useful when identifying small parts such as springs, steel balls, washers, pins and seals that can be difficult to identify from the assembled tool.
The parts list includes the switch, rotor, stator, LED circuit, terminal, hammer case, anvil, hammer, spindle, internal gear, bearing box, controller, housing and rear cover, along with numerous smaller mechanical components.
DTD154 Brushless Motor and Electrical Parts
Unlike older brushed Makita impact drivers, the DTD154 uses a brushless motor, so there are no conventional carbon brushes to replace. The motor system consists of the 619408-3 rotor and 629217-2 stator, working with the electronic controller to regulate the tool's speed and impact operation.
If your DTD154 has power but is not running correctly, the rotor, stator, controller, switch and battery terminal are among the components worth investigating. The 620564-4 controller and 143975-1 switch complete are separately identified in the parts list.
The DTD154 also has an LED circuit for the built-in work lights, so a lighting fault does not necessarily mean that the main motor has failed.
DTD154 Switch, Controls and Battery Terminal
The switch assembly controls the motor and electronic drive system, while the forward/reverse lever and selector components allow the user to control the tool's operation.
The parts catalogue includes the 143975-1 switch complete, 455053-8 F/R change lever, 143954-9 switch plate complete and 643860-3 terminal. The battery interface is particularly important on a cordless tool, as poor contact or a damaged terminal can prevent the driver from operating correctly.
If the Makita DTD154 will not start, cuts out intermittently or does not respond correctly to the controls, the switch and battery connection are worth checking before investigating the mechanical drive.
DTD154 Hammer, Anvil and Impact Mechanism
The impact mechanism converts the motor's rotation into the high-torque hammering action required for fastening. The DTD154 parts list includes the 143951-5 hammer case complete, 326508-9 anvil M, 326711-2 hammer, steel balls, springs, washers and related components.
If the DTD154 is spinning but not impacting correctly, or the impact action has become noticeably weaker, the hammer and anvil assembly should be inspected. Wear in the impact mechanism can affect the transfer of torque to the fastener.
The small steel balls, springs and washers are also important parts of the mechanism and can be individually identified from the diagram.
DTD154 Spindle, Gears and Bearing Parts
The front drive assembly contains the spindle and gears responsible for transferring power from the motor and impact mechanism to the bit holder. The parts breakdown identifies the 326783-7 spindle, 227338-0 spur gear 22, 221457-4 internal gear 51 and 143976-9 bearing box complete, along with washers, pins, O-rings and bearings.
If your DTD154 is making unusual gearbox noise, has excessive movement at the front or is struggling to transfer power under load, these mechanical components are worth checking.
DTD154 Bit Holder and Front Housing Parts
The bit holder assembly is subjected to repeated insertion, removal and impact forces during normal use. Components in this area include the bit sleeve, ring spring, compression spring, steel balls, front housing and associated retaining components.
A worn or damaged DTD154 bit holder can cause excessive movement or make it difficult to retain a bit correctly. Individual components can be identified from the parts list rather than assuming that the entire front assembly needs replacing.
DTD154 Housing, Rear Cover and Small Parts
The main DTD154 housing set 183E36-5 contains the handle and supports the internal electrical and mechanical assemblies. The parts breakdown also identifies the 457069-9 rear cover, rubber pins, locking nut, screws and other small fittings.
These smaller Makita DTD154 parts are useful when repairing a tool that has suffered damage to its casing or when replacing individual fasteners and fittings during a strip-down.
Finding the Right Makita DTD154 Parts
When searching for Makita DTD154 parts online, use the model number together with the part number shown on the parts list wherever possible. The DTD154 diagram contains numerous small components, and matching the number is the most reliable way to distinguish between similar-looking parts.
From the DTD154 brushless motor, rotor and stator to the controller, switch, hammer case, anvil, spindle, gears, bit-holder components, housing and smaller springs and washers, the parts diagram provides a detailed reference for identifying the correct Makita DTD154 replacement parts for your impact driver.