Makita HR5001C Parts
1 Compatible Accessory Available!
Enhance your Makita HR5001C with our range of accessories
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 1 | 286250-3 | TOOL HOLDER CAP HR5001C/ |
£1.85 |
|
| 2 | 416568-0 | CHUCK COVER HR5001C | £3.95 |
|
| 3 | 150836-8 | CRANK HOUSING COVER COMP HR500 | £18.25 |
|
| 4 | 233217-2 | COMPRESSION SPRING 51 HR5001C | £1.00 |
|
| 5 | 231984-3 | RING SPRING 25 HR5001C/ |
£1.00 |
|
| 6 | 961232-3 | RETAINING RING WR-45 HR5001C | £1.95 |
|
| 7 | 267735-8 | CUP WASHER 45 HM120C/ |
£3.55 |
|
| 8 | 232180-6 | LEAF SPRING 41 HM1202C/ |
£3.35 |
|
| 9 | 323767-6 | PIN 8 HM1202C/ |
£3.05 |
|
| 10 | 323773-1 | CHUCK RING HR5001C | £46.15 |
|
| 11 | 233218-0 | COMPRESSION SPRING 55 HR5001C | £1.75 |
|
| 12 | 323772-3 | TOOL HOLDER B HR5001C | £76.65 |
|
| 13 | 256265-4 | PIN 10 HR5001C/ |
£2.45 |
|
| 14 | 416572-9 | LOCK SLEEVE A HR5001C | £3.95 |
|
| 15 | 233216-4 | COMPRESSION SPRING 58 HR5001C | £1.95 |
|
| 16 | 416573-7 | LOCK SLEEVE B HR5001C | £3.35 |
|
| 17 | 267180-7 | FLAT WASHER 50 HR5001C | £3.65 |
|
| 18 | 262543-2 | URETHANE SLEEVE 50 HR5001C | £4.65 |
|
| 19 | 267180-7 | FLAT WASHER 50 HR5001C | £3.65 |
|
| 20 | 211751-2 | BALL BEARING 6910 HR5001C | £22.25 |
|
| 21 | 962351-8 | RETAINING RING R-72 | £2.55 |
|
| 22 | 961234-9 | RETAINING RING WR-50 | £1.95 |
|
| 23 | 213618-0 | OIL SEAL 48 HR5001C | £3.35 |
|
| 24 | 213715-2 | O RING 67 HR5001C | £1.00 |
|
| 25 | 416565-6 | SEAL CASE HR5001C | £3.05 |
|
| 26 | 323768-4 | IMPACT BOLT HR5001C | £13.75 |
|
| 27 | 213394-6 | O RING 23 HM1202C/ |
£1.00 |
|
| 28 | 213394-6 | O RING 23 HM1202C/ |
£1.00 |
|
| 29 | 213522-3 | O RING 36 HR5001C | £2.25 |
|
| 30 | 323771-5 | TOOL HOLDER A HR5001C | £44.35 |
|
| 31 | 322908-1 | ROLLER 8 HM1100C/ |
£1.75 |
|
| 32 | 267734-0 | CUP WASHER 37 HR5001C | £1.00 |
|
| 33 | 213431-6 | FLUORIDE RING 28 HM1202C/ |
£10.45 |
|
| 34 | 213431-6 | FLUORIDE RING 28 HM1202C/ |
£10.45 |
|
| 35 | 323817-7 | RING 22 HR5001C | £5.75 |
|
| 36 | 421623-5 | RUBBER RING 24 HR5001C | £6.35 |
|
| 37 | 331530-3 | COLLAR SLEEVE 22 HR5001C | £10.15 |
|
| 38 | 416566-4 | SLIDE SLEEVE HR5001C | £3.35 |
|
| 39 | 331531-1 | RING 45 HR5001C | £8.75 |
|
| 40 | 233215-6 | COMPRESSION SPRING 45 HR5001C | £2.15 |
|
| 41 | 267736-6 | WASHER 45 HR5001C | £2.35 |
|
| 42 | 323769-2 | STRIKER HR5001C | £8.65 |
|
| 43 | 213482-9 | O RING 34 HR5001C | £1.00 |
|
| 44 | 231985-1 | RING SPRING 43 HR5001C/ |
£1.00 |
|
| 45 | 331534-5 | CYLINDER 40 HR5001C | £32.55 |
|
| 46 | 256295-5 | PIN 10 HR5001C | £1.95 |
|
| 46 | 331532-9 | PIPE 10 | £1.50 |
|
| 47 | 213510-0 | O RING 36 AN510/ |
£1.75 |
|
| 48 | 213482-9 | O RING 34 HR5001C | £1.00 |
|
| 49 | 416563-0 | PISTON HR5001C | £4.85 |
|
| 50 | 213459-4 | O RING 32 DA4031/ |
£2.15 |
|
| 50 | 213460-9 | O RING 35 HM1303B/ |
£2.15 |
|
| 51 | 416564-8 | ROD HR5001C | £3.25 |
|
| 52 | 226761-6 | SPIRAL BEVEL GEAR 41 HR5001C | £34.75 |
|
| 53 | 922361-7 | *CAP HD SCREW M6X40 | £1.00 |
|
| 54 | 416561-4 | CRANK CAP HM1304/ |
£3.75 |
|
| 55 | 213510-0 | O RING 36 AN510/ |
£1.75 |
|
| 56 | 150831-8 | CRANK HOUSING COMPLETE HR5001C | £82.30 |
|
| 57 | 323774-9 | CRANK SHAFT HR5001C | £25.65 |
|
| 58 | 267181-5 | 'FLAT WASHER 56 HR5001C | £2.85 |
|
| 59 | 254229-2 | KEY 5 | £1.00 |
|
| 60 | 211470-0 | BALL BEARING 62/ |
£10.65 |
|
| 61 | 254202-2 | KEY 4-10 9401/ |
£1.00 |
|
| 62 | 962303-9 | RETAINING RING R-65 HR5001C | £2.35 |
|
| 63 | 226493-5 | HELICAL GEAR 50 HR5001C | £18.25 |
|
| 64 | 226490-1 | HELICAL GEAR 20A HR5001C | £7.75 |
|
| 65 | 961054-1 | EXT DIN 471 CIRCLIP-14 | £1.00 |
|
| 66 | 961052-5 | EXT DIN 471 CIRCLIP-12 EM2651 | £1.00 |
|
| 67 | 253744-3 | HARD WASHER 12 2414/ |
£1.00 |
|
| 68 | 150835-0 | HELICAL GEAR HR5001C | £6.65 |
|
| 69 | 253744-3 | HARD WASHER 12 2414/ |
£1.00 |
|
| 70 | 421622-7 | SEAL RING HR5001C | £2.25 |
|
| 71 | 150832-6 | GEAR HOUSING COMPLETE HR5001C | £31.35 |
|
| 72 | 211129-9 | BALL BEARING 6201DDW BPJ140/ |
£7.25 |
|
| 72 | 211146-9 | BALL BEARING 6201DDW | £7.20 |
|
| 73 | 213160-1 | OIL SEAL 14 HR3520 | £7.65 |
|
| 74 | 922351-0 | CAP HD SCREW M6X30 8900N/ |
£1.00 |
|
| 75 | 911223-4 | PAN HD SCREW 5X16 W/ |
£1.00 |
|
| 76 | 256286-6 | PIN 7 HR5001C | £1.00 |
|
| 77 | 210024-0 | BALL BEARING 608 2RS HR5001C | £2.85 |
|
| 78 | 322951-0 | CHANGE KEY HR4000C/ |
£4.25 |
|
| 79 | 253314-8 | THIN WASHER 15 HR3000C/ |
£1.00 |
|
| 80 | 416571-1 | CHANGE LINK HR5001C | £3.15 |
|
| 81 | 253810-6 | THIN WASHER 12 HR4000C/ |
£1.75 |
|
| 82 | 256263-8 | PIN 5 HR5001C | £1.00 |
|
| 83 | 322963-3 | GUIDE PIN 2 HR4000C/ |
£1.00 |
|
| 84 | 233180-9 | *COMPRESSION SPRING 3 | £1.00 |
|
| 85 | 416289-4 | SLIDE PLATE HR4000C/ |
£1.00 |
|
| 86 | 961052-5 | EXT DIN 471 CIRCLIP-12 EM2651 | £1.00 |
|
| 87 | 267113-2 | BLUE WASHER 12 HR4000C | £1.00 |
|
| 88 | 150986-9 | TORQUE LIMITER COMPLETE | £73.35 |
|
| 89 | 267113-2 | BLUE WASHER 12 HR4000C | £1.00 |
|
| 90 | 211109-5 | BALL BEARING 6201 HM1400K/ |
£5.35 |
|
| 91 | 226760-8 | SPIRAL BEVEL GEAR 12 HR5001C | £17.15 |
|
| 92 | 256122-6 | PIN 4 HR4000C/ |
£1.00 |
|
| 93 | 323973-3 | CRANK PIN 4 HR5001C | £2.25 |
|
| 94 | 213304-3 | O RING 20 VC3211M/ |
£1.00 |
|
| 95 | 416287-8 | CHANGE LEVER HR4000C/ |
£1.95 |
|
| 96 | 816329-2 | INDICATION LABEL HR3000C/ |
£1.00 |
|
| 97 | 233188-3 | COMPRESSION SPRING 2 | £1.00 |
|
| 98 | 416286-0 | *LOCK BUTTON HR4000C | £1.00 |
|
| 98 | 417340-3 | LOCK BUTTON HR4000C/ |
£1.00 |
|
| 99 | 416577-9 | *HANDLE COVER HR5001C | £13.75 |
|
| 99 | 417167-1 | HANDLE COVER HR5001C | £15.95 |
|
| 100 | 265995-6 | TAPPING SCREW 4X18 | £1.00 |
|
| 101 | 265995-6 | TAPPING SCREW 4X18 | £1.00 |
|
| 102 | 687052-4 | STRAIN RELIEF HS7100/ |
£1.00 |
|
| 102 | 687053-2 | STRAIN RELIEF 110V UK360/ |
£1.00 |
|
| 102 | 687063-9 | STRAIN RELIEF UH4570/ |
£1.00 |
|
| 103 | 922353-6 | CAP HD SCREW M6X30 HM1810 | £1.00 |
|
| 103 | 922351-0 | CAP HD SCREW M6X30 8900N/ |
£1.00 |
|
| 104 | 416126-2 | LEAD GUIDE HR3000C/ |
£1.75 |
|
| 105 | 421583-1 | SPONGE SHEET HR3000C/ |
£1.00 |
|
| 106 | 651922-3 | SWITCH TG71B PC5000/ |
£11.15 |
|
| 107 | 416284-4 | SWITCH LEVER HR4000C/ |
£1.75 |
|
| 108 | 416576-1 | *HANDLE HR5001C | £18.85 |
|
| 108 | 417166-3 | HANDLE HR5001C | £22.25 |
|
| 109 | 682506-6 | CORD GUARD 12-90 110V 9029 | £1.75 |
|
| 109 | 682540-6 | CORD GUARD HS6100/ |
£1.00 |
|
| 109 | 682560-0 | CORD GUARD 10 HM1317C/ |
£2.25 |
|
| 109 | 682561-8 | CORD GUARD 11.5 HM1202C 9069S | £1.75 |
|
| 110 | 695237-8 | POWER SUPPLY CORD PC5000/ |
£23.45 |
|
| 110 | 692541-6 | POWER SUPPLY CORD 1.00-2-5.0 | £19.85 |
|
| 110 | 665726-7 | Price on application | £0.00 |
|
| 111 | 416285-2 | ACRYLIC PIN 5 HR4000C/ |
£1.00 |
|
| 112 | 265995-6 | TAPPING SCREW 4X18 | £1.00 |
|
| 113 | 416562-2 | 'FIX ROD HR5001C | £1.75 |
|
| 114 | 240016-5 | FAN 90 | £6.35 |
|
| 115 | 253165-9 | WASHER 8 6904/ |
£1.00 |
|
| 116 | 931402-8 | HEX FULLNUT M8 LS1013/ |
£1.00 |
|
| 117 | 416570-3 | REAR COVER HR5001C | £7.95 |
|
| 118 | 266021-4 | PT SCREW 5X20 HM1303 | £1.00 |
|
| 119 | 265995-6 | TAPPING SCREW 4X18 | £1.00 |
|
| 120 | 416292-5 | BRUSH HOLDER CUTTER HR4000C | £1.00 |
|
| 121 | 263002-9 | RUBBER PIN 4 GA7050/ |
£1.00 |
|
| 122 | 643650-4 | BRUSH HOLDER CAP CB-5/ |
£1.00 |
|
| 123 | 181048-2 | CARBON BRUSH CB-155 (TIB143) Pair | £8.45 |
|
| 124 | 859584-3 | NAME PLATE HR5001C | £1.00 |
|
| 125 | 911223-4 | PAN HD SCREW 5X16 W/ |
£1.00 |
|
| 126 | 416575-3 | GEAR HOUSING COVER HR5001C | £6.25 |
|
| 127 | 266095-5 | TAPP SCREW 5X55 UC3530A/ |
£1.00 |
|
| 128 | 416569-8 | BAFFLE PLATE HR5001C | £3.35 |
|
| 129 | 516775-6 | ARMATURE ASSY 110V HR5001C | £81.20 |
|
| 129 | 516778-0 | ARMATURE ASSY 240V HR5001C | £82.30 |
|
| 130 | 626075-7 | FIELD 110V HR5001C | £25.65 |
|
| 130 | 626078-1 | FIELD 240V HR5001C | £24.55 |
|
| 131 | 416567-2 | DUST GUIDE HR5001C | £2.45 |
|
| 132 | 681642-5 | INSULATION WASHER HM1317C-CB/ |
£7.65 |
|
| 133 | 211088-7 | BALL BEARING 6000DDW | £4.55 |
|
| 134 | 150833-4 | MOTOR HOUSING COMPLETE HR5001C | £40.95 |
|
| 135 | 631272-2 | CONTROLLER 110VHM1202C HR5001C | £63.05 |
|
| 135 | 631273-0 | CONTROLLER 240vHM1202C/ |
£46.15 |
|
| 136 | 265439-6 | HEX HD BOLT M8X150 | £2.15 |
|
| 137 | 417003-1 | SIDE HANDLE HM1202C/ |
£8.65 |
|
| 137 | 416009-6 | *SIDE HANDLE HM1100C | £14.85 |
|
| 138 | 252640-2 | WING NUT M8 HM1100C/ |
£6.55 |
|
| 139 | 416574-5 | SIDE HANDLE BASE 87 | £0.00 |
|
| 140 | 416574-5 | SIDE HANDLE BASE 87 | £0.00 |
|
| 141 | 151549-4 | SIDE HANDLE 87 COMP HR5000C | £11.65 |
|
| 141 | 344634-2 | HANDLE SPRING | £10.20 |
|
| 143 | 417002-3 | SIDE HANDLE CAM HM1202C/ |
£1.75 |
|
| 1001 | 152554-4 | *GRIP 36 COMP HR3000/ |
£8.45 |
|
| 1002 | 265701-9 | WING SCREW M6X14 HS7611 | £2.45 |
|
| 1003 | 266163-4 | CUP SQUARE NECK BOLT M6x80 | £2.85 |
|
| 1004 | 344492-6 | PLATE HR3000C/ |
£1.00 |
|
| 1005 | 344635-0 | GRIP SPRING 87 HR5001C | £14.85 |
|
| 1006 | 416580-0 | SIDE GRIP BASE HR5001C | £8.65 |
|
| 1007 | 931302-2 | HEX FULL NUT M6 LF1000/ |
£1.00 |
|
| 1008 | 824519-3 | PLASTIC CARRYING CASE | £74.32 |
|
| 1009 | 181573-3 | GREASE VESSEL 93G | £5.24 |
|
| 1009 | 194683-7 | Grease vessel set, 100 ml | £7.60 |
|
| 2002 | 134882-9 | *SIDE HANDLE ASSY HR5001C | £30.25 |
|
| 2002 | 134945-1 | SIDE HANDLE ASSY HR5001C | £26.70 |
|
| 5001 | 655030-2 | PLUG UK TYPE 16A-4H/ |
£8.34 |
|
| 5002 | 654091-9 | NON INSULATED TERMINAL GD0801 | £1.00 |
|
The Makita HR5001C is a heavy-duty 50mm SDS-Max rotary hammer designed for demanding drilling, chiselling and demolition work. Its large impact mechanism contains a substantial number of individual mechanical components, from the tool holder and impact bolt through to the crankshaft, gears, piston and bearings.
If your Makita HR5001C is not working, has lost impact power, is making unusual noises or has developed excessive movement around the tool holder, the individual Makita HR5001C spare parts can help identify the components involved in the repair.
Makita HR5001C Parts Diagram and Parts List
The HR5001C parts diagram above provides a detailed breakdown of the rotary hammer, covering the front tool holder, impact mechanism, crank assembly, motor and electrical system. There are around 140 individual positions in the parts breakdown, including many small springs, pins, washers, seals and retaining rings.
The diagram is particularly useful when dismantling an older HR5001C because several of the internal components look similar but have specific positions within the hammer mechanism.
HR5001C Tool Holder and SDS-Max Parts
The tool holder is exposed to considerable impact and vibration during heavy chiselling and drilling. The HR5001C parts list includes the 286250-3 tool holder cap, 416568-0 chuck cover, 323773-1 chuck ring, 323772-3 tool holder B, 416572-9 lock sleeve A and 416573-7 lock sleeve B.
Other components include compression springs, pins, washers, retaining rings and the 323771-5 tool holder A.
If the HR5001C tool holder is loose, is difficult to change accessories or is no longer holding an SDS-Max bit securely, the individual retaining and locking components should be checked as well as the main holder.
HR5001C Impact Mechanism Parts
The impact mechanism generates the force required for heavy drilling and chiselling. Inside the barrel are the impact bolt, tool holder components, seals, O-rings and other parts that work together to transfer the hammering action to the accessory.
The parts list includes the 323768-4 impact bolt, 416565-6 seal case, 213618-0 oil seal 48, 213715-2 O-ring 67, 213522-3 O-ring 36 and several rubber rings and smaller sealing components.
If your Makita HR5001C has lost impact power, the impact mechanism and its seals are worth investigating. Worn or damaged components within this assembly can affect the hammering action even when the motor itself is running normally.
HR5001C Piston, Cylinder and Crankshaft Parts
The internal crank and piston assembly converts the motor's rotation into the reciprocating movement required for the impact mechanism. The parts breakdown includes the 323774-9 crankshaft, together with bearings, keys, retaining rings and the associated helical gears.
The crankshaft works with components including the 226493-5 helical gear 50, 226490-1 helical gear 20A, 150835-0 helical gear and 211470-0 ball bearing.
If the HR5001C is making unusual mechanical noises, developing excessive vibration or showing problems with its impact cycle, the crankshaft, gears, bearings and associated seals should be considered during inspection.
HR5001C Gear and Bearing Parts
The gear assembly contains several bearings and precision-machined components supporting the drive and impact mechanism. The parts list includes 211751-2 ball bearing 6910, 210024-0 ball bearing 608LLU and other bearings used throughout the machine.
Retaining rings, flat washers, keys and oil seals are also listed individually. These smaller HR5001C parts can be important when rebuilding the hammer after replacing a bearing or gear.
A noisy gearbox, excessive shaft movement or unusual vibration can justify checking the bearings and gears rather than assuming the motor is responsible.
HR5001C Armature, Field and Motor Parts
The HR5001C uses a conventional brushed electric motor, with separate armature, field and brush-holder components. The motor housing assembly incorporates components including the brush holder and lead unit, while the parts information also identifies the controller.
If the HR5001C is losing power, running intermittently or producing excessive sparking, the armature, field and carbon brushes should be inspected. The correct electrical components must be matched to the voltage version of the machine.
The motor section also contains bearings, insulation washers and other supporting parts that can be replaced individually where listed.
HR5001C Switch, Controller and Electrical Parts
A fault in the electrical system can prevent the hammer from starting even when the impact mechanism is mechanically sound. The HR5001C parts information includes the 631274-8 controller, switch and associated electrical connections, as well as the motor housing and lead components.
If your Makita HR5001C will not start, cuts out during operation or behaves intermittently, the switch, controller, cable connections and motor components should be checked. Disconnect the machine from the mains before carrying out any inspection or repair.
HR5001C Side Handle and Housing Parts
The large side handle provides additional control when operating the HR5001C during heavy drilling and chiselling. The parts breakdown includes the 151549-4 side handle 87 complete, 416580-0 side grip base 87, grip, handle spring, plate, wing nut and associated fasteners.
The 150833-4 motor housing complete and crank housing components are also identified within the parts list, along with numerous screws, bolts, pins and smaller fittings.
Identifying the Correct Makita HR5001C Parts
When searching for Makita HR5001C parts online, use the model number together with the part number wherever possible. This is particularly useful with the HR5001C because its parts list contains a large number of small components that form part of the tool holder, impact and crank assemblies.
From HR5001C tool holder parts and impact bolts to pistons, crankshafts, gears, bearings, armatures, fields, controllers, switches and side-handle components, the parts diagram provides a detailed reference for identifying the correct Makita HR5001C replacement parts.
Accessories for Makita HR5001C
This model also has 1 accessories available.
Scroll down to view them.