Makita HR3210C Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 2 | 286282-0 | TOOL HOLDER CAP HR3210CT/ |
£1.75 |
|
| 3 | 233940-9 | RING SPRING 19 DHR164/ |
£1.00 |
|
| 4 | 450245-4 | CHUCK COVER HR3210CT/ |
£2.25 |
|
| 5 | 257288-5 | RING 21 HR3210CT/ |
£7.95 |
|
| 6 | 216022-2 | STEEL BALL 7.0 M3601/ |
£1.00 |
|
| 7 | 345873-7 | WASHER HR3210CT/ |
£1.75 |
|
| 8 | 234049-0 | CONICAL COMP SPRING 22-32 | £1.00 |
|
| 18 | 922341-3 | CAP HD SCREW M6X25 HM0870/ |
£1.00 |
|
| 19 | 158533-0 | BARREL COMP HR3210CT/ |
£18.25 |
|
| 20 | 213656-2 | O RING 53 BO3710/ |
£1.95 |
|
| 21 | 267810-0 | FLAT WASHER 34 HR3210CT/ |
£5.05 |
|
| 22 | 262138-1 | URETHANE RING 34 HR3210CT/ |
£1.85 |
|
| 23 | 267810-0 | FLAT WASHER 34 HR3210CT/ |
£5.05 |
|
| 24 | 324840-5 | TOOL HOLDER HR3210CT | £21.15 |
|
| 25 | 324849-7 | IMPACT BOLT HR3210CT | £7.05 |
|
| 26 | 213228-3 | O RING 15 HR3000C | £1.00 |
|
| 27 | 213228-3 | O RING 15 HR3000C | £1.00 |
|
| 28 | 213321-3 | FLUORO CARBON RESING RING 20 | £7.25 |
|
| 29 | 424062-8 | RUBBER RING 13 HR3210CT/ |
£6.05 |
|
| 30 | 324838-2 | SLIDE PLATE HR3210/ |
£2.35 |
|
| 31 | 256266-2 | PIN 6 HR3210CT/ |
£1.00 |
|
| 32 | 331794-9 | CYLINDER 25 HR3210CT/ |
£78.95 |
|
| 33 | 450243-8 | SLIDE SLEEVE HR3210/ |
£1.85 |
|
| 34 | 331805-0 | RING 29 HR3210CT/ |
£7.15 |
|
| 35 | 267360-5 | FLAT WASHER 40 HR3210/ |
£1.95 |
|
| 36 | 234052-1 | COMPRESSION SPRING 42 HR3210CT | £2.45 |
|
| 37 | 450236-5 | LOCK SLEEVE HR3210/ |
£1.85 |
|
| 38 | 234050-5 | COMPRESSION SPRING 34 HR3210FC | £2.35 |
|
| 39 | 331795-7 | DRIVING SLEEVE HR3210CT/ |
£18.25 |
|
| 40 | 213434-0 | O RING 26 5621RD/ |
£1.00 |
|
| 41 | 324858-6 | STRIKER HR3210CT/ |
£3.95 |
|
| 42 | 213283-5 | O RING 18 HR3210CT/ |
£2.15 |
|
| 43 | 213283-5 | O RING 18 HR3210CT/ |
£2.15 |
|
| 44 | 256087-2 | PIN 7 HR3210CT/ |
£1.00 |
|
| 45 | 324918-4 | PISTON HR3210CT/ |
£14.35 |
|
| 46 | 213262-3 | O RING 16 BFS440/ |
£1.00 |
|
| 47 | 450235-7 | CONNECTING ROD HR3210CT/ |
£1.00 |
|
| 48 | 227531-6 | SPIRAL BEVEL GEAR 37 HR3210CT/ |
£24.55 |
|
| 49 | 345867-2 | LINK ARM HR3210CT/ |
£4.45 |
|
| 50 | 213030-4 | O RING 8 BTM40/ |
£1.00 |
|
| 51 | 450248-8 | PIPE HOLDER HR3210CT/ |
£2.15 |
|
| 52 | 213030-4 | O RING 8 BTM40/ |
£1.00 |
|
| 53 | 450239-9 | SPRING GUIDE HR3210CT/ |
£1.00 |
|
| 54 | 234048-2 | COMPRESSION SPRING 10 HR3210CT | £2.15 |
|
| 55 | 213275-4 | O RING 18 HM0871C/ |
£1.00 |
|
| 56 | 331800-0 | PIPE 15 HR3210CT/ |
£3.25 |
|
| 57 | 213275-4 | O RING 18 HM0871C/ |
£1.00 |
|
| 58 | 324862-5 | COUNTER WEIGHT HR3210CT/ |
£9.45 |
|
| 59 | 234048-2 | COMPRESSION SPRING 10 HR3210CT | £2.15 |
|
| 60 | 450239-9 | SPRING GUIDE HR3210CT/ |
£1.00 |
|
| 61 | 213030-4 | O RING 8 BTM40/ |
£1.00 |
|
| 62 | 450248-8 | PIPE HOLDER HR3210CT/ |
£2.15 |
|
| 63 | 213030-4 | O RING 8 BTM40/ |
£1.00 |
|
| 64 | 266041-8 | PT SCREW 5X25 KP0810C KP0810 | £1.00 |
|
| 65 | 922123-3 | HEX SOCKET HD BOLT M4X14 DCS2 | £1.00 |
|
| 66 | 450254-3 | CRANK HOUSING COVER HR3210CT/ |
£6.75 |
|
| 67 | 266192-7 | TAPPING SCREW 4X14 VC3211M | £1.00 |
|
| 68 | 318201-9 | CRANK CAP COVER HR3210CT/ |
£8.45 |
|
| 69 | 265995-6 | TAPPING SCREW 4X18 | £1.00 |
|
| 70 | 450249-6 | CHANGE LEVER HR3210CT/ |
£2.55 |
|
| 71 | 233436-0 | COMPRESSION SPRING 3 HR4011C | £1.00 |
|
| 72 | 450250-1 | LOCK BUTTON HR3210/ |
£1.75 |
|
| 73 | 911128-8 | PAN HEAD SCREW M4X16 BHX2501 | £1.00 |
|
| 74 | 450241-2 | CRANK CAP HR3210CT/ |
£2.85 |
|
| 75 | 213223-3 | O RING 16 9036/ |
£1.00 |
|
| 76 | 158437-6 | SPUR GEAR 33 COMP HR3210/ |
£1.95 |
|
| 77 | 424064-4 | SEAL RING B HR3520CT/ |
£1.00 |
|
| 78 | 345868-0 | LINK PLATE HR3210/ |
£1.75 |
|
| 79 | 450247-0 | *AIR PIPE HR3210/ |
£2.85 |
|
| 80 | 263005-3 | RUBBER PIN 6 DUR/ |
£1.00 |
|
| 81 | 450242-0 | *GEAR SHAFT HR32103540/ |
£2.55 |
|
| 81 | 452126-8 | GEAR SHAFT HR32103540/ |
£2.55 |
|
| 82 | 158531-4 | *GEAR HOUSING COMP HR3210CT/ |
£41.55 |
|
| 82 | 158712-0 | GEAR HOUSING COMP HR3210/ |
£35.85 |
|
| 83 | 443138-2 | FILTER HR3210CT/ |
£1.00 |
|
| 84 | 213030-4 | O RING 8 BTM40/ |
£1.00 |
|
| 85 | 450238-1 | FILTER CAP HR3210/ |
£1.00 |
|
| 86 | 450244-6 | CRANK GEAR HR3210CT/ |
£1.75 |
|
| 87 | 213223-3 | O RING 16 9036/ |
£1.00 |
|
| 87 | 213176-6 | O RING 14 VC3211M/ |
£1.00 |
|
| 88 | 450237-3 | CAP HOLDER HR3210CT/ |
£1.00 |
|
| 89 | 266192-7 | TAPPING SCREW 4X14 VC3211M | £1.00 |
|
| 90 | 324839-0 | CRANK SHAFT HR3210/ |
£8.85 |
|
| 91 | 211332-2 | BALL BEARING 6004LLU HR3000C | £4.55 |
|
| 92 | 961060-6 | EXT DIN 471 CIRCLIP-20 VC3211 | £1.00 |
|
| 93 | 231991-6 | CONICAL COMP SPRING 21-31 HR30 | £1.00 |
|
| 94 | 254239-9 | KEY 4 HR3000C | £1.75 |
|
| 95 | 324848-9 | CLUTCH HR3210CT/ |
£3.75 |
|
| 96 | 227188-3 | SPUR GEAR 33 HR3210CT/ |
£12.05 |
|
| 97 | 253197-6 | FLAT WASHER 10 7104L/ |
£1.00 |
|
| 98 | 961036-3 | RETAINING RING WR-10 HR3210/ |
£1.00 |
|
| 99 | 345869-8 | CUP WASHER 18 HR3210CT/ |
£1.85 |
|
| 100 | 424063-6 | SEAL RING A HR3210/ |
£1.00 |
|
| 101 | 158534-8 | GEAR HOUSING COMP HR3210/ |
£8.95 |
|
| 102 | 213415-4 | O RING 28 HM1110/ |
£1.00 |
|
| 103 | 227533-2 | SPIRAL BEVEL GEAR 9 HR3210/ |
£12.65 |
|
| 104 | 254239-9 | KEY 4 HR3000C | £1.75 |
|
| 105 | 210105-0 | BALL BEARING 6001LLU PW5000C | £3.95 |
|
| 106 | 125421-6 | TORQUE LIMITER ASS HR3210CT/ |
£40.95 |
|
| 107 | 257291-6 | RING 10 HR3210CT/ |
£1.85 |
|
| 108 | 210005-4 | BALL BEARING 608DDW GA5020 | £6.15 |
|
| 109 | 450251-9 | BAFFLE PLATE HR3210C/ |
£2.35 |
|
| 110 | 213133-4 | OIL SEAL 12 | £5.55 |
|
| 112 | 210105-0 | BALL BEARING 6001LLU PW5000C | £3.95 |
|
| 113 | 253084-9 | THIN WASHER 12 8419B/ |
£1.00 |
|
| 114 | 241863-7 | FAN HR3000C/ |
£2.15 |
|
| 115 | 513746-4 | ARMATURE ASSY 110V HR3210/ |
£47.15 |
|
| 115 | 513748-0 | ARMATURE ASSY 240V HR3210/ |
£47.15 |
|
| 116 | 681650-6 | INSULATION WASHER HM0870/ |
£4.95 |
|
| 117 | 210005-4 | BALL BEARING 608DDW GA5020 | £6.15 |
|
| 118 | 266056-5 | PT SCREW 5X45 9046/ |
£1.00 |
|
| 119 | 625810-0 | FIELD 110V HR3210CT/ |
£15.95 |
|
| 119 | 625813-4 | FIELD 240V HR3210CT/ |
£15.95 |
|
| 120 | 450252-7 | MOTOR HOUSING HR3210/ |
£17.15 |
|
| 122 | 194160-9 | CARBON BRUSH CB-350 HR4013C (Pair) | £8.35 |
|
| 123 | 450253-5 | REAR COVER HR3210CT/ |
£4.65 |
|
| 124 | 265995-6 | TAPPING SCREW 4X18 | £1.00 |
|
| 125 | 265995-6 | TAPPING SCREW 4X18 | £1.00 |
|
| 126 | 638519-5 | BRUSH HOLDER UNIT HR3210CT/ |
£7.95 |
|
| 127 | 631782-9 | CONTROLLER 110V HR3520/ |
£47.15 |
|
| 127 | 631784-5 | CONTROLLER 240V HR32103540 | £43.15 |
|
| 128 | 266192-7 | TAPPING SCREW 4X14 VC3211M | £1.00 |
|
| 129 | 638406-8 | LEAD UNIT HR4011C/ |
£1.85 |
|
| 130 | 450246-2 | CORD CLAMP BASE HR3210CT/ |
£1.95 |
|
| 131 | 266192-7 | TAPPING SCREW 4X14 VC3211M | £1.00 |
|
| 132 | 687169-3 | STRAIN RELIEF GA/ |
£1.00 |
|
| 133 | 266192-7 | TAPPING SCREW 4X14 VC3211M | £1.00 |
|
| 134 | 450240-4 | LENS HR3210CT/ |
£1.00 |
|
| 135 | 682560-0 | CORD GUARD 10 HM1317C/ |
£2.25 |
|
| 136 | 695228-9 | *POWER SUPPLY CORD 1.5-2-4.0 | £12.05 |
|
| 136 | 692623-4 | POWER SUPPLY CORD 1.5-2-4.0 | £23.45 |
|
| 137 | 266041-8 | PT SCREW 5X25 KP0810C KP0810 | £1.00 |
|
| 138 | 266041-8 | PT SCREW 5X25 KP0810C KP0810 | £1.00 |
|
| 139 | 450352-3 | SHOULDER SLEEVE 6 HM0871C/ |
£1.00 |
|
| 140 | 864538-7 | NAME PLATE HR3210CT | £1.00 |
|
| 141 | 911233-1 | PAN HD SCREW M5X20 W/ |
£1.00 |
|
| 142 | 266211-9 | PT SCREW 5X40 M6600 | £1.00 |
|
| 143 | 267066-5 | BLUE WASHER 5 HM0871C/ |
£1.00 |
|
| 144 | 234051-3 | COMPRESSION SPRING 11 HR3210CT | £1.85 |
|
| 145 | 450255-1 | HANDLE BASE HR3210/ |
£13.15 |
|
| 146 | 419014-2 | DUST COVER SUPPORT HR4011C | £1.85 |
|
| 147 | 421912-8 | DUST COVER HR4011C/ |
£2.85 |
|
| 148 | 450256-9 | HANDLE HR3541/ |
£6.25 |
|
| 149 | 419025-7 | SWITCH LEVER HR4011C/ |
£2.15 |
|
| 150 | 154626-1 | SWITCH HOLDER COMP HR4011C/ |
£2.15 |
|
| 151 | 650567-4 | *SWITCH TG73B-1 HR4011C/ |
£8.65 |
|
| 152 | 450257-7 | HANDLE COVER HR3210/ |
£10.25 |
|
| 153 | 265995-6 | TAPPING SCREW 4X18 | £1.00 |
|
| 154 | 267383-3 | FLAT WASHER 22 HR3210C/ |
£1.00 |
|
| 155 | 267721-9 | WAVE WAHER 15 HR3210CT/ |
£1.00 |
|
| 156 | 213083-3 | O RING 9 HR3210 | £1.00 |
|
| 1001 | 181573-3 | GREASE VESSEL 93G | £5.24 |
|
| 1001 | 194683-7 | Grease vessel set, 100 ml | £7.60 |
|
| 1002 | 135197-7 | GRIP 36 ASS'Y | £23.18 |
|
| 1003 | 824825-6 | PLASTIC CARRYING CASE | £75.46 |
|
| 1004 | 810409-6 | CAUTION CARD HR3210CT/ |
£1.00 |
|
| 1005 | 806480-6 | MODEL LABEL HR3210CT | £1.00 |
|
| 5001 | 655030-2 | PLUG UK TYPE 16A-4H/ |
£8.34 |
|
| 5002 | 654091-9 | NON INSULATED TERMINAL GD0801 | £1.00 |
|
The Makita HR3210C is a 32mm SDS-Plus rotary hammer designed for demanding drilling and chiselling applications. It provides three operating modes — rotary drilling, hammering with rotation and hammer-only operation — and incorporates features including soft start, a torque limiter and vibration-reduction measures.
With regular use, components inside the impact mechanism, tool holder, gearbox and motor can eventually wear or become damaged. If your Makita HR3210C is not working, has lost impact power, is making unusual noises or is having difficulty holding an SDS-Plus bit, the individual HR3210C spare parts can be identified from the parts diagram and list above.
Makita HR3210C Parts Diagram and Parts List
The HR3210C parts diagram provides a detailed breakdown of the rotary hammer, covering the front tool holder, barrel, impact mechanism, crank assembly, motor and electrical components. It is particularly useful for identifying the many small internal components that cannot easily be identified from the outside of the machine.
The parts list includes the tool holder cap, chuck cover, guide washer, springs, O-rings, tool holder, impact bolt, cylinder, striker, piston, connecting rod and crankshaft, along with the motor and electrical assemblies.
HR3210C SDS-Plus Tool Holder Parts
The SDS-Plus tool holder is subjected to considerable impact and vibration during drilling and chiselling. The parts catalogue identifies the 324840-5 tool holder, 324849-7 impact bolt, 286282-0 tool holder cap, 450245-4 chuck cover, 257288-5 ring 21 and 216022-2 steel ball 7mm.
If the HR3210C is not holding bits securely, the tool holder, retaining components, steel balls, springs and associated seals should be inspected. Excessive movement at the bit end can indicate wear in the tool-retention mechanism rather than a problem with the motor.
The front assembly also contains several washers, O-rings and springs that work together to maintain the correct movement and sealing around the SDS-Plus mechanism.
HR3210C Piston, Striker and Impact Mechanism
The impact system is at the heart of the HR3210C. Its parts breakdown includes the 324858-6 striker, 324918-4 piston, 450235-7 connecting rod, 331794-9 cylinder 25, 331795-7 driving sleeve and 324849-7 impact bolt.
If the HR3210C has lost impact power, these components are among the areas worth investigating. Worn seals, damaged impact components or problems within the piston and cylinder assembly can affect how effectively the hammer transfers energy to the drill bit or chisel.
The parts list also includes numerous O-rings, resin rings, rubber rings, washers and springs within the impact assembly, making it possible to identify individual components rather than only looking for complete assemblies.
HR3210C Crank and Gear Components
The crank mechanism converts the motor's rotation into the reciprocating movement required by the impact system. The HR3210C parts information includes the 227531-6 spiral bevel gear 37, crank housing components, crankshaft, link arm and counterweights.
If the HR3210C is noisy, vibrating abnormally or appears to have a mechanical fault even though the motor is running, the crank and gear assemblies should be considered. Bearings, gears, shafts and associated components can all be affected by prolonged heavy use.
The 324862-5 counter weights, pipe holders, spring guides and compression springs form part of the vibration and mechanical assembly around the crank mechanism.
HR3210C Motor, Carbon Brushes and Electrical Parts
The HR3210C uses a conventional brushed motor, with separate armature, field, brush holder and carbon brush components. The parts breakdown identifies the 513791-9 armature for 115V and 513793-5 armature for 220–240V, together with 625756-0 field 115V and 625764-1 field 240V.
The 194160-9 carbon brush CB-350 is another important service component, while the 638674-3 brush holder unit and controller assemblies are also listed.
If your HR3210C will not start, is cutting out or is producing excessive sparking, inspect the carbon brushes, brush holders, switch, armature, field and electrical connections. Make sure the replacement electrical components match the voltage of the machine.
HR3210C Switch, Cable and Handle Parts
The rear section of the tool contains the controls and electrical connections required to operate the motor. The parts list includes 651418-4 switch, 451427-1 switch lever, 692637-3 power cord, 682560-0 cord guard, 687169-3 strain relief and 654531-7 terminal block.
If the Makita HR3210C switch is not working, the switch lever and surrounding housing should also be checked. A damaged power cable or cord guard can cause intermittent operation and should be replaced if there is visible damage.
The HR3210C also has a dedicated handle assembly and rear cover, with smaller springs, rubber pins and fixings available within the parts breakdown.
HR3210C Barrel, Seals and Internal Components
The front barrel contains numerous components responsible for guiding and sealing the impact mechanism. The 158533-0 barrel complete is listed alongside the 213656-2 O-ring, 262138-1 urethane ring, 267810-0 flat washers and various internal seals.
If the HR3210C is leaking grease, has developed excessive movement around the front assembly or has suffered damage to the barrel, checking these individual components can help identify the source of the problem.
The extensive selection of O-rings, springs, washers and retaining components in the parts list is particularly useful when carrying out a detailed repair.
Choosing the Correct HR3210C Spare Parts
When searching for Makita HR3210C parts online, check the exact model designation and voltage before ordering. Electrical components are particularly important to match correctly, with separate armature and field references listed for 115V and 220–240V machines.
From the HR3210C SDS-Plus tool holder and impact mechanism to the piston, striker, cylinder, crankshaft, gears, carbon brushes, armature, field, switch, power cord and smaller seals and springs, the parts diagram provides a useful way to identify the component required for your repair.
Matching the original Makita part number is the most reliable way to select the correct HR3210C spare parts from the extensive range of individual components available for this rotary hammer.