Skip to main content

DeWalt DW100 Parts (DW100 Type 1)

HEX KEY 2.5 MM
£1.92
2 This part is unavailable
Not Available
KNOB
£1.92
WASHER
£1.92
SCREW
£1.92
6 This part is unavailable
Not Available
CIRCLIP
£1.92
10 32940
WHEEL DRIVING
£12.29 Not Available
11 This part is unavailable
Not Available
12 This part is unavailable
Not Available
13 32942
SUPPORT
£1.58 Not Available
14 This part is unavailable
Not Available
15 32970
SPRING
£1.58 Not Available
16 This part is unavailable
Not Available
NUT
£1.92
NUT
£1.92
19 This part is unavailable
Not Available
WASHER
£1.92
SCREW
£1.92
WASHER SPRING
£1.92
SCREW
£1.92
24 This part is unavailable
Not Available
25 This part is unavailable
Not Available
SPRING
£1.92
SCREW
£1.92
28 This part is unavailable
Not Available
29 32419
SAFETY KEY
£1.90 Not Available
30 44430
CAPACITOR
£14.51 Not Available
32 This part is unavailable
Not Available
33 34536
RETAINER
£1.90 Not Available
34 34537
FASTENER
£1.90 Not Available
35 This part is unavailable
Not Available
36 This part is unavailable
Not Available
37 This part is unavailable
Not Available
NUT
£1.88
40 This part is unavailable
Not Available
SCREW
£1.67 Not Available
STRAP
£1.92
NUT
£1.92
RING
£1.92
45 This part is unavailable
Not Available
46 This part is unavailable
Not Available
WASHER
£1.92
BEARING
£11.39
50 This part is unavailable
Not Available
51 This part is unavailable
Not Available
52 This part is unavailable
Not Available
53 This part is unavailable
Not Available
54 34532
KNOB
£2.08
SPRING
£1.92
56 This part is unavailable
Not Available
SCREW
£1.92
SCREW
£1.92
59 32959
POINTER
£1.58 Not Available
BEARING
£3.98
61 32955
PIN
£1.90 Not Available
SCREW.TEMP
£2.08 Not Available
63 This part is unavailable
Not Available
SCREW
£1.92
65 32953
GUIDE BLOCK 45
£2.29
66 This part is unavailable
Not Available
67 32952
GUIDE BLOCK 90
£1.92
68 This part is unavailable
Not Available
69 This part is unavailable
Not Available
70 This part is unavailable
Not Available
71 This part is unavailable
Not Available
72 This part is unavailable
Not Available
SCREW
£0.00 Not Available
74 This part is unavailable
Not Available
NUT
£1.92
KNOB
£1.92
77 This part is unavailable
Not Available
78 This part is unavailable
Not Available
GAUGE
£11.39
80 This part is unavailable
Not Available
81 This part is unavailable
Not Available
83 This part is unavailable
Not Available
SCREW
£2.08 Not Available
BRUSH
£3.98
FOOT
£2.08 Not Available
87 This part is unavailable
Not Available
SCREW
£1.92
SCREW
£1.92
90 This part is unavailable
Not Available
BELT TOOTHED
£22.83 Not Available
92 This part is unavailable
Not Available
SCREW
£0.00 Not Available
94 This part is unavailable
Not Available
NUT
£1.92
WASHER
£1.92
97 This part is unavailable
Not Available
RETAINER
£1.92
99 This part is unavailable
Not Available
100 949729-03
CIRCLIP
£1.92
102 This part is unavailable
Not Available
103 This part is unavailable
Not Available
107 This part is unavailable
Not Available
108 This part is unavailable
Not Available
109 This part is unavailable
Not Available
110 This part is unavailable
Not Available
111 862438-00
KNOB
£1.67 Not Available

The DeWalt DW100 is an older workshop bandsaw designed for accurate cutting with a continuous blade running around the machine's drive and guide wheels. Built as a substantial stationary machine, the DW100 incorporates an adjustable table, blade guides, drive system, safety key and a range of mechanical components that can be replaced individually when worn or damaged.

If your DeWalt DW100 is not working, the blade is not tracking correctly, the drive wheel is slipping or the table or guide mechanism has developed excessive movement, individual DW100 spare parts can help restore the machine. The parts diagram and numbered list above provide a useful reference for identifying the components fitted to the Type 1 machine.

DeWalt DW100 Parts Diagram

The DeWalt DW100 parts diagram contains a large number of individual components covering the drive system, blade guides, table, motor and adjustment mechanisms. This is particularly useful with an older bandsaw because many of the smaller springs, washers, retainers and fixings are difficult to identify from the assembled machine.

The Type 1 parts list includes drive wheels, bearings, springs, safety key, capacitor, carbon brush, table components, blade-guide covers, belt, knobs, shafts and numerous nuts, screws and washers.

Individual components such as the 32940 driving wheel, 44430 capacitor, 863801-00 carbon brush, 123106-00 strap and 123246-00 toothed belt are identified within the parts breakdown.

DW100 Drive Wheel and Belt Parts

The drive system is responsible for transferring power to the bandsaw blade and maintaining consistent blade movement. The DW100 parts information includes the driving wheel, toothed belt, pins, retaining rings and associated bearings and fixings.

If the DeWalt DW100 blade is not moving correctly, the drive wheel and belt should be checked for wear or damage. A worn drive component can affect how effectively power is transferred to the blade and may also contribute to unusual noise or inconsistent operation.

The parts diagram identifies the drive components individually, making it possible to investigate the specific source of a mechanical problem rather than automatically replacing a larger assembly.

DeWalt DW100 Motor and Electrical Parts

The DW100 contains several electrical components associated with the motor and control system. The Type 1 parts breakdown identifies the 44430 capacitor, carbon brush components and other electrical fittings.

If your DW100 is not working, starts intermittently or has developed an electrical fault, these components should be considered alongside the power supply and switchgear.

The Type 1 information identifies 863801-00 as a carbon brush, while the brush assembly also incorporates smaller components such as the brush spring and retaining ring. Wear in the brush system can affect motor performance on an older machine.

DW100 Blade Guide and Adjustment Parts

Correct blade guidance is essential for maintaining an accurate cut. The DW100 parts breakdown includes several components associated with the guide and adjustment mechanisms, including springs, knobs, supports, shafts, retainers and blade-guide covers.

The Type 1 list identifies the 32953 45° block cover and 32952 90° block cover, together with adjustment hardware and smaller mechanical components.

If the DW100 blade is wandering, the cut is becoming inaccurate or the guide mechanism has developed excessive movement, these components are worth inspecting. Worn or damaged guide hardware can affect how consistently the blade tracks through the workpiece.

DeWalt DW100 Table and Workshop Components

The bandsaw table provides the main work surface and can be adjusted for angled cutting. The original DW100 documentation specifies a table adjustment range of up to 45°, making the table and its associated locking components important parts of the machine's operation.

The parts list includes the 863852-01 foot, knobs, washers, screws, retaining components and other fittings associated with the machine's structure and adjustment system.

If the table is difficult to adjust, will not hold its position or has suffered damage, the individual mechanical fittings should be checked against the parts diagram.

DW100 Bearings, Springs and Small Parts

Older workshop machines often require attention to the smaller components that keep the main assemblies operating correctly. The DeWalt DW100 parts breakdown includes several bearings, springs, retaining rings, pins, nuts, washers and threaded fittings.

For example, the Type 1 information identifies 930563-00 and 949719-04 bearings, alongside several different springs and circlips.

These smaller components can be particularly useful when restoring a DW100 that has been dismantled for servicing. Replacing a worn bearing, missing spring or damaged retaining ring may be enough to restore a particular part of the machine without replacing a complete assembly.

Check Your DW100 Type Before Ordering Parts

The available parts information is specifically identified for the DeWalt DW100 Type 1. DeWalt recommends using the exact model and Type number when accessing the correct parts diagram and parts list, as different versions can use different components.

It is also worth noting that DW100 is an ambiguous model designation: DeWalt documentation also exists for a DW100-220 3/8" variable-speed drill. If you are looking for DeWalt DW100 bandsaw parts, make sure the machine is the bandsaw version before ordering.

For the bandsaw, matching the Type 1 identification with the DW100 parts diagram is the safest way to find the correct component. From the drive wheels and toothed belt to the capacitor, carbon brush, bearings, blade-guide components, table fittings and smaller adjustment parts, individual DeWalt DW100 spare parts can help keep this older workshop bandsaw in service.