Skip to main content

Makita RP2301FC Parts

57 Compatible Accessories Available!

Enhance your Makita RP2301FC with our range of accessories

THUMB SCREW M10X115
£14.35
DEPTH POINTER RP1800
£1.00
WING NUT M10 RP910/1100C
£1.00
NYLON NUT M10 RP1100C/3612BR
£1.00
TAPPING SCREW 4X18
£1.00
REAR COVER RP2301FC
£8.65
*MOTOR HOUSING COMP RP2301FC
£75.45
MOTOR HOUSING COMP RP2301FC
£85.70
CONTROLLER 110V RP2301FC
£60.75
*CONTROLLER 240V RP1800
£53.45
CONTROLLER RP2301F
£63.05
NAME PLATE RP2301FC
£1.00
TERMINAL BLOCK 2P UH45/55/65
£2.15
CORD GUARD 10-90 HS6100/7100
£1.00
CORD GUARD 12-90 110V 9029
£1.75
POWER SUPPLY CORD 2.5-2-4.00
£21.15
POWER SUPPLY CORD 1.5-2-4.0
£23.45
STRAIN RELIEF 110V UK360/HS61
£1.00
STRAIN RELIEF 3612C/5103R/411
£1.00
TAPPING SCREW 4X18
£1.00
COVER RP1800
£1.95
TAPPING SCREW 4X18
£1.00
*PT SCREW 5X75 2414B
£1.00
FIELD 110V 3612C
£37.55
FIELD 240V 3612C
£37.55
BUFFLE PLATE RP1800
£1.95
BALL BEARING VC3211M/3612/C/
£6.25
INSULATION WASHER 3612C
£11.65
ARMATURE 110V RP2301
£119.75
ARMATURE 240V RP
£119.75
FAN 80 RP2301FC
£9.45
COUNTERSUNK HEAD SCREW M4X14
£1.00
BEARING RETAINER RP1801
£3.05
BALL BEARING 6205DDW RP1801
£10.05
TAPPING SCREW 4X18
£1.00
GRIP COVER R RP1801
£6.05
SWITCH LEVER RP1801
£1.95
COMPRESSION SPRING 4 6702D
£1.00
LOCK OFF BUTTON RP1801
£1.85
COMPRESSION SPRING 5 5016NB
£1.00
SWITCH RP1801/3612C
£17.75
PAN HEAD SCRE M6X25 RP2301FC
£1.00
GRIP R PP1801
£7.95
PUSH BUTTON RP1801
£1.00
COMPRESSION SPRING 8 BGA450
£1.00
PIN COLLARED PIN 6 RP1801
£2.85
PAN HD SCREW M4X18 KP0810C
£1.00
COLLET CONE 12.7 3612BR/M3600
£30.84
COLLET NUT RP1801
£5.95
RETAINER COVER RP1801
£9.05
RETAINER RP1801
£3.55
MOTOR BRACKET COMP RP1801
£28.55
PT SCREW 5X35 HR160D
£1.00
HALF NUT COMP RP910/1110C
£6.45
COMPRESSION SPRING 12 3600B
£1.00
PAN HEAD SCRE M6X25 RP2301FC
£1.00
TAPPING SCREW 4X18
£1.00
GRIP COVER L RP1801
£5.75
GRIP L RP1801
£8.35
BRUSH HOLDER CAP 7-18 GA7050/
£1.00
CARBON BRUSH CB-203 3612C/241 (Pair)
£4.05
INDICATION LABEL RP2301FC
£1.00
CT SCREW M4X12 UC3530A/KP0810
£1.00
LED CIRCUIT RP1801
£7.35
TORSION SPRING 15 RP1801
£1.00
SET BOLT M10 3612C
£6.25
LOCK LEVER RP1801
£1.95
PAN HEAD SCREW M5X12 ER2550
£1.00
SILENT POLE RP1801
£1.75
COMPRESSION SPRING 13 RP1801
£2.35
SCREW M10 RP1801
£8.85
CHIP DELFECTOR RP1801
£4.25
'SPECIAL HD SHOULDER SCREW M6
£2.45
O RING 8 BTM40/50/HM0871C
£1.00
+ HEX BOLT M5X20 RP0900/1801
£1.00
+ HEX BOLT M5X14 RP0900/1801
£1.00
STOPPER RP910/1110C
£4.25
+ HEX BOLT M5X20 RP0900/1801
£1.00
STEEL BALL 7.1 6906/HR160DWH-
£1.00
COMPRESSION SPRING 5 RP0900/M
£1.00
THUMB SCREW M5X14 BHR200S
£1.75
COMPRESSION SPRING 7 RP0900/
£1.00
LARGE HARD WASHER 6
£1.00
HEX NUT M6 9564/65CV/DZ&H
£1.00
THUMB SCREW M4X19 MT361/RP090
£2.85
O RING 3 MT361/RBL25/RP1801
£1.00
THUMB SCREW M5X14 BHR200S
£1.75
COMPRESSION SPRING 7 RP0900/
£1.00
'DUST GUIDE RP910/1110C
£2.25
COMPRESSION SPRING 11 RP1801
£2.55
BASE COMP RP1801
£51.15
CAP 14 RP1801
£1.00
LOCK PLATE RP1801
£3.95
*COMPRESSION SPRING 4
£1.00
BASE PLATE RP1801
£24.55
COUNTERSUNK SCREW M4X10 RP090
£1.00
*PIVOT SCREW M5X10 3612C
£3.95
1001 122850-4
DUST NOZZLE ASS'Y
£7.92
1002 266491-7
+PAN HD SCREW M6X135 RP2301FC
£3.55
1003 763803-0
COLLET SLEEVE FOR 1/4" BIT
£8.50
1004 763805-6
COLLET SLEEVE FOR 3/8" BIT
£7.56
1005 781030-7
WRENCH 24
£6.80
1006 941152-7
FLAT WASHER 6 DIN125-A HR3500
£1.00
1007 194732-0
STRAIGHT GUIDE SET
£52.70
1007 194935-6
STRAIGHT GUIDE SET
£47.96
1008 158980-5
KNOB 55 COMPLETE
£12.45
1009 821552-6
STACKING CASE TYPE 4 315MM
£82.82
1010 837647-5
INNER TRAY
£11.74
1011 801E79-2
RP2301FCXJ INDICATION LABEL
£0.00
1012 801E80-7
RP2301FCXJ PLASTIC CASE LABEL
£0.00

The Makita RP2301FC is a powerful 12mm plunge router designed for demanding woodworking applications. With a 2,100W motor, variable speed from 9,000 to 22,000 rpm and up to 70mm of plunge capacity, it combines substantial cutting power with precise depth adjustment. The router also features soft start, constant speed control, an electric brake and twin LED job lights.

With a machine of this size, wear can occur in the motor, bearings, plunge mechanism, collet and base components. If your Makita RP2301FC is not working, has lost power, is making unusual noises or the plunge mechanism is no longer operating correctly, the individual RP2301FC spare parts can be identified from the parts diagram and list above.

Makita RP2301FC Parts Diagram and Parts List

The RP2301FC parts diagram covers the motor and electrical system, handles, plunge columns, base, depth adjustment and router spindle. It is particularly useful when looking for smaller components such as springs, pins, washers, bearings and adjustment parts.

The parts list includes the motor housing, controller, terminal block, field, armature, bearings, carbon brushes, brush holders, power cord, spindle, collet components, plunge springs, side covers, base assembly and base plate.

Some parts are also listed with updated or alternative references, so checking the original part number against the correct RP2301FC diagram is important.

RP2301FC Motor, Armature and Carbon Brushes

The RP2301FC uses a powerful brushed motor with separately identifiable electrical components. The parts information includes 517810-3 armature assembly, 636011-5 field and 643707-1 brush holder, together with the CB203 carbon brush set.

If the RP2301FC is losing power, producing excessive sparking or cutting out under load, the carbon brushes, brush holders, armature and field should be considered. Carbon brushes are wear components and can eventually become too short to maintain reliable contact with the armature.

A motor fault can also produce unusual noise or a noticeable reduction in speed, particularly when the router is working under load. The bearings should be inspected at the same time if there is excessive mechanical noise.

RP2301FC Controller and Electrical Parts

Electronic control is an important part of the RP2301FC, providing variable speed and constant-speed operation. The parts catalogue identifies 620081-4 controller, while other RP2301FC parts information includes 631858-2 controller for particular versions.

The router also uses 654531-7 terminal block, 682505-8 cord guard and 687052-4 strain relief, together with the mains power cord.

If the Makita RP2301FC will not start, the power cord, terminal block, switch, controller, brushes and motor connections should all be checked. Electrical components should be matched to the exact voltage and version of the router.

RP2301FC Collet, Spindle and Router Bit Parts

The spindle and collet assembly are responsible for securely holding the router bit while the motor rotates at high speed. The RP2301FC accepts both 1/2-inch and 1/4-inch shank router bits, with 763622-4 1/2-inch collet cone, 763803-0 collet insert adapter and 763674-5 collet nut identified in the parts system.

If the RP2301FC collet is not gripping correctly, the router bit is slipping or there is excessive movement around the spindle, inspect the collet cone, nut and spindle assembly.

A damaged or contaminated collet can prevent the router bit from being held securely, while wear in the spindle or bearings can result in unwanted movement during operation.

RP2301FC Plunge Mechanism and Depth Adjustment

The plunge mechanism allows the router to be lowered accurately into the workpiece, with the RP2301FC offering up to 70mm of plunge capacity. The parts breakdown contains numerous components associated with this mechanism, including the plunge rods, springs, locking parts, depth pointer and adjustment hardware.

The 125542-4 thumb screw M10x115 assembly and 450946-4 depth pointer are among the identifiable adjustment components.

If the RP2301FC plunge mechanism is stiff, will not lock correctly or does not return smoothly, the plunge columns, springs, guides and locking mechanism should be checked. The machine's linear bearing arrangement is designed to provide smooth movement, so excessive resistance or play may indicate a mechanical problem.

RP2301FC Bearings and Motor Housing

The router's motor and spindle rely on several bearings to support the rotating components. The parts information identifies 211092-6 ball bearing 629DDW and 211380-1 ball bearing 6205DDW, along with the relevant bearing retainers and washers.

If the RP2301FC is making a grinding noise, vibrating excessively or developing movement in the motor or spindle, the bearings should be inspected. Bearing wear can affect the smooth running of the router and can also place additional load on other rotating components.

The motor housing is separately identified, with 158979-0 motor housing complete appearing in the parts information, alongside newer or alternative housing references in other catalogues.

RP2301FC Handles, Covers and Base Parts

The large rubberised handles provide control over the router during operation, while the base supports the machine against the workpiece. The parts breakdown includes handle components, rear cover, side covers, base components and the 158973-2 base complete.

If the RP2301FC base is damaged, the handles have become loose or a cover has been broken, individual housing and base components can be identified from the parts list.

The base assembly also contains numerous smaller springs, pins, knobs, washers and locking components associated with plunge-depth adjustment and operation.

Choosing the Correct Makita RP2301FC Parts

When searching for Makita RP2301FC parts online, check the exact model and voltage before ordering, particularly for the armature, field, controller and power-supply components. Several part numbers have been updated or superseded over the life of the router.

From the RP2301FC motor and carbon brushes to the controller, armature, field, bearings, spindle, collet, plunge mechanism, depth adjustment, handles and base components, the detailed parts list provides a useful reference when identifying the component needed.

Matching the original Makita part number with the RP2301FC parts diagram gives you a reliable starting point when selecting the correct RP2301FC spare parts for your router.

Accessories for Makita RP2301FC

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.
D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £10.50

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.
D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £13.73

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.
D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £8.82

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.
D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £11.00

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.
D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £11.00

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.
D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £13.01

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.
D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:
View full description →
Price:  £16.57

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.
D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £12.69

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.
D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £14.90

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.
D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £14.06

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.
D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £14.90

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.
D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:
View full description →
Price:  £14.90

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings
D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:
View full description →
Price:  £23.19

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.
D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:
View full description →
Price:  £27.60

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.
D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £32.01

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.
D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:
View full description →
Price:  £16.15

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.
D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £17.09

Biscuit jointer set - C152X1/2TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)
D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £33.60

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)
D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £33.60

Two flute cutter 12.7mm diameter - C153DX1/2TC

Two flute cutter 12.7mm diameter X 50.0mm with centre tip for plunge cutting in abrasive metals, softwood, harwood, MDF, plywood and chipboard.
D=1/2 inch D=12.7 mm Cut length=2 inches Cut length=50 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £23.19

Two flute cutter 12.7mm diameter - C153X1/2TC

Two flute cutter 12.7mm diameter X 50.0mm cut for softwood, harwood, MDF, plywood and chipboard.
D=1/2 inch D=12.7 mm Cut length=2 inches Cut length=50 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £14.90

Two flute cutter 12.7mm diameter - C164X1/2TC

Two flute cutter 12.7mm diameter X 63.0mm cut for softwood, harwood, MDF, plywood and chipboard.
D=1/2 inch D=12.7 mm Cut length=2 1/2 inches Cut length=63 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £20.97

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.
D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:
View full description →
Price:  £13.73

Two flute cutter 12mm diameter - C172X1/2TC

Two flute cutter 12.0mm diameter X 63.0mm cut for softwood, harwood, MDF, plywood and chipboard.
D=15/32 inch D=12 mm Cut length=2 1/2 inches Cut length=63 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £20.97

Aquamac 21 Recesser 54.5mm diameter - C207X1/2TC

Aquamac 21 Recesser 46.3 mm diameter. Comes complete with a guide bearing to reduce setting up time and simplify machining operations.
D=46.3 mm D2=34.3 mm C=10.3mm C2=2.7 mm B=28.6 mm OL=90 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £50.19

Intumescent cutter set 10mm x 40mm - C208X1/2TC

Neat cut intumescent cutter set, 40mm diameter X 10mm cut for grooves on door frames for intumescent strips.
D=40 mm C=10 mm B=32 mm E=4 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £38.02

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.
D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £26.44

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.
D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £27.71

Two flute cutter 12.7mm diameter - TR17DX1/2TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 12.7mm diameter X 50.0mm cut.
D=1/2 inch D=12.7 mm C=50 mm OL=93 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £25.92

Two flute cutter 12.7 diameter 12.7mm diameter - TR17X1/2TC

Two flute cutter for a clean finish. 12.7mm diameter X 50.0mm cut.
D=1/2 inch D=12.7 mm C=50 mm OL=94 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £22.04

Two flute cutter 12.7mm diameter - TR18DX1/2TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 12.7mm diameter X 63.0mm cut.
D=1/2 inch D=12.7 mm C=63 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £29.80

Two flute cutter 12.7mm diameter - TR18X1/2TC

Two flute cutter for a clean finish. 12.7mm diameter X 63.0mm cut.
D=1/2 inch D=12.7 mm C=63 mm OL=106 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £25.39

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.
D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £21.51

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.
D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £21.51

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.
Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £20.97

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.
D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:
View full description →
Price:  £17.63

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut
D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £15.95

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut
D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £16.57

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut
D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £19.31

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut
D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £21.51

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut
D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £26.44

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut
D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £38.02

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.
D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £23.19

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.
D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £43.05

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.
D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £36.95

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.
D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £39.17

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.
D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:
View full description →
Price:  £28.36

Bearing guided rebater 12.7mm - TR34X1/2TC

Bearing guided rebater, includes 3 extra bearings (9.5mm, 15.9mm and 19.1mm)
D=35mm C=12.7mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £37.48

Biscuit jointer set - TR35X1/2TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut
D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £42.41

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut
D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £42.41

Two flute cutter 12mm diameter - TR37X1/2TC

Two flute cutter for a clean finish. 12.0mm diameter X 63.0mm cut.
D=12 mm C=54 mm OL=115 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £29.77

Two flute cutter 15mm diameter - TR40DX1/2TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.
D=15 mm C=25 mm OL=63 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £22.56

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.
D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:
View full description →
Price:  £22.56

Intumescent cutter set 10mm x 40mm - TR41X1/2TC

Bearing guided intumescent recesser, 40.0mm diameter X 10.0mm cut.
D=40 mm Cut length=10 mm B=32 mm E=4 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £38.63

Intumescent cutter set 15mm x 40mm - TR42X1/2TC

Bearing guided intumescent recesser, 40.0mm diameter X 15.0mm cut.
D=40 mm Cut length=15 mm B=32 mm E=4 mm Shank Diameter=1/2 inch Includes:
View full description →
Price:  £39.70

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.
View full description →
Price:  £17.30

Router Cutter - TR47X1/2TC

Bearing guided roman ogee, by raising the cutter the top is quickly removed. 25.4mm diameter.
View full description →
Price:  £33.60

This model also has 57 accessories available.

Scroll down to view them.