Makita DTD172 Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| A01 | 266622-8 | TRUSS HEAD SCREW M4X12/ |
£1.00 |
|
| A02 | 346317-0 | Belt Hook Clip | £2.36 |
|
| 002 | 8111E5-4 | DTD172 Name Plate | £1.00 |
|
| 004 | 231952-6 | RING SPRING 12 6911D/ |
£1.00 |
|
| 005 | 267101-9 | NARROW WASHER 14 6911D | £1.00 |
|
| 006 | 232592-3 | COMPRESSION SPRING 14 | £1.00 |
|
| 007 | 327883-6 | BIT SLEEVE DTD172 | £2.15 |
|
| 008 | 422689-8 | BUMPER DTD172 | £1.00 |
|
| 009 | 413493-6 | HAMMER CASE COVER DTD172 | £1.00 |
|
| 011 | 141A40-6 | HAMMER CASE COMPLETE DTD172 | £11.75 |
|
| 012 | 261168-9 | NYLON WASHER 29 DTD172 | £1.00 |
|
| 015 | 213166-9 | OIL SEAL 12.5 TD0101F/ |
£1.00 |
|
| 017 | 136562-3 | ANVIL M ASSY DTD172 | £8.55 |
|
| 018 | 327785-6 | HAMMER DTD172 | £6.05 |
|
| 019 | 216040-0 | STEEL BALL 3.5 TD126 | £1.00 |
|
| 020 | 267175-0 | FLAT WASHER 24 HR1840/ |
£1.00 |
|
| 021 | 232459-5 | COMPRESSION SPRING 24B DTD171 | £3.95 |
|
| 022 | 216011-7 | STEEL BALL 5.6/ |
£1.00 |
|
| 023 | 227350-0 | SPUR GEAR 22 DTD172 | £2.05 |
|
| 024 | 327784-8 | SPINDLE DTD172 | £29.95 |
|
| 025 | 268311-1 | PIN 5 DTD148/ |
£1.00 |
|
| 026 | 267283-7 | FLAT WASHER 21 BFL300FZ/ |
£1.00 |
|
| 027 | 422688-0 | SEAL DTD172 | £1.00 |
|
| 028 | 227882-7 | INTERNAL GEAR 51 DTD172 | £1.95 |
|
| 029 | 141A41-4 | BEARING BOX COMPLETE DTD172 | £7.15 |
|
| 030 | 266490-9 | TAPPING SCREW PT 2X6 DJV | £1.00 |
|
| 031 | 652069-6 | FLAT HD SCREW M3X6 DTD170/ |
£1.00 |
|
| 032 | 629217-2 | STATOR DTD170/ |
£15.15 |
|
| 033 | 620E81-4 | CONTROLLER DTD172 | £91.10 |
|
| 034 | 643874-2 | TERMINAL DTM52 | £3.65 |
|
| 035 | 8111F2-7 | DTD172 Serial No. Label | £0.00 |
|
| 036 | 619678-4 | ROTOR DTD172 | £26.05 |
|
| 037 | 413494-4 | REAR COVER DTD172 | £1.95 |
|
| 038 | 266429-2 | TAPPING SCREW 3X16 TD126/ |
£1.00 |
|
| 039 | 620F12-9 | LED CIRCUIT DTD172 | £5.35 |
|
| 040 | 632L84-8 | SWITCH UNIT DTD171 | £11.75 |
|
| 041 | 455053-8 | F/ |
£1.00 |
|
| 042 | 651442-7 | SWITCH C3JR-1A-1 TD001G | £16.95 |
|
| 043 | 263005-3 | RUBBER PIN 6 DUR/ |
£1.00 |
|
| 043 | 183S40-8 | HOUSING SET DTD172 | £10.65 |
|
| 043 | 252126-6 | HEX LOCKING NUT M4-7 MT/ |
£1.00 |
|
| 044 | 141F68-4 | SWITCH PLATE COMPLETE DTD172 | £1.95 |
|
Makita DTD172 Spare Parts
The Makita DTD172 is a compact 18V LXT brushless impact driver designed to deliver serious fastening performance from a remarkably small body. With 180Nm of maximum torque, a 114mm overall length, electronic 4-speed control and a 1/4" hex chuck, it's particularly useful when working in confined spaces where a larger impact driver becomes awkward.
The DTD172 is also packed with electronics and mechanical components that can be replaced individually. The Makita DTD172 parts diagram above covers everything from the front impact mechanism and spindle through to the brushless motor, controller, switch and housing.
DTD172 Hammer and Anvil Repairs
The hammer mechanism and anvil are naturally exposed to considerable forces during heavy fastening work. If your DTD172 has started making unusual noises, developed excessive movement or isn't delivering the same impact as it once did, these components are worth investigating.
The parts list includes the hammer case, anvil assembly, hammer, spindle, spur gears, internal gear, steel balls, springs and seals. Wear in one of these components can affect the way torque is transferred to the fastener, particularly on a driver that's seen extensive use.
DTD172 Spindle and Gearbox
Grinding noises, vibration or reduced performance under load can also point towards the gearbox, spindle or bearings. The DTD172 uses three spur gears along with an internal gear and bearing box, all working together to transfer power from the motor to the impact mechanism.
The spindle and bearing box are particularly important when diagnosing a driver that feels mechanically rough. Checking these components alongside the hammer and anvil can help narrow down the source of the problem rather than assuming the complete impact assembly needs replacing.
Brushless Motor and Controller
The DTD172 uses Makita's brushless motor technology, so there are no conventional carbon brushes to replace. Instead, the electrical system includes a separate rotor, stator, controller, switch unit and battery terminal.
If the impact driver won't start, cuts out, loses power or behaves intermittently, these components are worth considering. The controller is particularly important because it manages the electronic operation of the brushless motor and the DTD172's various power settings.
Switch, LEDs and Front Components
The DTD172 has electronic 4-speed control along with twin LED work lights, so the controls and lighting system contain several individual parts. The parts breakdown includes the switch unit, forward/reverse change lever, switch plate and LED circuit.
At the front of the tool, the bit sleeve, bumper, hammer case cover and associated springs and washers can also suffer damage through regular use. A worn bit sleeve or damaged bumper doesn't necessarily indicate a problem with the motor or impact mechanism.
DTD172 Housing and Physical Damage
The DTD172's compact design makes it particularly convenient for site work, but that also means the housing can receive plenty of knocks. The housing set, rear cover, bumper, switch plate and smaller fittings are all represented in the parts information.
This is useful when restoring a well-used impact driver that remains mechanically sound but has suffered damage to the casing or controls. Even smaller items such as springs, pins, washers, seals and retaining components can be important when rebuilding the tool.
Find the Right DTD172 Replacement Part
Use the Makita DTD172 parts diagram above to identify the area of the tool you're working on, then match the numbered component with the DTD172 parts list to confirm the correct Makita part number.
From DTD172 hammers, anvils and spindles to gears, bearings, controllers, switches, LED components and housing parts, there are numerous individual Makita DTD172 replacement parts available for servicing this high-performance impact driver. Repairing the specific component that's worn or damaged can be a practical way to keep a good DTD172 working rather than replacing the complete machine.