RP0910 Spares and Parts for MAKITA RP0910 (WOODWORKING)

Ref:	Part Number:	Description	Price
1	252643-6	WING NUT M10 RP910/1100C	£1.00
2	410129-8	NYLON NUT M10 RP1100C/3612BR	£1.00
3	417320-9	'SILENT POLE RP910/1100C	£1.50
4	233287-1	'COMPRESSION SPRING 13 RP1100C	£1.90
5	265739-4	THUMB SCREW M10X90 RP1100C	£9.80
6	417247-3	'DEPTH PIONTER RP910/1100C	£1.00
7	265995-6	TAPPING SCREW 4X18	£1.00
8	417239-2	REAR COVER RP910/1100C	£3.50
10	152618-4	MOTOR HOUSING COMP RP910/1100C	£19.90
11	852318-3	'NAME PLATE RP0910	£1.00
12	654531-7	TERMINAL BLOCK 2P UH45/55/65	£2.10
13	645253-0	NOISE SUPPRESSOR 110V	£3.90
15	682559-5	STRAIN RELIEF	£1.00
15	682566-8	CORD GUARD 10 GD0801C/GD0811C	£1.00
16	663543-9	Price on application	£0.00	Contact Us
16	663934-4	POWER CORD 1.00-2-4.0	£11.60
16	692043-2	Price on application	£14.60
16	692502-6	POWER SUPPLY CORD 1.0-2-4.0	£11.30
16	665940-5	POWER SUPPLY CORD 1.0-2-4.0	£9.00
17	687052-4	STRAIN RELIEF HS7100/BO5041	£1.00
17	687053-2	STRAIN RELIEF 110V UK360/HS61	£1.00
17	687063-9	STRAIN RELIEF UH4570/55/5580/	£1.00
18	265995-6	TAPPING SCREW 4X18	£1.00
19	638001-4	'SUPPORT COMP RP0910	£3.50
20	634366-2	'FIELD ASSY 110V RP0910	£12.00
20	634368-8	FIELD ASSY 240V RP0910	£12.00
21	266095-5	TAPP SCREW 5X55 UC3530A/KP0810	£1.00
22	210005-4	BALL BEARING 608DDW GA5020	£6.10
23	681651-4	'INSULATION WASHER HM1130	£1.00
24	516401-7	'ARMATURE ASSY 110V RP0910	£56.20
24	516403-3	ARMATURE ASSY 240V RP0910	£56.20
25	240034-3	FAN 70	£3.20
26	413078-8	BAFFLE PLATE P1100C/0910	£1.00
27	251295-0	COUNTERSUNK HEAD SCREW M4X14	£1.00
28	285657-0	BEARING RETAINER 50 3612BR/RP1	£1.00
29	267114-0	BLUE WASHER 17 RP0900/8412DWH	£1.00
30	211278-2	BALL BEARING 6203DDW RP0900/9	£7.30
31	417251-2	KNOB COVER R RP0910/1110C	£4.50
32	417256-2	'NOZZLE JOINT RP0910/1110C	£1.00
33	266034-5	CT SCREW M4X16 HS6100/DLS714	£1.00
34	417250-4	KNOB R RP0910/1100C	£3.00
35	651834-0	SWITCH SP115C RP1100C/UH45/63	£7.20
36	265995-6	TAPPING SCREW 4X18	£1.00
37	911333-7	PAN HD SCREW M6X20 2414B/NB	£1.00
38	417254-6	TRIGGER RP910/1110C	£1.90
39	233288-9	COMPRESSION SPRING 8 UH4570/55	£3.90
40	417255-4	LOCK OFF BUTTON RP910/1100C	£1.00
42	911133-5	PAN HD SCREW M4X18 KP0810C	£1.00
43	417241-5	'COVER RP910/1100C	£3.40
44	152619-2	MOTOR BRACKET COMP RP910/1100C	£31.30
45	816792-9	SCALE PLATE RP910/1100C	£2.40
46	819063-3	LABEL/MAKITA 500 4305HR160DW	£1.00
47	191963-2	CARBON BRUSH CB-303 MT582	£6.00
48	643750-0	BRUSH HOLDER CAP 4100KB HS7611	£1.00
49	417249-9	KNOB COVER RP910/1100C/KP312	£4.60
50	265479-4	HEX HD SCREW M8X35	£1.00
51	417248-1	KNOB RP910/1100C	£4.80
52	323856-7	LOCK PIN RP910/1100C	£1.50
53	231231-2	COMPRESSION SPRING 12 3600B	£1.00
54	153476-1	HALF NUT COMP RP910/1110C	£6.40
54	323858-3	*HALF NUT RP910/1110C	£5.00
55	266012-5	PT SCREW 5X35 HR160D	£1.00
56	285701-3	RETAINER RP910/1100C	£3.90
57	317365-6	RETAINER COVER RP910/1100C	£8.60
58	233072-2	COMPRESSION SPRING 8 BGA450	£1.00
59	417253-8	PUSH BUTTON RP910/1100C	£1.00
60	256437-1	PIN 4 9520NB/9522NB/9526PB	£1.00
61	911133-5	PAN HD SCREW M4X18 KP0810C	£1.00
62	193179-5	COLLET CONE 6.35 ASS'Y	£27.90
63	417246-5	DUST GUIDE CAP RP910/1100C	£1.50
64	417245-7	DUST GUIDE RP910/1110C	£2.20
65	417252-0	'DUST GUIDE RP910/1110C	£2.20
66	233286-3	'COMPRESSION SPRING 11 RP1110C	£1.50
67	265028-7	SHOULDER SCREW M4 LS1019/L	£1.50
68	417257-0	'LOCK LEVER RP910/1100C	£1.00
69	152617-6	BASE COMP RP910/1110C	£55.10
70	259037-6	SELF LOCK 16 RP910/1110C	£1.00
71	413079-6	BASE PLATE RP910/1110C	£5.00
72	912112-6	COUNTERSUNK SCREW M4X10 RP090	£1.00
73	231240-1	COMPRESSION SPRING 7 RP0900/	£1.00
74	265740-9	"*""BRASS"" WINGSCREW M5X15"	£4.40
74	265720-5	THUMB SCREW M5X14 BHR200S	£1.50
75	931202-6	HEX FULL NUT M5 RP0900/AN510	£1.00
76	265333-2	*HEX HD SCRWE M5X16 3620	£1.00
77	931202-6	HEX FULL NUT M5 RP0900/AN510	£1.00
78	265336-6	*HEX HD SCREW M5X40	£1.00
79	213030-4	O RING 8 BTM40/50/HM0871C	£1.00
80	251467-7	'SPECIAL HD SHOULDER SCREW M6	£2.40
81	315931-3	STOPPER RP910/1110C	£4.20
82	931202-6	HEX FULL NUT M5 RP0900/AN510	£1.00
83	265335-8	*HEX HD SCREW M5X28	£1.00
84	231419-4	COMPRESSION SPRING 5 RP0900/M	£1.00
85	216009-4	STEEL BALL 7.1 6906/HR160DWH-	£1.00
86	231419-4	COMPRESSION SPRING 5 RP0900/M	£1.00
87	252644-4	*THUMB NUT M14 RP910/1110C	£1.80
88	233288-9	COMPRESSION SPRING 8 UH4570/55	£3.90
89	233127-3	COMPRESSION SPRING 7 9526PB	£1.00
90	685722-9	SPONGE	£1.00
1001	122609-9	NOZZLE ASS'Y	£6.28
1002	164834-6	STRAIGHT GUIDE MT361/RP0900	£15.72
1003	122615-4	DUST NOZZLE ASS'Y	£8.94
1004	344904-9	TEMPLET GUIDE 12	£4.70
1005	781008-0	Price on application	£20.81
1006	781213-9	WRENCH 8 RP1110C/3600B/3612BR	£3.62
1007	915111-7	*BINDING HD SCREW M4X10	£1.00
1008	821550-0	STACKING CASE TYPE 2 157MM	£60.34
1009	837660-3	INNER TRAY	£11.74
1010	801F27-7	RP0910J INDICATION LABEL	£0.00	Contact Us
1011	801F28-5	RP0910J PLASTIC CASE LABEL	£0.00	Contact Us
5001	654091-9	NON INSULATED TERMINAL GD0801	£1.00
5002	655030-2	Price on application	£8.34
5003	654205-0	'EARTH TERMINAL RP0910	£1.00
5004	654501-6	CONNECTOR P-1.25 MT582/CA5000	£1.00
5005	193178-7	COLLET CONE 8 ASS'Y	£23.92

Accessories for Makita RP0910

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £10.50

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £13.73

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £8.82

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:

Price: £11.00

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:

Price: £11.00

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £13.01

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:

Price: £16.57

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £12.69

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:

Price: £14.90

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:

Price: £14.06

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:

Price: £14.90

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:

Price: £14.90

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £23.19

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:

Price: £27.60

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £32.01

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:

Price: £16.15

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

Price: £17.09

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:

Price: £33.60

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:

Price: £13.73

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

Price: £26.44

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

Price: £27.71

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:

Price: £20.97

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £17.63

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £15.95

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:

Price: £16.57

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:

Price: £19.31

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

Price: £26.44

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:

Price: £38.02

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:

Price: £23.19

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:

Price: £43.05

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:

Price: £36.95

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £39.17

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £28.36

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £42.41

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:

Price: £22.56

Template Guide Bush - 193338-1

(30mm Outside Dia) Template guide bush. Suitable with corresponding worktop jigs.

Price: £16.04

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

Price: £17.30

Buy Replacement Parts and Accessories for the Makita RP0910

40 Compatible Accessories Available!

Accessories for Makita RP0910

Contact Info

Secure Shopping

Our Service

Help And Advice

Your Account

Recently Viewed