Hitachi O-ring (1ap-20) - 944-486
Original Hitachi part 944486 — O‑ring (1AP‑20). This is the small sealing ring used in the hammer / striker assembly on Hitachi rotary / demolition hammers and is listed in the parts breakdown as O‑RING (1AP‑20).
Fits example models such as DH24PC3, DH24PB3 and DH22PB , DH24DVA , DH25DL and DH36DAL and several other rotary hammers.
Key details you’ll want to know before repair: the 1AP‑20 size corresponds to an inner diameter of about 19.8 mm with a cord / wire (cross‑section) of about 2.4 mm, made from nitrile (NBR) rubber (approx. 70° hardness), and is the sealing ring that sits on the striker / hammer in the gear housing to help form the impact.
If your rotary hammer is losing impact or showing oil / air leakage from the gear / striker area, replacing this original Hitachi 944486 O‑ring restores the proper seal and impact behavior quickly — a compact, direct replacement that’s commonly listed in Hitachi parts lists for the DH24 series.
(Keyword note: this is a specific power tool parts item intended to replace the original Hitachi O‑ring used in the hammer assembly.)
Compatible models this part will fit:
- Hitachi C5YC
- Hitachi CM4SA2
- Hitachi CM4SB
- Hitachi CM4SB2
- Hitachi CM6
- Hitachi DH22PB
- Hitachi DH24DV
- Hitachi DH24DVA
- Hitachi DH24PB2
- Hitachi DH24PB3
- Hitachi DH24PC2
- Hitachi DH24PC3
- Hitachi DH24PD2
- Hitachi DH24PD3
- Hitachi DH24PF
- Hitachi DH24PF3
- Hitachi DH24PM
- Hitachi DH25DAL
- Hitachi DH25DL
- Hitachi DH36DAL
- Hitachi DH36DL
- Hitachi JCM4
- Hitachi JCM4S
- Hitachi NV50AG
- Hitachi NV50AG2
- Hitachi NV90AB2
- Hitachi VB16Y
- Hitachi WH16
- Hitachi CM4