RP0900 Spares and Parts for MAKITA RP0900 (WOODWORKING)

Ref:	Part Number:	Description	Price
1	251878-6	WING SCREW M5X20 MT361/RP09/K	£1.00
2	941101-4	FLAT WASHER 5 DIN125-B RP0900	£1.00
3	346007-5	PRESSURE PLATE RP0900/MT361	£1.00
4	424156-9	RUBBER CAP RP0900	£1.00
5	252094-3	VERY SPECIAL NUT MT361/RP0900	£2.20
6	816924-8	SCALE LABEL RP0900	£1.00
6	816925-6	*SCALE LABEL RP0900	£1.00
7	321948-6	STOPPER POLE MT361/RP0900/362	£1.00
8	451035-8	DEPTH POINTER MT361/RP0900	£1.00
9	188696-8	HOUSING SET RP0900	£31.80
9	188696-8	HOUSING SET RP0900	£31.80
10	450820-6	CHIP DEFLECTOR RP0900/M3601	£1.00
11	181410-1	*CARBON BRUSH CB-106 RP0900	£4.80
12	643601-7	BRUSH HOLDER CB-16 RP0900	£2.10
13	931202-6	HEX FULL NUT M5 RP0900/AN510	£1.00
14	443073-4	FELT RP0900/3620/M3601	£1.00
15	692527-0	LEAD WIRE HS7100/GD0801C/HP16	£21.10
15	665918-8	POWER SUPPLY CORD 1.0-2-2.5	£8.40
16	682504-0	CORD GUARD HP1641/BO5031/HP16	£2.30
17	443074-2	FELT RP0900/3620/M3601	£1.00
18	687124-5	STRAIN RELIEF M9001/DVC/RP0900	£1.00
20	651280-7	SWITCH SGE115CDY-5 RP0900/3620	£6.70
21	654532-5	TERMINAL BLOCK HS7100/KP0800	£3.10
22	645200-1	NOISE SUPPRESSOR	£3.00
23	594591-6	FIELD 110V RP0900/M3601	£19.90
23	594594-0	FIELD 240V RP0900	£20.50
24	210044-4	BALL BEARING 608DDW MT431/PC5	£1.00
25	513776-5	ARMATURE 110V RP0900	£32.50
25	513779-9	ARMATURE 240V RP0900	£32.50
26	241835-2	*FAN 72 RP0900	£6.40
26	240123-4	FAN 72 RP0900/M3601	£2.80
27	267114-0	BLUE WASHER 17 RP0900/8412DWH	£1.00
28	211278-2	BALL BEARING 6203DDW RP0900/9	£7.30
29	763619-3	COLLET CONE RP0900/3608B/3620	£4.54
30	763615-1	COLLET NUT RP0900/3608B/3620	£3.86
31	266326-2	TAPPING SCREW M4X18 EBH253/EB3	£1.00
31	266326-2	TAPPING SCREW M4X18 EBH253/EB3	£1.00
33	233110-0	COMPRESSION SPRING 8 RP0900/H	£1.00
34	941202-8	FLAT WASHER 8 DIN125-A RP0900	£1.00
35	266460-8	*SET BOLT M8 MT361	£1.80
36	450821-4	LEVER RP0900/M3601	£1.00
37	911213-7	PAN HEAD SCREW M5X12 ER2550	£1.00
38	866313-7	NAME PLATE RP0900	£1.00
39	962065-9	INTERNAL INVERTED RING-15 RP0	£1.00
40	267047-9	NARROW WASHER 10 RP0900/6905D	£1.00
41	415992-4	PIN 10 RP0900/3620	£1.00
41	451524-3	PIN 10 MT361/M3601	£1.00
42	231416-0	COMPRESSION SPRING 10 MT361/R	£1.00
43	251447-3	SLOT HD SHOULDER SCREW M6 36	£1.00
45	265586-3	+ HEX BOLT M5X14 RP0900/1801	£1.00
46	265587-1	+ HEX BOLT M5X20 RP0900/1801	£1.00
46	265587-1	+ HEX BOLT M5X20 RP0900/1801	£1.00
47	135264-8	STOPPER ASSY RP0900/M3601	£3.60
48	216022-2	STEEL BALL 7.0 M3601/M8701	£1.00
49	231419-4	COMPRESSION SPRING 5 RP0900/M	£1.00
50	256651-9	PIN 10 RP0900/M362/3620/M3601	£1.00
51	231417-8	COMPRESSION SPRING 10 MT361/R	£1.00
52	265761-1	THUMB SCREW M5X16 RP0900/M3601	£1.00
53	231240-1	COMPRESSION SPRING 7 RP0900/	£1.00
54	158808-7	BASE COMP RP0900/MT361/M3601	£20.50
55	259019-8	SELF LOCK 15 RP0900/M362/3620	£1.00
56	450819-1	BASE PLATE RP0900	£4.50
57	912112-6	COUNTERSUNK SCREW M4X10 RP090	£1.00
58	911206-4	PAN HD SCREW M5X10 W/SP WASHE	£1.00
1001	164834-6	STRAIGHT GUIDE MT361/RP0900	£15.72
1002	781006-4	Price on application	£3.86
1003	781011-1	Price on application	£4.68
1004	763637-1	COLLET CONE 1/4" RP0900/M362	£10.16
1005	194733-8	DUST NOZZLE SET MT361/RP0900	£3.98
1006	824880-8	PLASTIC CARRYING CASE	£30.84
1006	821550-0	STACKING CASE TYPE 2 157MM	£60.34
1007	D-30215	ROUTER BIT 3PCS/SET INCH	£63.70
1008	837646-7	INNER TRAY	£11.74
1009	801F25-1	RP0900XJ INDICATION LABEL	£0.00	Contact Us
1010	801F26-9	RP0900XJ PLASTIC CASE LABEL	£0.00	Contact Us
5001	655030-2	PLUG UK TYPE 16A-4H/110V	£8.34
5002	654091-9	NON INSULATED TERMINAL GD0801	£1.00

Accessories for Makita RP0900

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £10.50

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £13.73

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £8.82

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:

Price: £11.00

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:

Price: £11.00

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £13.01

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:

Price: £16.57

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £12.69

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:

Price: £14.90

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:

Price: £14.06

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:

Price: £14.90

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:

Price: £14.90

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £23.19

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:

Price: £27.60

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £32.01

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:

Price: £16.15

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

Price: £17.09

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:

Price: £33.60

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:

Price: £13.73

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

Price: £26.44

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

Price: £27.71

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:

Price: £20.97

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £17.63

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £15.95

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:

Price: £16.57

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:

Price: £19.31

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

Price: £26.44

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:

Price: £38.02

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:

Price: £23.19

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:

Price: £43.05

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:

Price: £36.95

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £39.17

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £28.36

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £42.41

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:

Price: £22.56

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

Price: £17.30

Buy Replacement Parts and Accessories for the Makita RP0900

39 Compatible Accessories Available!

Accessories for Makita RP0900

Contact Info

Secure Shopping

Our Service

Help And Advice

Your Account

Recently Viewed