Skip to main content

MTD 463 Parts (Basic machine - MTD013906)

Chipper Chute
£123.74
Chipper Chute
£123.74
Rivet
£2.13
Flap Chipper Chute.
£30.65
Strip
£6.95
Hhcs:1/4-20:.620:gr5:std
£2.10
Assy-chute
£132.91
Wash:fl:.28id:.74od:.063
£2.02
Chute Support
£46.89
Hhcs:1/4-20:1.25:gr5:spec
£2.54
Chipper Chute Assy
£194.02
Nut:hex:5/16-18:gr5
£1.60
Chute Deflector Assy
£114.76
Scre.hhcs:5/16-18:.875:gr5:std
£7.19
Thumb Screw
£0.00 Not Available
Internal Cotter Pin
£2.24
Shredder Screen
£24.25
Pin
£6.95
Nut:flglk:1/4-20:grf
£1.62
Spacer
£10.99
Flail Housing Assy Rh
£106.68
Flail Housing Assy Rh Red
£106.68
Nut:u:5/16-18
£2.55
Shredder Frame
£0.00 Not Available
Scr:ttsems:3/8-16:1.250:hxlwsh
£6.50
Scre.hhcs:5/16-18:1.50:gr5:std
£10.27
Bell Washer
£0.00
Hex Screw
£4.94
Washer:lock:1/4:regular Duty
£1.99
SCREW
£8.23
Nut:flglk:5/16-18:gr5:sd Lk
£1.75
Screw
£1.85
Brkt:guard:mflr
£8.77
Deflector
£24.39
Screw 5/16 X 3/4 Lg-flat Hd
£5.75
Chipper Blade 24-645/648
£29.18
Nut Hex. Lock
£1.53
Impellor Tapered C/shaft
£576.69
Impeller Assy Comp
£576.69
Impeller Assy Comp
£576.69
Shredder
£41.89
Washer:lock:5/16:regular Duty
£2.04
Blade Flail
£22.10
Flail Blade
£26.70
Roll Pin
£6.41
Clip - Retainer
£6.06
Bolt
£6.10
Washer:lock:3/8:heavy Duty
£3.28
Wash:flat:.406x1.25x.157:ht
£6.31
Cap
£3.66
Wheel Assy 645 Model
£56.18
Wheel
£76.11
Flail Housing Assy Lh
£84.20
Bolt
£4.21
Axle 648 Only
£0.00
Axle 640/645 Only
£0.00
Spacer
£10.99
Wash:flat:.640 X 1.12 X .125
£2.54
Bracket Front Support
£68.78
Back Up Plate
£106.65
Bracket Assy Rr
£68.82
Spacer
£15.54
Comp.spring: .531 Od X 1.75 Lg
£3.59
Compr.spring:.406x.531x1.75 Lg
£3.59
Wash:flat:.385 X.620 X.033
£2.02
Pin:cot:.072 Dia X 1.13 Lg
£1.61
Lock Rod
£28.62
Wash:flat:.330 X.630x.0635
£2.25
Nut:hexlk:5/16-18:gr5:nylon
£3.31
Hhcs:5/16-18:1.00:gr5:std
£6.56
Wash-flat:.330 X 1.25 X.06:ht
£3.11
Collar Hopper
£65.31
Bracket Assy Frt
£99.01
Hopper
£239.78
Screw Hhcs:5/16-18:.75:gr5:std
£1.81
Pin Clevis
£10.62
Pin Shoulder
£11.74
Bag For Shredder Models
£100.25
Bag - Shredder
£100.26
Tamper Plug
£76.69
Engine B&s
£0.00 Not Available
4 Stroke Briggs Engine
£657.43
£0.00 Not Available
B&s Engine
£657.43
Engine B&s
£0.00 Not Available
Elbow
£13.49
Plate Washer .340x.872x.060
£2.35
Wash:sdl:.320 X.93 X.060
£2.13
Nut:jamlk:3/8-16:gr2
£2.89

The MTD 463 is a petrol-powered chipper, shredder and garden vacuum designed for processing garden debris, branches and other suitable organic material. Built around a heavy-duty cutting and shredding system, the machine uses a chipper chute, flail blades, shredder screen, impeller and discharge system to process material efficiently.

If your MTD 463 is not working, is vibrating excessively, struggling to chip material or has developed damage to the chute, blades, impeller or hopper, individual components can be replaced. The extensive MTD 463 parts information covers the cutting mechanism, chipping assembly, discharge system, wheels and structural components.

MTD 463 Parts Diagram

The MTD 463 parts diagram breaks the machine down into several assemblies, including the chipper chute, discharge chute, hopper, wheels, frame and internal shredder mechanism. This makes it easier to identify individual components when carrying out repairs or restoring an older machine.

The parts listings include complete assemblies as well as smaller components such as pins, bolts, washers, nuts, springs, spacers and retaining clips. The operator's manual for the 462–465 series also provides a detailed parts list covering the chipper and shredder assemblies.

The 463 was produced in numerous versions, including 247-463A678, 24A-463A678, 24A-463B678, 24A-462G678 and 24A-452K678, with different production years and specifications. Checking the complete model number is therefore important when ordering MTD 463 spare parts.

463 Chipper Chute and Hopper Parts

The chipper chute directs branches and other suitable material into the cutting mechanism. The parts breakdown includes the chipper chute, chute support, chute flap, chute strip, lower chute assembly and deflector components.

Identifiable parts include 731-1899 chipper chute, 681-0068A chute assembly, 749-1004 chute support, 735-0249A chute flap protection and 781-0633 chute flap strip.

If the MTD 463 chipper chute is damaged, loose or no longer secured correctly, check the chute, support arms, flap and associated fixings. Individual components can often be identified from the diagram rather than replacing the complete chute assembly.

MTD 463 Shredder Screen and Flail Blades

Inside the machine, the shredder assembly uses a screen and flail blades to break down material before it is discharged. These are important wear components and should be inspected regularly.

The parts list identifies the 781-0457 shredder screen and 719-0329 flail blade, along with roll pins, retaining clips, bolts and washers used to secure the cutting components.

If the MTD 463 is not shredding properly, produces excessive vibration or leaves material insufficiently processed, inspect the flail blades, screen and mounting hardware. The operator's manual specifically covers checking and replacing the shredder blade and flail screen.

463 Impeller and Cutting Mechanism

The impeller is a major component of the MTD 463's internal cutting and material-handling system. The parts breakdown identifies the 681-0030 tapered impeller crankshaft assembly, with later references including 681-04096 complete impeller assembly.

This is one of the more substantial components in the machine and works alongside the shredder and flail assemblies. If the MTD 463 impeller is damaged, the machine develops severe vibration or the cutting mechanism does not operate correctly, the impeller and its associated shaft, fasteners and bearings should be inspected.

Because the impeller is a major rotating component, correct assembly and secure fixing are particularly important.

MTD 463 Discharge Chute and Collection Parts

After material has passed through the cutting and shredding system, the discharge assembly directs it away from the machine. The parts listings include the discharge chute, deflector assembly, chute supports, flap and associated hardware.

The parts breakdown includes 681-0095 chipper chute assembly, 681-0094 chute deflector assembly and the corresponding nuts, bolts, washers and retaining components.

If the MTD 463 discharge chute is damaged or blocked, inspect the complete chute arrangement and make sure the deflector and flap components are correctly fitted.

463 Wheels, Frame and Structural Parts

The MTD 463 is designed to be moved around the garden or work area, so its wheels, frame and support components can experience considerable wear. The parts information includes wheel assemblies, tow-bar components, frame fittings, brackets, clevis pins and other hardware.

The 734-1600 wheel assembly is one of the identifiable components in the parts listings. Earlier 463 versions can also include tow-bar tongue and base components, making it important to match the part to the exact model number.

If your MTD 463 is difficult to move, has a damaged wheel or has developed looseness in the frame or tow-bar assembly, check the relevant structural components against the parts diagram.

Selecting the Right MTD 463 Parts

There are numerous versions of the MTD 463, with production years spanning several generations. For example, the parts listings cover 463 machines from the late 1990s through to later 24A-series versions. Components can therefore vary according to the full model and production year.

When looking for MTD 463 parts online, use the complete model number from the machine rather than searching only for "463". This is particularly important for the chipper chute, impeller, cutting components, wheels and frame parts.

From MTD 463 flail blades, shredder screens and impellers to chipper chutes, discharge components, hopper parts, wheels, frame components and the smaller bolts, pins and washers, matching the part to the correct MTD 463 parts diagram makes it much easier to identify the spare required for your machine.