Skip to main content

Makita HM1203C Parts

TOOL HOLDER CAP HM1203/HM1213
£3.25
RING SPRING 26 HM1203/HM1213
£1.75
FLAT WAHSER 30 HM1203/1213
£8.55
CHUCK COVER HM1203/HM1213
£4.25
RUBBER RING 30 HM1203/1213
£6.05
CHUCK RING HM1203/1213
£19.95
RELEASE COVER HM1203/1203C/
£4.85
TOOL RETAINER HM1203/1213
£5.55
SPRING GUIDE HM1203/1213
£3.35
COMPRESSION SPRING 56 HM1203/1
£4.65
RETAINING RING WR-45 HR5001C
£1.95
CHANGE RING COVER HM1203/1203C
£4.45
CHANGE RING HM1203/1213
£37.55
LOCK RING HM1203/1213
£22.25
CAP HD SCREW M5X25 HM0870/71C
£1.00
HOUSING COVER HM1203
£23.45
RING SPRING 35 HM1203/HM1213
£1.85
BARREL COMP HM1203/1213
£88.00
HEX SOCKET HD BOLT M8 X 35 HR
£1.00
O RING 67 GA7050/GA9050/
£1.95
RUBBER RING 39 HM1203/1213
£8.05
FLAT WASHER 39 HM1203/1213
£7.65
O RING 35.5 HM1203/1213
£2.55
TOOL HOLDER HM1203/1213
£164.05
X-RING 21 HR4511C
£3.75
FLUORIDE RING 28 HM1202C/HR500
£10.45
O RING 23 HM1202C/HR5001C
£1.00
IMPACT BOLT HM1203/1213
£24.55
SHOULDER SLEEVE HM1203/1213
£11.05
RUBBER RING 24 HM1203/1203C/
£6.05
SHOULDER SLEEVE HM1203/1213
£11.05
*STRIKER HM1203/1213
£20.55
STRIKER HM1203/1213
£48.95
O RING 31.5 HM1203/1213
£4.55
O RING 44 HM1203/1213
£3.05
ONEWAY VALVE GUIDE HM1203/1213
£1.95
*CYLINDER 40 HM1203/1213
£87.20
CYLINDER 40 HM1203/1213
£111.85
PIN 12 HR5211C
£1.00
O RING 31.5 HM1203/1213
£4.55
PISTON HM1203/HM1213
£8.65
O RING 35 HM1203/1213
£1.85
CONNECTING ROD HM1203/HM1213
£8.55
CRANK CAP COVER HM1203/HM1213
£3.25
PAN HD SCREW M4X18 KP0810C
£1.00
FILTER
£1.00
CRANK CAP HM1203/HM1213
£4.25
SEAL RING HM1203/HM1213
£1.00
CRANK HOUSING HM1203
£149.25
HS BUTTON HD SCREW M6X40 HM120
£1.75
FIX GUIDE HR4011C/HM1110/1111
£1.00
CUSHION PLATE HR5211/HM1203
£1.00
CRANK SHAFT HM1203/1213
£15.95
BALL BEARING 6206LLU
£18.25
HELICAL GEAR 57 HM1203/1213
£42.15
FLAT WASHER 12 HM1203/1213
£2.15
SEAL RING HM1203/HM1213
£1.00
GEAR HOUSING CO HM1203/1213
£39.85
OIL SEAL 15 BHR262/HM1203/BHR
£5.65
SLEEVE 12 HR4500C/4511C/BHR26
£4.25
BALL BEARING 6000DDW HM1317C-B
£11.65
FLAT WASHER 15 HM1317C-CB/HM12
£1.75
FAN - NOW SOLD WITH ARMATURE
£0.00 Not Available
ARMATURE ASSY 110V HM1203/1213
£131.15
ARMATURE ASSY 240V HM1203/1213
£131.15
INSULATION WASHER HM1317C-CB/
£7.65
BALL BEARING 6000DDW
£2.60 Not Available
BALL BEARING 6000DDW 2RDCM
£3.15
BAFFLE PLATE HM1203/HM1213
£3.05
TAPP SCREW 5X55 UC3530A/KP0810
£1.00
FIELD 115V
£23.45
FIELD 220-240V
£23.45
MOTOR HOUSING HM1203/HM1213
£39.85
BRUSH HOLDER UNIT HR1317C-CB/H
£8.45
*CARBON BRUSH CB-171 HR1317C/C (Pair)
£6.95
REAR COVER HM1203/HM1213
£4.25
PT SCREW 5X25 KP0810C KP0810
£1.00
TAPPING SCREW 4X18
£1.00
TAPPING SCREW 4X14 VC3211M
£1.00
CONTROLLER 110V HM1203
£71.05
CONTROLLER 240V HM1203
£63.05
LEAD UNIT HM1203/1213
£6.65
LENS HR4011C/4001C/HM1302
£1.00
LEAF SPRING HM1110/HM1317C/CB
£1.00
100 450891-3
LEVER STOPPER HM1203/HM1213
£1.75
101 866622-4
*NAME PLATE HM1203
£1.00
102 266041-8
PT SCREW 5X25 KP0810C KP0810
£1.00
103 450897-1
SLIDE LEVER HM1110/1111/1203
£3.05
106 450907-4
HANDLE HM1203
£42.15
107 263027-3
RUBBER PIN 4
£1.00
108 651423-1
SWITCH BTM/3707F/3708F/DTM51
£8.05
109 423379-6
SPONGE SHEET HM1110/1111/1213
£1.00
110 654531-7
TERMINAL BLOCK 2P UH45/55/65
£2.15
111 682560-0
CORD GUARD 10 HM1317C/CB/HR30
£2.25
112 695228-9
*POWER SUPPLY CORD 1.5-2-4.0
£12.05
112 692623-4
POWER SUPPLY CORD 1.5-2-4.0
£23.45
113 687169-3
STRAIN RELIEF GA/GD/SG125
£1.00
114 265995-6
TAPPING SCREW 4X18
£1.00
115 450908-2
HANDLE COVER HM1203/HM1213
£17.15
116 265995-6
TAPPING SCREW 4X18
£1.00
117 265439-6
HEX HD BOLT M8X150
£2.15
118 417002-3
SIDE HANDLE CAM HM1202C/HR4500
£1.75
119 318505-9
SIDE HANDLE BASE 82A HM1203/13
£11.25
120 951166-8
SPRING PIN 5-24 HM1202C/LC1230
£1.00
121 318506-7
SIDE HANDLE BASE 82B HM1203/13
£13.15
122 417003-1
SIDE HANDLE HM1202C/1110/1111
£8.65
123 417002-3
SIDE HANDLE CAM HM1202C/HR4500
£1.75
124 252640-2
WING NUT M8 HM1100C/HM1200K
£6.55
125 267164-5
THIN BLUE WASHER 15 HS0600
£1.00
127 135269-8
SIDE HANDLE ASSY HM1203C/1213C
£63.00
128 801Y75-0
CLEAR LABEL
£0.00
1001 A-80787
BULL POINT 280 SDS-MAX
£16.56
1002 194659-4
Drill grease 100 ml in pump tube
£6.50
1002 194683-7
Grease vessel set, 100 ml
£7.60
1003 443122-7
CLOTH BHR262/HR4011C/4001C
£3.05
1004 824876-9
PLASTIC CARRRYING CASE
£163.50
1005 809279-8
LABEL FOR 824876-9
£1.75
5001 655030-2
PLUG UK TYPE 16A-4H/110V
£8.34
5002 654091-9
NON INSULATED TERMINAL GD0801
£1.00

The Makita HM1203C is a heavy-duty SDS-Max demolition hammer built for demanding breaking and chiselling work. Its impact mechanism, tool holder, crank assembly and motor are made up of numerous individual components, meaning many faults can be traced to a specific worn or damaged part rather than the complete machine.

If your Makita HM1203C is not working, has lost impact power, is making unusual mechanical noise or has developed a problem with the tool holder, motor or switch, the correct Makita HM1203C spare parts can help identify the components required for repair.

Makita HM1203C Parts Diagram and Parts List

The HM1203C parts diagram above breaks the demolition hammer down into its individual mechanical, electrical and housing components. This is particularly useful for identifying smaller parts such as O-rings, springs, washers, bearings and retaining components that can be difficult to identify from the outside of the tool.

The parts list includes the complete barrel, tool holder, impact bolt, piston, connecting rod, crankshaft, gear housing, armature, field, brush holder, controller, switch, power cord and side handle assembly.

HM1203C Tool Holder and SDS-Max Parts

The front tool holder assembly is subjected to considerable force during demolition work. The HM1203C tool holder incorporates several serviceable components, including the tool holder cap, chuck cover, chuck ring, release cover, tool retainers, spring guide and change ring.

The parts list identifies components such as 424165-8 tool holder cap, 324987-5 chuck ring, 310279-8 tool retainer, 324985-9 tool holder and 324990-6 impact bolt.

If the chisel is not being held securely, is difficult to insert or remove, or there is excessive movement at the front of the machine, these components should be inspected against the parts diagram.

HM1203C Impact Mechanism Parts

The impact mechanism is at the heart of the demolition hammer. Inside the barrel are the piston, connecting rod, impact bolt, cylinder and numerous seals and rings that allow the mechanism to generate and transfer the hammering action.

The HM1203C parts list includes 331925-0 cylinder, 450961-8 piston, 450890-5 connecting rod, together with O-rings, an X-ring, fluoride ring, rubber rings and other sealing components.

If the HM1203C has lost impact power, is behaving erratically under load or is showing signs of mechanical wear around the barrel, the impact assembly and its associated seals are worth investigating.

Crankshaft, Gear and Bearing Parts

The crank assembly converts the motor's rotation into the movement required by the impact mechanism. The HM1203C uses a crankshaft, helical gear and several bearings within the crank and gear housing.

Replacement components include the 324994-8 crankshaft, 226691-1 helical gear 57, 211424-7 6206LLU ball bearing, 211249-9 6302LLU ball bearing and 158859-0 gear housing complete.

If the demolition hammer has developed excessive mechanical noise, vibration or movement within the drive system, inspecting the crankshaft, gears, bearings and related seals can help pinpoint the problem.

HM1203C Armature, Field and Motor Parts

The HM1203C uses a conventional brushed motor, with separate armature, field and brush-holder components. The parts catalogue identifies the 517818-7 armature assembly for 220–240V machines, along with the 636303-2 field and 638447-4 brush holder unit.

If the HM1203C is losing power, running intermittently or producing excessive sparking, the motor assembly and carbon brushes should be checked. Electrical components must be matched to the correct voltage version of the machine before ordering.

The rear cover, motor housing, baffle plate and insulation components are also listed separately, allowing individual parts of the motor assembly to be identified.

HM1203C Switch, Controller and Power Cord Parts

Electrical faults can prevent the demolition hammer from starting even when the mechanical components are in good condition. The HM1203C parts list includes the 631869-7 controller, 651423-1 switch, 638650-7 lead unit, 654531-7 terminal block, 665977-2 power supply cord, cord guard and strain relief.

If your Makita HM1203C will not start, cuts out during operation or has suffered damage to the cable or switch, these electrical components should be checked as part of the diagnosis.

HM1203C Handle and Housing Components

The side handle is important when controlling a large demolition hammer during heavy chiselling work. The HM1203C parts breakdown includes the side handle, handle bases, cams, wing nut, spring pin and mounting bolt as individual components.

The 135269-8 side handle assembly incorporates the associated handle components, while the main handle and handle cover are also separately identified.

Smaller housing components such as screws, rubber pins, lens components and the rear cover are included in the parts listing, making it easier to identify individual fittings during repair.

Choosing the Correct Makita HM1203C Parts

When searching for Makita HM1203C parts online, use the model number and the part number shown in the parts list to identify the required component. This is particularly important for electrical parts such as the armature and field, where voltage-specific versions are used.

From the HM1203C tool holder and impact mechanism to the crankshaft, bearings, gears, motor, controller, switch and side handle, the parts diagram provides a detailed reference for identifying the component needed for your repair.