Skip to main content

Makita RBC2110 Parts

Drawings
*HANDLE SET RBC2110
£11.05
*HANDLE SET DBC260L/RBL2510/
£14.35
*SCREW DBC260L/RBC281/MS2810
£1.95
NUT M5 RBC230/260/310/2810
£1.20
CONTROL LEVER ASSY FOR TZ9V-2G
£64.25
CONTROL LEVER ASSY 2L RBC2110
£49.95
*ANGER ASSY RBC260L/U/RBC201/
£7.85
*SCREW & WASHER ASSY DBC260L/U
£1.40
*SPACER DBC260L/RBC201/MS20C/
£4.55
*SHAFT PIPE COMPLETE RBC2110
£109.65
*CAUTION LABEL RBC2110
£8.95
*PROTECTOR ASSY RBC2110
£45.05
PROTECTOR ASSY RBC2110
£51.15
*PROTECTOR ASSY EM4251/RBC225
£21.15
PROTECTOR ASSY EM4251/RBC225
£0.00 Not Available
*BOLT/CROSS RECESS M6X23
£2.80
*BOLT M6X30 RBC3101
£2.80
*PROTECTOR CLAMP EM4251/RBC22
£4.85
SCREW ASSY M5x40 DBC260L/U
£8.20
PROTECTOR COMPLETE
£0.00 Not Available
*NUT M5 DBC260L/U/RBC3101
£6.20
SOCKET HD BOLT M5X14 DBC260L
£1.50
*SHAFT RBC260L/U/RBC225/221
£32.55
*GEAR CASE RBC260L/U/RBC2110
£95.80
*GEAR CASE RBC2110
£64.25
*INNER SNAP RING DBC260L/U/RB
£1.00
*OUTER SNAP RING RBC260L/U/RB
£3.25
*BALL BEARING 609ZZ RBC260L/U
£10.65
*SOCKET HEAD BOLT M5X25 DBC26
£1.00
*OIL BOLT M6X9 RBC260L/U/RBC2
£3.25
*GUARD RBC260L/U/RBC230/260/R
£6.65
*SCREW ASSY M5x12 DBC260L/U
£1.00
*BALL BEARING 626ZZ DBC260L/U
£8.60
*BALL BEARING 6000DDU DBC260L
£10.30
*INNER SNAP RING DBC260L/U/RB
£1.00
*RECEIVE WASHER RBC260L/U/RBC
£26.25
*CLAMP COMPL WASHER RBC260L/U
£10.95
*NUT SPRING WASHER RBC260L/U/
£2.05
*CUTTER SHAFT SET RBC260L/U/R
£49.45
*SPACER GASKET RBC230/260/320
£1.00 Not Available
*SCREW M5X25 RBC221/PB250/HTR
£1.00
*INSULATOR COMPL RBC230/RBC20
£6.65
*WIRE RBC201/MS20C/MS3200E/RB
£1.85
*GASKET-INSULATOR RBC201/MS20C
£1.75
GASKET-INSULATOR RBC201/MS20C
£2.15
*SOCKET HD BOLT M5X20 DBC260L
£1.50
*COVER-PLUG CAP RBC201/MS20C
£2.15
*SPARK PLUG DBC260L/U/RBC351/
£12.20
*CYLINDER HTR4900/RBC2110
£66.55
*CYLINDER HD COVER RBC2110
£25.05
'LABEL TRADE MARK RBC201/RBC31
£3.85
*PT SCREW M5x14 RST200/RBC2110
£2.10
*PLUG CAP RST200/PTR2500/RBC21
£4.30
*PLUG CAP SPRING EH7500/EPH1
£1.50
*TUBE RBC2110
£1.70
*WIRE COMP RBC2110
£2.55
*SCREW ASSY M4X16 RBC201/2110
£1.50
*IGINITION COIL RBC201/RST200/
£84.70
*SOCKET HD BOLT M5 EPH1000/RBC
£2.60
*MUFFLER-EXHAUST RBC201/MS20C
£26.25
'SPARK ARRESTER RBC201/MS20C
£4.65
*INSULATOR MUFFLER RST200
£3.15
*CYLINDER GASKET RBC201/MS20C
£2.45
*PISTON RING HTR4900/RBC2110
£4.35
*CLIP RBC221/EM4251/MH2556/RS
£1.00
*PISTON HTR4900/RBC2110
£19.45
*PISTON PIN RBC201/MS20C/RBC21
£3.25
*CRANKSHAFT COMP RBC201/MS20C
£106.15
*CRANKSHAFT COMP RBC2110
£109.65
*SET SCREW EH7500/RBC201/MS2
£3.05
*SWING ARM RBC201/MS20C/EM42
£1.00
*COLLAR RBC201/MS20C/EM4251
£1.00
*REEL RBC201/MS20C/HTR5600
£4.85
*SPIRAL SPRING RBC201/MS20C
£8.65
*SCREW ASSY M4X16 RBC201/2110
£1.50
*HANDLE EH7500/MH2556/EH561
£4.85
LABEL RBC2110
£5.35
*STARTER ROPE RBC201/MS20C/HTR
£7.05
*PULLEY EM4251/RBC201/MS20C
£2.25
'CRANKCASE ASSY RST200/RBC2110
£85.70
*OIL SEAL RBC201/RBC2110
£3.40
*GASKET CRANKCASE RBC201/MS20C
£9.95
*BALL BEARING 6000 EH7500/260
£7.60
*SCREW M5X25 EH561/MH2556/HTR
£1.00
*FLYWHEEL RBC201/MS20C/RST200
£56.85
CLUTCH RBC201/MS20C
£21.15
CLUTCH DRUM COMP RBC201/MS20C
£0.00 Not Available
*CLUTCH CASE COMP RBC201/MS20C
£25.65
*OUTER SNAP RING 10 RBK410
£1.10
*SOCKET HEAD BOLT M5X25 RBC310
£1.40
*DAMPER PIPE RBC201/2110/MS20C
£2.35
*PIPE BRACKET COMP RBC201/MS20
£6.25
*CLAMP RBC525/MS20C/EM4251/43
£2.90
*PT SCREW M5x20 RST200/RBC2110
£1.10
*SOCKET HD BOLT RBC201/MS20C
£3.90
*CAP, FUEL TANK ASSY RBC350E
£9.85
*FUEL TANK CAP COMP MS221/PB2
£6.25
*STRAP UNIT DBC260L/U/EPH1000
£5.75
*FUEL TANK RBC201/RBC2110
£19.45
TUBE RBC201/MS20C
£8.30
*TUBE RBC2110
£5.60
*HOSE CLAMP EH7500/EPH1000
£1.00
*FILTER DBC260L/U/EPH1000/RBC
£7.25
*PLATE EPH1000/RBC230/320E/MH
£2.15
*PLATE EPH1000/RBC230/EM4251/
£2.15
*PLATE -MUFFLER RBC2110/20MS20
£3.95
*DAMPER RBC230/320E/MS3200E/M
£1.00
*CARBURETOR TZ9V-2G RBC201
£102.85
CARBURETOR TZ9V-2L RBC2110
£64.25 Not Available
*ADJUST SCREW RBC201/RBC2110
£14.35
STAY 2L RBC2110/RST210/LT210
£6.65
*SCREW RBC201/RBC2110
£2.85
SCREW 2L RBC2110/RST210/LT210
£6.75
*LEVER END RBC201/RBC2110
£14.85
*WASHER RBC201/RBC2110
£2.85
*STARTER LEVER RBC201/RBC2110
£4.35
*STARTER SPRING RBC201/2110
£3.05
*SLOW STOP SCREW RBC201/2110
£5.35
*E-RING RBC201/RBC2110
£1.00
*O RING RBC201/RBC2110
£6.15
*O RING RBC201/RBC2110
£3.95
*MAIN JET RBC201/RBC2110
£16.65
*O RING RBC201/RBC2110
£4.25
*CHECK VALVE ASSY RBC201
£11.75
*GUIDE PLATE RBC201/RBC2110
£6.15
*SCREW RBC201/RBC2110
£1.00
*DIAPHRAGM ASSY RBC201/RBC2110
£21.15
*DIAPHRAGM COVER RBC201/RBC211
£40.95
*SCREW RBC201/RBC2110
£1.00
*PUMP PACKING RBC201/RBC2110
£3.35
*PUMP DIAPHRAGM RBC201/RBC2110
£9.35
*PUMP PLATE RBC201/RBC2110
£4.55
*FILTER RBC201/RBC2110
£4.85
*PUMP PACKING RBC201/RBC2110
£3.35
*PUMP COVER RBC201/RBC2110
£7.85
*COMBINATION VALVE RBC201
£13.15
*PRIMING PUMP RBC201/RBC2110
£5.35
*PRIMING PUM PLATE RBC201/2110
£10.75
*SCREW RBC201/RBC2110
£1.00 Not Available
*O RING RBC201/RST200/2110
£3.55
*PLATE/AIR CLEANER ASSY RBC201
£15.45
*PAN HEAD SCREW M5X60 RBC230
£1.10
*ELEMENT/AIR CLEANER RBC201
£4.85
*CASE/AIR CLEANER RBC201/2110
£8.85
*SCREW ASSY M5X14 EPH1000/RBC
£1.40
*REWIND STARTER RST200
£26.25
135 808723-2
LABEL/CAUTION EM2651LHEBH253
£1.00
136 413143-3
WASHER BUR360/EM2651LH/EBH253
£1.00

The Makita RBC2110 is a 21cc two-stroke straight-shaft petrol line trimmer with a loop handle and solid steel drive shaft. Designed around a lightweight 0.62kW engine, diaphragm carburettor and nylon cutting head, it is a straightforward machine mechanically but contains a range of serviceable components that can wear through regular use.

If your Makita RBC2110 is not starting, is running poorly, has lost power, will not keep running or has developed a problem with the shaft, clutch or cutting head, the correct Makita RBC2110 spare parts can help identify the faulty component.

Makita RBC2110 Parts Diagram and Parts List

The RBC2110 parts diagram covers the machine in several assemblies, including the handle and controls, shaft and gear case, clutch, crankcase, fuel system, carburettor and starter.

The parts list includes the handle set, control lever, throttle cable, hanger, protector, shaft, gear case, clutch drum, flywheel, fuel tank, rewind starter, ignition coil, air cleaner, carburettor and numerous smaller springs, seals, screws and washers.

There are also Type 1 and Type 2 parts listings for the RBC2110, so checking the exact version before ordering is important where components have changed.

RBC2110 Carburettor and Fuel System Parts

Fuel-system problems are one area to investigate when a Makita RBC2110 is hard to start, will not idle correctly or cuts out when the throttle is opened. The machine uses a diaphragm-type carburettor, with separate components available for the carburettor and its fuel system.

The parts breakdown identifies carburettor assemblies including 5196036000 and 5196043000, along with components such as the main jet, adjust screw, check valve assembly, pump cover, primer pump plate and O-ring.

If the engine is receiving fuel but refuses to run correctly, the carburettor, fuel filter, fuel lines and associated sealing components are worth checking. A blocked filter or deteriorated fuel-system component can also affect fuel delivery.

Makita RBC2110 Engine and Starting Parts

The 21cc two-stroke engine uses a rewind starter, electronic ignition and conventional spark plug. The starter and ignition assemblies contain several individual components that can be replaced when starting problems develop.

The parts information includes the starter assembly, starter rope, starter knob, ignition coil, spark plug and flywheel, together with engine seals, gaskets and crankcase components.

If the RBC2110 will not start, the spark plug, ignition system and recoil starter are useful areas to investigate alongside fuel delivery. A starter that pulls correctly but produces no ignition requires a different diagnosis from one where the recoil mechanism itself has become damaged.

RBC2110 Clutch and Drive Shaft Parts

The clutch transfers engine power into the long drive shaft, which runs down to the gear case and cutting head. The parts breakdown includes the clutch, clutch drum, clutch case, flywheel, pipe damper, pipe bracket and shaft components.

The 324893-4 shaft is identified in the parts information for the RBC2110, while the clutch assembly and drum are also listed separately.

If the engine runs but the RBC2110 cutting head is not turning, the clutch, drive shaft and gear case are worth checking. Excessive vibration or unusual mechanical noise can also point towards wear in the shaft or drive components.

RBC2110 Gear Case and Trimmer Head Parts

At the lower end of the shaft, the gear case transfers rotation to the nylon cutting head. The parts breakdown identifies the gear case assembly, bearings, shafts, retaining rings and related components.

The RBC2110 was designed for nylon line trimming, and Makita's documentation specifically warns against using a metal blade on this model. If the cutting head is damaged or the lower drive assembly has developed excessive movement, the relevant gear-case and head components should be checked against the correct parts list.

RBC2110 Protector, Handle and Control Parts

The loop handle, control lever and protector are exposed to regular handling and vibration during trimming. Replacement RBC2110 parts include the handle assembly, control lever, hanger, control cable, protector assembly and protector clamp.

The parts catalogue lists 6195026000 control lever assembly, while 6214017000 handle set is also identified for the RBC2110. The protector assembly and mounting hardware are separately available in the parts breakdown.

If the throttle feels stiff, the control lever is damaged or the cutting guard has been broken, these components can be inspected individually rather than assuming an engine fault.

RBC2110 Air Filter, Exhaust and Small Engine Parts

The air cleaner and exhaust system also contain replaceable components. The RBC2110 parts information includes the air cleaner plate, air filter components, insulator, exhaust pipe and muffler-related parts.

Restricted air intake can affect engine performance, while damage around the exhaust or insulator can create other running problems. The parts list also includes numerous small engine components such as gaskets, O-rings, washers, screws and retaining rings.

These smaller Makita RBC2110 replacement parts can be particularly important when an older trimmer is being dismantled for servicing.

Finding the Correct Makita RBC2110 Parts

When searching for Makita RBC2110 parts online, check the model and Type number before ordering, particularly for engine, carburettor and shaft components. The RBC2110 has several detailed assemblies, and similar-looking parts can have different part numbers.

From RBC2110 carburettor parts and fuel-system components to the ignition coil, recoil starter, clutch, drive shaft, gear case, cutting head, protector, control lever and handle, the parts information makes it easier to identify the component required for a particular repair.

Matching the original part number to the correct diagram is the best approach when selecting Makita RBC2110 spare parts or Makita RBC2110 replacement parts.