Makita HM0810 Parts
1 Compatible Accessory Available!
Enhance your Makita HM0810 with our range of accessories
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 1 | 421196-8 | *BARREL COVER HM0810 | £6.55 |
|
| 1 | 421541-7 | BARREL COVER HM0810 | £5.65 |
|
| 2 | 922341-3 | CAP HD SCREW M6X25 HM0870/ |
£1.00 |
|
| 4 | 151413-9 | *BARREL COMP HM0810 | £75.20 |
|
| 4 | 151457-9 | BARREL COMPLETE HM0810 | £82.30 |
|
| 5 | 213554-0 | O RING 44 AN711/ |
£1.00 |
|
| 6 | 321929-0 | STRIKER HM0810 | £10.65 |
|
| 7 | 412073-5 | INNER RING 26 HM0810 | £14.85 |
|
| 8 | 412053-1 | PISTON RING 30 HM0810 | £13.15 |
|
| 9 | 412053-1 | PISTON RING 30 HM0810 | £13.15 |
|
| 10 | 321514-9 | INNER RING 26 HM0810 | £3.05 |
|
| 11 | 321958-3 | PISTON HM0810 | £15.95 |
|
| 12 | 256165-8 | PIN 8 HM0810 | £2.25 |
|
| 13 | 813002-5 | *MAKITA LABEL 4014B/ |
£1.00 |
|
| 14 | 150368-5 | *CRANK CAP HR3850/ |
£6.15 |
|
| 14 | 411709-3 | CRANK CAP HM0810 | £6.35 |
|
| 15 | 213654-6 | O RING 60 HM1110/ |
£2.15 |
|
| 16 | 312956-8 | ROD HR3850 | £17.15 |
|
| 17 | 212108-0 | NEEDLE BEARING 1212 8035NB | £9.95 |
|
| 18 | 321954-1 | CRANK SHAFT HM0810 | £12.05 |
|
| 19 | 254001-2 | WOODRUFF KEY 4 9609B/ |
£1.00 |
|
| 20 | 962203-3 | RETAINING RING R-47 | £1.00 |
|
| 21 | 211264-3 | *BALL BEARING 6303 | £0.00 |
|
| 21 | 211279-0 | BALL BEARING 6303LLU HM1110/ |
£11.25 |
|
| 22 | 213606-7 | O RING 48 HM1110/ |
£1.00 |
|
| 23 | 157627-8 | CRANK HOUSING COMPLETE HM0810 | £39.85 |
|
| 24 | 213260-7 | OIL SEAL 17 HM0810 | £3.15 |
|
| 25 | 221669-9 | HELICAL GEAR 41 HM0810 | £14.85 |
|
| 26 | 157628-6 | GEAR HOUSING HM0810 | £18.25 |
|
| 27 | 212102-2 | NEEDLE BEARING 1210 59BR 8035 | £5.25 |
|
| 28 | 321210-9 | HANDLE SHAFT HM1200K/ |
£2.25 |
|
| 29 | 253955-0 | FLAT WASHER 24 HM0810 | £7.15 |
|
| 30 | 321495-7 | IMPACT BOLT HM0810 | £15.95 |
|
| 32 | 213420-1 | *X RING 28 HM0810/ |
£15.95 |
|
| 32 | 213428-5 | X RING 28 HM0810 | £15.95 |
|
| 33 | 213411-2 | O RING 27 HM0810/ |
£3.75 |
|
| 34 | 193003-2 | TOOL HOLDER SET HM0810 | £76.65 |
|
| 34 | 322594-8 | *TOOL HOLDER HM0810 TIB144 | £68.75 |
|
| 36 | 165047-2 | TOOL RETAINER | £22.50 |
|
| 36 | 165071-5 | TOOL RETAINER HM0810 | £25.65 |
|
| 37 | 331194-3 | SEAL HM0810 | £4.45 |
|
| 38 | 213459-4 | O RING 32 DA4031/ |
£2.15 |
|
| 39 | 211106-1 | BALL BEARING 6201LLB LS1030/ |
£6.75 |
|
| 39 | 211144-3 | BALL BEARING 6201LLB | £5.90 |
|
| 40 | 213102-5 | DUST SEAL 6201-12 4157KB | £1.00 |
|
| 41 | 241827-1 | FAN 82 HR3520 | £7.15 |
|
| 42 | 516145-9 | ARMATURE 110V HM0810 | £78.95 |
|
| 42 | 516149-1 | ARMATURE 240V HM0810 | £78.95 |
|
| 42 | 518602-3 | *ARMATURE 110V HM0810 | £71.05 |
|
| 42 | 518603-1 | *ARMATURE 240V HM0810 | £73.10 |
|
| 43 | 681625-5 | INSULATION WASHER 4157KB | £1.00 |
|
| 44 | 211031-6 | BALL BEARING 608LLB(/ |
£3.25 |
|
| 45 | 263014-2 | RUBBER PIN 4 SR2600/ |
£1.00 |
|
| 46 | 410509-8 | BAFFLE PLATE HM0810 | £2.25 |
|
| 47 | 265345-5 | HEX HD SCREW M5 X 60 HM1100C | £1.85 |
|
| 48 | 522506-3 | FIELD 110V HM0810 | £25.65 |
|
| 48 | 527427-4 | FIELD ASS'Y 115V | £25.60 |
|
| 48 | 527430-5 | FIELD ASS'Y 240V | £51.10 |
|
| 48 | 528783-5 | FIELD ASS'Y 240V | £51.15 |
|
| 50 | 855553-2 | *NAME PLATE HM0810 | £1.00 |
|
| 51 | 157629-4 | *MOTOR HOUSING HM0810 | £27.95 |
|
| 51 | 159634-7 | MOTOR HOUSING HM0810 | £40.95 |
|
| 52 | 181038-5 | CARBON BRUSH CB-105 | £7.65 |
|
| 53 | 643600-9 | BRUSH HOLDER CAP CB-7E/ |
£1.00 |
|
| 54 | 941151-9 | FLAT WASHER 6 DIN125-B BHS630 | £1.00 |
|
| 56 | 922371-4 | *CAP HD SCREW M6X50 HM0810 | £1.00 |
|
| 57 | 922226-3 | HEX SOCKET HD BOLT M5X18 EBH2 | £1.00 |
|
| 58 | 942101-7 | SPRING WASHER 5 | £1.00 |
|
| 59 | 284059-7 | REAR COVER HM0810 | £4.55 |
|
| 60 | 413020-9 | *SPONGE 38.5-46 HR3850 | £1.00 |
|
| 60 | 423257-0 | SPONGE 38.5-46 HR3850 | £1.00 |
|
| 61 | 931302-2 | HEX FULL NUT M6 LF1000/ |
£1.00 |
|
| 62 | 942151-2 | *SPRING WASHER 6 | £1.00 |
|
| 63 | 941151-9 | FLAT WASHER 6 DIN125-B BHS630 | £1.00 |
|
| 64 | 273457-0 | GRIP 32 | £17.30 |
|
| 65 | 341922-8 | GRIP BASE HM0810 | £2.15 |
|
| 66 | 321497-3 | CLAMP NUT HM0810 | £8.65 |
|
| 67 | 341914-7 | GRIP CLAMP HM0810 | £4.35 |
|
| 68 | 922316-2 | CAP HD SCREW M6X14 | £1.00 |
|
| 70 | 343753-1 | CUSHION PLATE HMO810 NEW | £3.95 |
|
| 71 | 651038-4 | SWITCH HPAHR6-3S | £9.95 |
|
| 73 | 265914-2 | *CAP HD SCREW M5X25 | £1.00 |
|
| 74 | 911109-2 | PAN HEAD SCREW M4 X 8 BHS630 | £1.00 |
|
| 75 | 645253-0 | NOISE SUPPRESSOR 110V | £3.95 |
|
| 76 | 685700-9 | SPONGE SHEET JN3200/ |
£1.00 |
|
| 77 | 181816-3 | *HANDLE SET HM0810 | £11.45 |
|
| 78 | 682540-6 | CORD GUARD HS6100/ |
£1.00 |
|
| 79 | 665937-4 | POWER SUPPLY CORD 1.0-2-5.0 | £21.15 |
|
| 79 | 692541-6 | POWER SUPPLY CORD 1.00-2-5.0 | £19.85 |
|
| 80 | 687031-2 | STRAIN RELIEF HK1820L/ |
£1.00 |
|
| 81 | 911133-5 | PAN HD SCREW M4X18 KP0810C | £1.00 |
|
| 82 | 181816-3 | *HANDLE SET HM0810 | £11.45 |
|
| 82 | 182590-6 | HANDLE SET HM0810 | £17.15 |
|
| 83 | 911243-8 | PAN HD SCREW M5X25 W/ |
£1.00 |
|
| 85 | 262051-3 | RUBBER RING 9 6MM HMO810 | £4.25 |
|
| 86 | 262052-1 | RUBBER RING 9 3MM HMO810 | £2.45 |
|
| 87 | 257636-8 | SLEEVE 6 HMO810 | £2.15 |
|
| 88 | 231936-4 | RING SPRING 30.5 HR3000C/ |
£1.00 |
|
| 89 | 267112-4 | FLAT WASHER 34 HM0810 (TIB144) | £3.25 |
|
| 90 | 233052-8 | COMPRESSION SPRING 25 HM0810 | £5.75 |
|
| 91 | 267112-4 | FLAT WASHER 34 HM0810 (TIB144) | £3.25 |
|
| 92 | 213508-7 | O RING 38 UK360D/ |
£1.00 |
|
| 93 | 267203-1 | FLAT WASHER 43 HM0810 | £1.00 |
|
| 400 | 150595-4 | PLASTIC CARRYING CASE COMPLETE | £26.50 |
|
| 400 | 150879-0 | PLASTIC CARRYING CASE COMPLETE | £69.06 |
|
| 401 | 798023-7 | BULL POINT 17-280 | £7.60 |
|
| 401 | A-80450 | BULL POINT 17X280 | £8.10 |
|
| 404 | 783202-0 | HEX WRENCH 4 | £2.36 |
|
The Makita HM0810 is a heavy-duty 17mm demolition hammer designed for chiselling, breaking and other demanding applications. Its conventional electric motor drives a substantial impact mechanism, with the barrel, piston, striker and crankshaft all working together to deliver the hammering action.
As an older Makita demolition hammer, individual components can be particularly useful when repairing a machine that has developed wear in the impact mechanism or motor. If your Makita HM0810 is not working, has lost impact power, is making excessive noise or has developed a problem with the tool holder, the correct Makita HM0810 spare parts can help identify the source of the fault.
Makita HM0810 Parts Diagram and Parts List
The HM0810 parts diagram separates the demolition hammer into its barrel, impact, crank, gear and motor assemblies. The detailed parts list includes the major assemblies as well as individual O-rings, piston rings, bearings, pins, washers, springs and retaining rings.
This is useful when an HM0810 has been dismantled for repair, as many of the smaller components are located internally and can be difficult to identify without the corresponding parts list.
HM0810 Barrel, Striker and Piston Parts
The front barrel contains the components responsible for generating and transferring the hammering action. The parts breakdown includes the 151457-9 barrel complete, 321929-0 striker, 321958-3 piston, piston rings, inner rings and associated O-rings.
If the HM0810 has lost impact power, the piston, striker and sealing components are worth inspecting. Wear within the impact mechanism can affect the efficiency of the hammering action, while damaged rings or seals may become apparent when the barrel is dismantled.
The barrel cover is also available separately, with references including 421541-7, depending on the particular parts listing.
HM0810 Crankshaft and Drive Components
The crank mechanism converts the rotation of the motor into the movement required by the piston and striker. The parts list identifies the 321954-1 crankshaft, 312956-8 connecting rod, 212108-0 needle bearing and 221669-9 helical gear 41, together with the crank housing and supporting components.
If your Makita HM0810 is running but the hammer action is not operating correctly, the crankshaft, connecting rod, needle bearing and associated drive components should be investigated.
Worn bearings or damaged gears can also produce unusual mechanical noise or excessive vibration while the tool is operating.
HM0810 Tool Holder and 17mm Parts
The HM0810 uses a 17mm hex tool holder for chisels and other demolition accessories. The front assembly contains the tool-retaining components, springs, steel balls, change ring and sealing parts required to hold and release the accessory.
If the HM0810 tool holder is loose, difficult to operate or failing to retain a chisel correctly, inspect the individual retaining and locking components. The parts catalogue includes components such as the 193004-0 tool holder set, 216004-4 steel balls, 233191-4 compression spring, change ring and retaining ring.
These smaller parts can become important when servicing the front of an older demolition hammer.
Makita HM0810 Armature, Field and Carbon Brushes
The HM0810 uses a brushed electric motor, with separate armature, field and carbon-brush components available in the parts information. Several armature references are listed for different voltage versions, including 516149-1, 518602-3 and 518603-1, while field assemblies include separate 110V and 240V references.
The 181038-5 CB-105 carbon brush is another key service component, fitted alongside the brush holders and caps.
If the HM0810 is losing power, sparking heavily, cutting out or refusing to start, the carbon brushes, armature, field and motor bearings should be checked. Excessively worn brushes are a common reason to investigate the motor on an older brushed tool.
HM0810 Bearings, Seals and Motor Housing
The motor and impact assemblies rely on several bearings and sealing components. The parts list includes bearings such as 211279-0 6303LLU and 211031-6 608LLB, together with oil seals, dust seals and O-rings.
The 159634-7 motor housing is also identified separately, along with the fan, baffle plate, brush holders and rear cover.
If the HM0810 has developed excessive vibration, unusual bearing noise or overheating, these supporting components are worth checking while the machine is being serviced.
HM0810 Switch, Cable and Electrical Parts
Electrical components are another area to investigate if the Makita HM0810 will not start or operates intermittently. The machine uses a conventional switch and cord arrangement, with the motor connected through the internal electrical components and brush assembly.
Voltage is particularly important with this model. The parts information identifies separate 110V and 240V armatures and fields, so the rating of the machine should always be checked before ordering motor or electrical components.
Finding the Right Makita HM0810 Parts
When searching for Makita HM0810 parts online, use the exact model number together with the part number from the relevant list. This is especially important with an older machine where alternative and superseded part numbers may appear across different catalogues.
From the HM0810 barrel and striker assembly to the piston, crankshaft, tool holder, bearings, gears, carbon brushes, armature, field and motor housing, the available parts information makes it possible to identify individual components rather than relying on the complete machine assembly.
Matching the part number and voltage to your particular Makita HM0810 replacement parts requirement is the best way to avoid ordering an incorrect component.
Accessories for Makita HM0810
This model also has 1 accessories available.
Scroll down to view them.