Skip to main content

Makita DUR368L Parts

Drawings
*BAND ASSEMBLY DUR365
£5.82
CUTTER ASSEMBLY 95-M10L SET
£19.70
Cutter Blade Set
£10.42
Price on application
£0.00
HEX WRENCH 4
£2.36
ACCESSORY BAG FOR CORDLESS GRASS TRIMMER
£4.32
HEX. WRENCH 5
£1.00
Price on application
£19.82
PLASTIC BLADE ASSEMBLY 255-M10L
£17.50
BLADE GUARD SET DUR368A
£25.30
POWER SUPPLY CORD UNIT
£8.25
LOCK OFF LEVER DUR364L/365U
£2.45
TORSION SPRING 9 DUR364/365U
£1.00
SWITCH LEVER DUR364/DUR187/188
£3.45
SWITCH UNIT DUR364/DUR187/188
£12.15
SUB CONTROLLER COMPLETE G
£20.95
SWITCH LABEL
£1.00
INDICATION LABEL
£1.00
TORSION SPRING 10 DUR182/365
£2.65
GRIP SET DUR364L/DUR187/DUR188
£12.55
POWER SUPPLY CORD UNIT DUR364
£30.05
LINE FILTER BHS630/DFS441/451
£1.00
CLAMP 24 ER2650/ER2550/EN4951
£1.00
CORD CLAMP HP1641/4350/HR2230
£1.00
CONTROLLER
£135.45
TERMINAL DUR182/DHR165/DKP180
£3.35
HOUSING SET
£18.45
RUBBER PIN 6 DUR/DHR/DTW/DG
£1.00
HEX LOCKING NUT M4-7 MT/TD126
£1.00
NAME PLATE DUR368L
£1.00
SPECIAL PAN HD SCREW M4X12
£1.00
BATTERY GUARD DUR364L/DUR365U
£9.25
HANGER BBC231U/BBC300L/BUX360
£4.75
HEX BOLT M5X18 DUR188L
£1.00
PAN HD SCREW M5X20 W/CP WASHE
£1.00
TOP COVER DUR364L/DUR365U
£4.45
BALL BEARING 607ZZ BO3710/MT4
£1.00
STATOR ASSY DUR364L/DUR365UZ
£63.85
ROTOR DUR365
£65.95
INNER COVER DUR364L /DUR365U
£1.00
CONTROLLER B DUR364L /DUR365U
£15.25
STRAIN RELIEF LS1013/2012NB
£1.00
HSH BOLT M5X16 BHX2501/EBH251
£1.00
HEX SOCKET HD BOLT M5X25/365U
£1.00
MOTOR HOUSING COMP DUR364/365
£20.95
BALL BEARING 6001DDW HS7100
£5.75
INTERNAL RETAINING RING-28
£1.00
CLAMP WASHER BBC231URD/ELM265
£1.85
RECEIVE WASHER COMPLETE G
£9.45
HEX SOCKET HD BOLT M6X30 BUR3
£1.00
PROTECTOR CLAMP EBH253L/BBC23
£1.85
POLYPROPYLENE WASHER 4
£1.85
PROTECTOR DUR365U
£11.75
CUTTER DUR364L/DUR365U
£3.15
TAPPING SCREW M4X18 EBH253/EB3
£1.00
PIPE COMPLETE O
£20.95
LABEL/MAKITA LOGO ER2650LHKR
£1.00
CAUTION LABEL
£1.00
O RING 19 CC300/CC301
£1.00
CUP EBH253L/EBH341L&U/BBC231U
£4.05
HEX NUT M10-17 EBH251U.BBC231
£2.85
HSH BOLT M5X20 DUR361/365
£2.15
PROTECTOR CLAMP DUR361/365
£3.35
*PROTECTOR DUR365
£12.65
SPRING WASHER 6 DLW140
£1.00
WASHER BUR360/EM2651LH/EBH253
£1.00
LABEL/SOUND 92DB DUR364
£1.00
DUR368L SERIAL NO. LABEL
£1.00
SPACER EBH252L/BUX360/CS246.4
£2.45
PIPE HOLDER 24 DUX60
£1.95
H.S.H BOLT M5X25 BUX360/CS246
£1.00
DAMPER DUX60
£1.75
LOWER CLAMP 35 DUX60
£1.75
UPPER CLAMP 35 DUX60
£1.00
LOOP HANDLE
£10.15
HSH BOLT M5X20 WITH WG AR411HR
£1.00
BARRIER COMPLETE DUX60Z
£4.55
PAN HEAD SCREW M4X16 BHX2501
£1.00

The Makita DUR368L is a 36V cordless grass trimmer powered by two 18V LXT batteries in series. It uses a brushless motor with three electronic speed settings, reverse rotation and Active Feedback Sensing Technology (AFT), with a loop handle configuration for controlled trimming around lawns, borders and other areas of vegetation.

With its 350mm nylon cutting head and compatibility with a 255mm metal or plastic blade, the DUR368L has a number of replaceable mechanical, electrical and cutting components. If your Makita DUR368L is not working, has stopped cutting properly or has developed a problem with the motor, controller, shaft, switch or cutting assembly, the relevant Makita DUR368L spare parts can be identified from the parts diagram.

Makita DUR368L Parts Diagram and Parts List

The Makita DUR368L parts diagram covers the handle, electrical controls, electronic modules, motor assembly, shaft, guard and cutting components. It also includes the many smaller fixings, springs, clamps, bearings and brackets used throughout the trimmer.

The parts list includes the 632E26-0 switch unit, 140L81-5 sub controller, 620A36-5 controller, 644808-8 battery terminal, 183L33-3 housing set, 529146-8 stator assembly and numerous mechanical components.

Checking the exact DUR368L model when ordering is important, as the DUR368L and similar Makita cordless brushcutters can use different handle and component arrangements.

DUR368L Brushless Motor and Controller Parts

Unlike older brushed garden tools, the DUR368L uses a brushless motor, so there are no conventional carbon brushes to replace. The motor is controlled electronically, with separate controller and sub-controller assemblies forming part of the electrical system.

The parts information identifies the 529146-8 stator assembly, 620A36-5 controller and 140L81-5 sub controller. If your DUR368L has power but the motor is not running, these components may need to be considered after checking the batteries, terminals and switch.

The electronic control system is also responsible for features such as the three-speed operation, reversing function, soft start and AFT protection. A fault in the control system can therefore affect more than just the motor starting.

Makita DUR368L Switch and Handle Parts

The loop-handle version of the trimmer has a number of components around the operator controls. These include the 455629-1 lock-off lever, 233621-5 torsion spring, 455625-9 switch lever and 632E26-0 switch unit.

If the Makita DUR368L switch is not working, the external lever and spring should be inspected as well as the electrical switch itself. Damage to a small mechanical component can prevent the switch from operating correctly.

The handle assembly also includes the grip set, clamps, screws and other fittings, allowing individual components to be identified when the handle has been damaged or becomes loose.

DUR368L Shaft and Loop Handle Parts

The long shaft transfers the motor's rotation to the cutting head and forms the main structural connection between the motor housing and lower cutting assembly. The parts list includes the 140L89-9 pipe complete, 457269-1 pipe holder, 424942-8 damper, 347113-9 upper clamp, 347114-7 lower clamp and 457267-5 loop handle.

If your DUR368L shaft or handle is loose, inspect the clamps, holder, damper and associated fixing hardware. These components are important for maintaining the correct position of the loop handle during operation.

The shaft assembly also contains bearings and collars that support the rotating mechanism, so unusual vibration or mechanical noise may warrant closer inspection of this area.

Makita DUR368L Cutting Head and Blade Parts

The DUR368L can be configured with different cutting systems, including a nylon trimmer head, plastic blade and 255mm metal blade. The parts listings include the 198892-0 cutter assembly 95-M10L, 346855-2 cutter and 140L84-9 receive washer complete.

If the DUR368L cutting head is not rotating correctly, inspect the cutting head, washer, spindle and associated retaining components. A damaged or incorrectly fitted cutting component can cause vibration and affect cutting performance.

The machine uses an M10 x 1.25 left-hand spindle arrangement, so the correct cutting-head components should be matched carefully to the model.

DUR368L Guard and Protector Parts

The cutting guard provides protection around the rotating blade or trimmer head. The parts breakdown identifies the 455926-5 protector, 346073-2 protector clamp, 144315-6 barrier complete and related screws and hardware.

If the Makita DUR368L guard is damaged or loose, check the protector and mounting components rather than assuming that the complete lower assembly needs replacing. Cracked plastic, damaged clamps or missing fasteners can all affect the fit of the guard.

The correct guard arrangement is particularly important when changing between different cutting attachments.

Bearings and Small DUR368L Parts

The DUR368L contains numerous smaller components that support the motor and rotating assemblies. These include 210062-2 and 210269-0 ball bearings, O-rings, retaining rings, washers, spacers, springs, screws and various shaft components.

A worn bearing can contribute to increased vibration or unusual noise, while a damaged spring, clamp or fixing can affect the operation of the controls or shaft assembly.

These smaller DUR368L replacement parts are also useful when a trimmer has been dismantled for repair and a particular component has become worn, damaged or lost.

Finding the Correct Makita DUR368L Parts

When searching for Makita DUR368L parts online, check the model number carefully before ordering, particularly when selecting electrical or cutting components. The parts diagram provides a useful reference for matching individual components to their correct position within the trimmer.

From DUR368L controller and switch parts to the brushless motor, shaft, loop handle, bearings, cutting head, blade components and protective guard, the parts list covers the main assemblies required when servicing this 36V cordless grass trimmer.