Skip to main content

Makita DTW300 Parts

A01 266622-8
TRUSS HEAD SCREW M4X12/BAP182
£1.00
A02 346317-0
Belt Hook Clip
£2.36
A04 453974-8
LATCH FOR STACKING CASE MACPAK
£2.13
A06 821550-0
STACKING CASE TYPE 2 157MM
£60.34
A10 8013Y9-6
Plastic Case Label
£1.00
A11 213398-8
O RING 24 6915D/BTW150/6918
£1.75
A13 8013Y8-8
Indication Label
£1.00
A14 268057-9
PIN 4X24 6915D/BTW150/TW200
£1.95
A16 DC18RC
DC18RC COMPACT CHARGER
£152.96
A17 450128-8
BATTERY COVER BDG800/DTW251
£1.00
A18 197600-6
BATTERY BL1830B SET
£0.00
C10 263005-3
RUBBER PIN 6 DUR/DHR/DTW/DG
£1.00
C20 252126-6
HEX LOCKING NUT M4-7 MT/TD126
£1.00
C30 8012S9-8
SWITCH LABEL TW001G
£1.00
RUBBER PIN DTW181/TW100D/1001
£1.00
RUBBER PIN 5 BTD/DTM51/TW1001
£1.00
NAME PLATE DTW300
£1.00
BUMPER DTW300
£2.05
HAMMER CASE COVER DTW300
£1.95
HAMMER CASE COMPLETE DTW300
£11.25
HEX. SOCKET HEAD BOLT M4X25
£1.00
NYLON WASHER 28
£1.00
RING SPRING 10 6904/6931DW/69
£1.00
ANVILE ASSY DTW300
£29.05
HAMMER DTW300
£23.45
STEEL BALL 3.5 BPJ/DTD154/TL06
£1.00
FLAT WASHER 24 HR1840/HR1841F
£1.00
COMPRESSION SPRING 25 DTW300
£3.05
STEEL BALL 5.6/DTW285
£1.00
SPUR GEAR 22 DTD148/DTD154
£5.75
SPINDLE DTW300
£34.75
PIN 5 DTD148/DTD154/DTD170
£1.00
RING SPRING 43 BTW150/151SA
£1.00
INTERNAL GEAR 51 DTW281/DTW285
£3.35
O-RING 49 DTW281/DTW285
£1.00
INTERNAL GEAR CASE COMP DTW300
£8.05
TAPPING SCREW PT 2X6 DJV
£1.00
FLAT HD SCREW M3X6 DTD170/863L
£1.00
CONTROLLER DTW300
£104.15
STATOR DTW300
£8.45
ROTOR DTW300
£18.65
REAR COVER DTW300
£2.25
TAPPING SCREW BIND 3 X 16 L14
£1.00
LED CIRCUIT DTD170/DFT085F
£6.75
F/R CHANGE LEVER DTD148/DTD154
£1.00
SWITCH C3JR-4B HP001G
£18.35
TERMINAL DTM52
£3.65
SWITCH PLATE COMPLETE DTW300
£2.15
HOUSING SET DTW300
£12.75
CUSHION DHP480/DDF480/TW1001
£1.00
Serial Number Label
£1.00

The Makita DTW300 is an 18V LXT brushless impact wrench built for the jobs where a combi drill or a standard impact driver simply runs out of muscle — scaffolding, structural steel, plant maintenance, agricultural repair and wheel work. With 330 Nm of maximum fastening torque and 580 Nm of nut-busting torque from a tool weighing as little as 1.5 kg with a battery fitted, it delivers genuine breaker-bar performance in a body short enough to work between bracing tubes and inside wheel arches.

Four-speed control, not just raw power

What separates the DTW300 from cruder high-torque wrenches is its electronic four-stage speed and torque selector. A single button steps the tool through four calibrated settings — 100, 160, 210 and 330 Nm — with matched no-load speeds of 1,000, 1,800, 2,600 and 3,200 rpm and impact rates from 1,800 up to 4,000 ipm. That means you can wind fittings down quickly on a low setting without shearing threads or crushing a component, then step up to full power only for the final tightening pass. Bolt capacity runs M10–M20 in standard steel and M10–M16 in high-tensile.

Reverse auto-stop: the scaffolder's feature

The DTW300 includes Makita's reverse rotation auto-stop function, with three selectable reaction times. In reverse, the tool detects the moment a nut breaks free and cuts the motor automatically, so the fastener isn't spun off the thread and dropped. On a scaffold lift or working at height, that single feature prevents most dropped-fixing incidents — and it works in forward rotation too, stopping the tool once a preset seating point is reached. Combined with a full-time electric brake, it gives a level of control that pneumatic wrenches can't match.

Built for site conditions

A brushless motor sits at the heart of the tool, drawing less current, running cooler and eliminating brush wear, which extends both runtime per charge and overall service life. Makita's eXtreme Protection Technology (XPT) seals the motor and switch housing against dust ingress and water spray, so the wrench keeps working in rain, on muddy ground and in dusty demolition environments. A twin-LED work light illuminates the fastener in dark voids and under vehicles, and the variable-speed trigger allows precise starts on stubborn or partially seized nuts.

Specifications at a glance

  • Max fastening torque: 100 / 160 / 210 / 330 Nm (four settings)
  • Nut-busting torque: 580 Nm
  • No-load speed: 0–1,000 / 1,800 / 2,600 / 3,200 rpm
  • Impacts per minute: 0–1,800 / 2,600 / 3,400 / 4,000 ipm
  • Drive: 1/2" square
  • Bolt capacity: M10–M20 standard, M10–M16 high tensile
  • Dimensions: 144 x 81 x 246 mm
  • Weight: 1.5–1.8 kg with battery (1.2 kg net)
  • Battery: 18V LXT Li-ion (compatible with the full LXT range)

Available as a body-only unit (DTW300Z) or as a complete kit with batteries, charger and case, the DTW300 slots straight into an existing 18V LXT battery platform — no new chargers, no new spares. For anyone replacing an air line and compressor, or carrying a breaker bar they'd rather leave in the van, it is one of the most capable cordless wrenches in its class.