Makita HM0870C Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 1 | 286287-0 | TOOL HOLDER CAP HM0870C/ |
£1.95 |
|
| 2 | 451432-8 | CHUCK COVER HM0870C/ |
£3.55 |
|
| 3 | 231984-3 | RING SPRING 25 HR5001C/ |
£1.00 |
|
| 4 | 267272-2 | FLAT WASHER 28 HM0860C | £2.45 |
|
| 5 | 424261-2 | RUBBER RING 28 HM0870C/ |
£2.45 |
|
| 6 | 331659-5 | CHUCK RING HM0860C/ |
£4.95 |
|
| 7 | 310108-5 | TOOL RETAINER HM0860C/ |
£4.65 |
|
| 8 | 345360-6 | *SPRING GUIDE HM0860C/ |
£10.15 |
|
| 9 | 233387-7 | COMPRESSION SPRING 52 HM0860C | £1.00 |
|
| 10 | 346141-1 | PLATE HM0870C/ |
£2.45 |
|
| 11 | 310145-9 | LOCK RING HM0860C/ |
£9.05 |
|
| 12 | 451433-6 | CHUCK RING HM0870C/ |
£4.95 |
|
| 13 | 257960-9 | RETAINING RING/ |
£4.55 |
|
| 14 | 267273-0 | FLAT WASHER 29 HM0860C | £1.00 |
|
| 15 | 424261-2 | RUBBER RING 28 HM0870C/ |
£2.45 |
|
| 16 | 216002-8 | STEEL BALL 4.8 TW100D/ |
£1.00 |
|
| 17 | 324387-9 | TOOL HOLDER HM0860C/ |
£51.15 |
|
| 18 | 213527-3 | O RING 38 HM0860C | £1.00 |
|
| 19 | 213431-6 | FLUORIDE RING 28 HM1202C/ |
£10.45 |
|
| 20 | 213394-6 | O RING 23 HM1202C/ |
£1.00 |
|
| 21 | 324389-5 | IMPACT BOLT HM0860C/ |
£8.55 |
|
| 22 | 325732-1 | RING 20 HM0870C/ |
£5.55 |
|
| 23 | 424245-0 | RUBBER RING 20 HM0870C/ |
£3.25 |
|
| 24 | 318512-2 | BARREL HM0870C | £65.35 |
|
| 25 | 922341-3 | CAP HD SCREW M6X25 HM0870/ |
£1.00 |
|
| 26 | 213656-2 | O RING 53 BO3710/ |
£1.95 |
|
| 27 | 267407-5 | FLAT WASHER 23 HM0870C/ |
£1.95 |
|
| 28 | 451639-6 | GUIDE RING HM0870/ |
£3.25 |
|
| 29 | 450098-1 | SLIDE SLEEVE HM0860C/ |
£2.85 |
|
| 30 | 324388-7 | 'STRIKER HM0860C/ |
£6.55 |
|
| 31 | 213958-6 | O RING 24 HM0860C | £2.35 |
|
| 32 | 331658-7 | 'CYLINDER 32 HM0860C/ |
£28.55 |
|
| 33 | 233927-1 | 'RING SPRING 34 HM0860C | £1.00 |
|
| 34 | 331660-0 | 'RING 36 HM0860C/ |
£6.55 |
|
| 35 | 233386-9 | 'COMPRESSION SPRING 37 HM0860C | £1.00 |
|
| 36 | 233927-1 | 'RING SPRING 34 HM0860C | £1.00 |
|
| 37 | 317719-7 | CYLINDER GUIDE HM0860C | £6.45 |
|
| 38 | 213611-4 | O RING GD0810C/ |
£1.00 |
|
| 39 | 233927-1 | 'RING SPRING 34 HM0860C | £1.00 |
|
| 40 | 267079-6 | FLAT WASHER 34 HM0860C | £8.05 |
|
| 41 | 451444-1 | HOUSING COVER HM0870C | £13.15 |
|
| 42 | 922243-3 | CAP HD SCREW M5X25 HM0870/ |
£1.00 |
|
| 43 | 419988-7 | FILTER CAP HR2811FT/ |
£1.00 |
|
| 44 | 213218-6 | O RING 16 2414K/ |
£1.00 |
|
| 45 | 443129-3 | FILTER HR2811FT/ |
£1.00 |
|
| 46 | 451434-4 | CRANK CAP HM0870C/ |
£3.55 |
|
| 47 | 424244-2 | SEAL RING HM0870C/ |
£1.00 |
|
| 48 | 911233-1 | PAN HD SCREW M5X20 W/ |
£1.00 |
|
| 49 | 268104-6 | PIN 8 HM0860C | £1.00 |
|
| 50 | 213958-6 | O RING 24 HM0860C | £2.35 |
|
| 51 | 213432-4 | O RING 26/ |
£1.00 |
|
| 52 | 418349-8 | PISTON HM0860C | £1.95 |
|
| 53 | 418350-3 | CONNECTING ROD HM0860C/ |
£1.00 |
|
| 54 | 325735-5 | CRANK SHAFT 17 HM0870C | £22.25 |
|
| 55 | 962157-4 | RETAINING RING R-40 HM0870/ |
£1.00 |
|
| 56 | 211281-3 | *BALL BEARING 6203LLU | £8.05 |
|
| 57 | 267825-7 | WAVE WASHER 30 HM0870/ |
£1.00 |
|
| 58 | 140206-9 | CRANK HOUSING COMP HM0870C | £86.90 |
|
| 60 | 266041-8 | PT SCREW 5X25 KP0810C KP0810 | £1.00 |
|
| 61 | 419008-7 | FIX GUIDE HR4011C/ |
£1.00 |
|
| 62 | 423345-3 | CUSHION PLATE HM1110/ |
£1.00 |
|
| 63 | 213133-4 | OIL SEAL 12 | £5.55 |
|
| 64 | 211106-1 | BALL BEARING 6201LLB LS1030/ |
£6.75 |
|
| 65 | 253759-0 | THIN HARD WASHER 12 JN3200 | £1.00 |
|
| 84 | 152620-7 | HANDLE BASE COMPLETE HM1100C | £12.05 |
|
| 85 | 417002-3 | SIDE HANDLE CAM HM1202C/ |
£1.75 |
|
| 86 | 265439-6 | HEX HD BOLT M8X150 | £2.15 |
|
| 87 | 417003-1 | SIDE HANDLE HM1202C/ |
£8.65 |
|
| 88 | 252640-2 | WING NUT M8 HM1100C/ |
£6.55 |
|
| 89 | 134909-5 | SIDE HANDLE ASSY HM1100C/ |
£24.50 |
|
| 90 | 240119-5 | FAN 76 HM0870C/ |
£3.25 |
|
| 91 | 513791-9 | ARMATURE ASSY 110V HM0870/ |
£74.45 |
|
| 91 | 513793-5 | ARMATURE ASSY 240V HM0870/ |
£74.45 |
|
| 92 | 681650-6 | INSULATION WASHER HM0870/ |
£4.95 |
|
| 93 | 210005-4 | BALL BEARING 608DDW GA5020 | £6.15 |
|
| 94 | 451438-6 | BAFFLE PLATE HM0870C/ |
£2.15 |
|
| 95 | 266095-5 | TAPP SCREW 5X55 UC3530A/ |
£1.00 |
|
| 96 | 625756-0 | FIELD 110V HM0870C/ |
£19.45 |
|
| 96 | 625764-1 | FIELD 240V HM0870C/ |
£19.45 |
|
| 97 | 451423-9 | MOTOR HOUSING HM0870C/ |
£20.55 |
|
| 98 | 194160-9 | CARBON BRUSH CB-350 HR4013C (Pair) | £8.35 |
|
| 99 | 265995-6 | TAPPING SCREW 4X18 | £1.00 |
|
| 100 | 451442-5 | REAR COVER HM0870C/ |
£5.95 |
|
| 101 | 265995-6 | TAPPING SCREW 4X18 | £1.00 |
|
| 102 | 638674-3 | BRUSH HOLDER UNIT HM0870/ |
£8.85 |
|
| 103 | 631929-5 | CONTROLLER 110V HM0870C | £60.75 |
|
| 103 | 631930-0 | CONTROLLER 240V HM0870C | £60.75 |
|
| 104 | 638675-1 | LEAD UNIT HM0870/ |
£4.95 |
|
| 105 | 451428-9 | LENS HM0870C/ |
£1.85 |
|
| 106 | 266192-7 | TAPPING SCREW 4X14 VC3211M | £1.00 |
|
| 111 | 266041-8 | PT SCREW 5X25 KP0810C KP0810 | £1.00 |
|
| 113 | 867390-2 | *NAME PLATE HM0870C | £1.00 |
|
| 114 | 266041-8 | PT SCREW 5X25 KP0810C KP0810 | £1.00 |
|
| 117 | 140207-7 | HANDLE COMP HM0870C | £25.05 |
|
| 118 | 451440-9 | SLIDE LEVER HM0870C | £2.65 |
|
| 121 | 232209-8 | LEAF SPRING HM1110/ |
£1.00 |
|
| 122 | 263027-3 | RUBBER PIN 4 | £1.00 |
|
| 123 | 451427-1 | SWITCH LEVER HM0870C/ |
£1.00 |
|
| 124 | 265995-6 | TAPPING SCREW 4X18 | £1.00 |
|
| 125 | 651418-4 | SWITCH ST115A-40 GA4540/ |
£7.05 |
|
| 126 | 654531-7 | TERMINAL BLOCK 2P UH45/ |
£2.15 |
|
| 127 | 687169-3 | STRAIN RELIEF GA/ |
£1.00 |
|
| 128 | 265995-6 | TAPPING SCREW 4X18 | £1.00 |
|
| 129 | 695228-9 | *POWER SUPPLY CORD 1.5-2-4.0 | £12.05 |
|
| 129 | 692623-4 | POWER SUPPLY CORD 1.5-2-4.0 | £23.45 |
|
| 130 | 682560-0 | CORD GUARD 10 HM1317C/ |
£2.25 |
|
| 131 | 265995-6 | TAPPING SCREW 4X18 | £1.00 |
|
| 132 | 451445-9 | HANDLE COVER HM0870/ |
£14.85 |
|
| 133 | 423411-6 | RUBBER PLATE HM0870C/ |
£1.00 |
|
| 1001 | 194683-7 | Grease vessel set, 100 ml | £7.60 |
|
| 1002 | 443122-7 | CLOTH BHR262/ |
£3.05 |
|
| 1003 | 824905-8 | PLASTIC CARRYING CASE | £110.96 |
|
| 1004 | 809667-9 | *LABEL FOR PLASTIC CASE HM0870 | £1.00 |
|
| 5001 | 655030-2 | PLUG UK TYPE 16A-4H/ |
£8.34 |
|
| 5002 | 654091-9 | NON INSULATED TERMINAL GD0801 | £1.00 |
|
| 5003 | 801G22-3 | LABEL/ |
£1.00 |
|
The Makita HM0870C is a corded SDS-Max demolition hammer intended for demanding concrete and masonry work. Its variable-speed motor delivers up to 2,650 blows per minute, with Makita specifying 11.4J of impact energy for the machine. The tool also has 12 bit-angle settings, an automatic brush cut-off and an LED indicator for brush replacement.
When a demolition hammer develops a fault, the problem can be mechanical, electrical or concentrated around the SDS-Max tool holder. The Makita HM0870C spare parts list contains a substantial number of individual components, making it possible to identify the particular part involved in a repair.
Makita HM0870C Parts Diagram and Parts List
The Makita HM0870C parts diagram above covers the complete machine, from the front tool holder through to the motor, crank mechanism, electrical controls and handles.
There are numerous small components within the front assembly alone, including the tool holder cap, chuck cover, chuck ring, tool retainers, spring guide, change ring, retaining rings, steel balls and several O-rings. The main assembly also contains the barrel, cylinder, piston, connecting rod, crankshaft, bearings and crank housing.
HM0870C SDS-Max Tool Holder Parts
The tool holder is subjected to repeated impact as the HM0870C is used for chiselling and breaking. Wear around this area can affect how securely the SDS-Max accessory is retained or introduce unwanted movement at the front of the machine.
The parts catalogue includes the 324387-9 tool holder, 324389-5 impact bolt, 331659-5 chuck ring, 310108-5 tool retainer, 451433-6 change ring and 346677-0 spring guide. There are also several springs, rubber rings, washers and retaining components supporting the holder assembly.
If the HM0870C is not holding a chisel correctly, the retaining mechanism and front assembly are worth examining rather than assuming the complete tool holder has failed.
HM0870C Piston, Cylinder and Impact Mechanism
The impact mechanism converts the rotation of the motor into the powerful reciprocating action required for demolition work. The HM0870C parts list includes the 418349-8 piston, 418350-3 connecting rod, 325735-5 crank shaft 17 and 331658-7 cylinder 32, together with guide components, springs, O-rings and sealing rings.
If the HM0870C has lost impact power while the motor is still running, the mechanical impact system should be considered. Excessive noise, unusual vibration or movement at the front of the machine can also justify inspecting the piston, cylinder, crankshaft and associated bearings.
HM0870C Armature, Field and Carbon Brushes
The motor contains several replaceable electrical components, including the armature, field, brush holder and carbon brushes. The automatic brush cut-off is designed to help protect the commutator when the brushes reach the end of their serviceable life.
If your HM0870C is sparking, losing power or cutting out, the carbon brushes and motor assembly are worth checking. The correct electrical parts should be matched to the voltage and exact machine version.
The motor section also contains bearings and supporting components, so excessive motor noise does not necessarily indicate an electrical fault alone.
HM0870C Switch, Controller and Electrical Parts
A demolition hammer that suddenly becomes completely unresponsive may have a fault in its control or electrical system rather than its impact mechanism.
The HM0870C parts information includes the 651418-4 switch, controller components, brush holder, terminal components, lead wires and other electrical parts. These components sit within the main housing and handle assembly and can be identified individually from the parts breakdown.
If the Makita HM0870C will not start, the power supply, switch, brushes and internal electrical connections should be investigated before moving on to the mechanical sections of the machine.
HM0870C Bearings, Seals and Internal Components
The impact mechanism relies on numerous bearings and sealing components to keep the moving parts correctly supported and lubricated. The parts list includes components such as the 211281-3 6203LLU ball bearing, alongside O-rings, seal rings, retaining rings, flat washers and other internal fittings.
These smaller HM0870C parts can become particularly important during a strip-down or rebuild. A damaged seal or retaining ring may be relatively inexpensive compared with a major assembly, but it still needs to be the correct component for the machine.
HM0870C Housing and Handle Components
The main housing and handles provide support for the motor and impact mechanism while giving the operator control over the demolition hammer. The parts breakdown includes the housing cover, crank cap, side handle components, grip parts, switch lever and other external fittings.
If the machine has suffered damage during heavy site use, individual covers, grips, handles and fixings can be identified from the HM0870C parts list. This is also useful when a machine has previously been dismantled and needs missing screws, rings or other small components replacing.
Choosing the Correct HM0870C Spare Parts
When searching for Makita HM0870C parts online, use the complete HM0870C model designation and check the part number against the diagram before ordering. This is especially important with internal motor and impact components, where similar Makita demolition hammers can use different assemblies.
Whether you're looking for an HM0870C tool holder, impact bolt, piston, cylinder, crankshaft, carbon brush, armature, switch, bearing, seal or housing component, the numbered parts list gives you a clear reference for identifying the individual component involved.
For an older HM0870C showing a specific fault, identifying the assembly where the problem occurs is the useful first step — particularly with a machine containing as many individual mechanical parts as this demolition hammer.