Skip to main content

DeWalt DWE560 Parts (DWE560 Type 1)

FIELD SA 230V
£25.96
FIELD SA 115V
£44.05
ARMATURE SA
£65.02
ARMATURE SA
£70.83
BEARING
£2.96
BEARING
£3.98
BAFFLE
£1.92
SCREW
£1.92
FIELDCASE SA
£25.96
HANDLE
£2.96
BRUSH HOLDER
£6.52
10 N024448
BRUSH CAP
£1.92
11 N092201
SWITCH
£12.69
SCREW
£1.92
PLASTIC SCREW
£1.92
14 N083601
END CAP
£3.48
SCREW
£1.92
TERMINAL BLOCK
£2.96
17 821070
CORD CLAMP
£1.92
18 N017542
PLASTIC SCREW
£3.98
19 N105376
PROTECTOR
£1.92
SCREW
£1.92
21 N083610
SPRING
£1.92
22 N102412
HOLDER
£1.92
23 N083609
CORD PROTECTOR
£1.92
24 N114591
CORDSET
£30.26
24 N114590
CORDSET (M/PLUG) GB
£24.68
25 N083584
SPINDLE LOCK
£3.48
26 N130051
SPRING
£1.92
27 N177902
GEARCASE SA
£41.21
BUMPER
£1.92
29 N086355
SCREW
£1.92
30 N134472
O RING
£1.92
31 N183366
SPINDLE SA
£20.27
SCREW
£3.48
33 N083599
SPRING
£1.92
34 N083598
GUARD LOWER
£17.89
35 N086628
LEVER
£1.92
SCREW
£1.92
37 N152544
RETAINER
£1.92
38 N112958
INNER FLANGE
£2.96
39 N191811
RUBBER SEAL
£1.92
WASHER OUTER CLAMP
£1.92
SCREW
£2.71
RING
£1.92
43 N112955
LEVER
£1.92
44 N111116
NUT
£3.48
45 N143277
CARRIAGE BOLT
£1.92
PIN
£1.92
47 N136649
SHOE SA
£30.26
48 N116044
WING NUT
£1.92
49 N038133
BOLT
£1.92
50 N094309
SCREW
£1.92
51 N116069
KNOB
£1.92
52 N083612
FENCE
£6.52
53 N170858
SPRING
£1.92
54 N141340
RATING PLATE
£1.92
54 N141341
RATING PLATE
£1.92
55 N106861
CAPACITOR
£2.29
56 N100358
O RING
£1.92
57 N195215
DUST PORT
£11.39
58 N035355
SPANNER
£1.92
59 N179042
BRUSH PAIR 230V
£16.48
59 N179043
BRUSH PAIR 115V
£16.48
800 583534-00
GREASE
£142.11
861 N044228
KITBOX
£55.00
862 605265-00
SPRING CLIP
£12.69

The DeWalt DWE560 is a 1,350W corded circular saw fitted with a 184mm blade and designed for ripping, cross-cutting and bevel cutting in wood and other suitable construction materials. With a maximum cutting depth of 65mm at 90° and a 48° bevel capacity, it is a useful general-purpose saw for workshop and site work.

If your DWE560 has developed a fault, individual DeWalt DWE560 spare parts can often be used to repair the saw rather than replacing the complete machine. The parts range covers everything from motor components and bearings to the spindle, blade guard, base and smaller adjustment components.

DWE560 Parts Diagram and Parts List

The DWE560 parts diagram above shows how the saw is assembled and provides the reference numbers needed to identify individual components. The parts breakdown covers the motor and gearbox, electrical components, upper and lower guards, base assembly and cutting-depth and bevel adjustment mechanisms.

It is important to check the Type number on your saw before ordering. DWE560 parts lists exist for different versions, and components can change between Types. DeWalt's own support information also recommends using the exact Type number when accessing parts diagrams and lists.

DWE560 Motor, Armature and Field

The DWE560 uses a brushed 1,350W motor. The motor section includes the N178802 230V field assembly and N178804 armature assembly, along with the bearings and fieldcase components supporting the motor.

If your DWE560 is not working, has started producing excessive sparks or has lost power under load, the motor components are worth investigating. A worn armature, damaged field or failing bearing can all affect the way the saw runs.

There is also a 115V field reference for applicable versions, so checking the voltage and exact Type is essential before ordering electrical parts.

DWE560 Carbon Brushes and Switch

Because the DWE560 has a brushed motor, the brush system is an important part of its electrical assembly. The parts list includes the N024450 brush holder, N024448 brush cap and associated components.

Worn carbon brushes can cause intermittent operation, reduced motor performance or increased sparking. If the saw cuts out or struggles to maintain power, the brushes and brush holders are worth checking alongside the armature.

The N092201 switch is another key electrical component. A faulty switch can prevent the saw from starting or cause intermittent operation when the trigger is operated.

DWE560 Bearings and Gearcase

The motor and gearbox rely on bearings to keep the rotating components correctly supported. The parts list includes N110359 and 605040-59 bearings, together with the N177902 gearcase assembly.

If your DWE560 is making a grinding or unusual mechanical noise, excessive bearing wear or a problem within the gearcase may be responsible. Vibration or movement around the blade spindle can also indicate that the spindle, bearings or associated gearbox components need inspection.

Replacing the appropriate DWE560 parts can restore the saw without having to replace the complete motor or gearbox assembly.

DWE560 Spindle and Blade Drive

The spindle transfers power from the gearbox to the circular saw blade. The Type 1 parts list includes the N183366 spindle assembly, along with the spindle lock, inner flange, retainer and associated springs and hardware.

The DWE560 uses a 184mm blade with a 16mm bore. If the blade is not running correctly, the spindle has excessive movement or the blade cannot be secured properly, inspect the spindle and its associated components.

The spindle lock is also listed separately, making it possible to replace a smaller component of the blade-changing mechanism where appropriate.

DWE560 Guards and Cutting Mechanism

The DWE560's guard system is an important part of the saw's construction. The parts breakdown includes the N083598 lower guard, N086628 lever, N152544 retainer and associated springs, screws and seals.

The saw also has adjustable cutting depth and bevel settings, with the base and adjustment mechanism allowing the user to set the required cutting position. If the guard is sticking, the adjustment mechanism is damaged or the base is no longer holding its position correctly, the individual components can be identified from the diagram.

DWE560 Housing, Cord and Smaller Parts

Not every repair involves a major component. The DWE560 parts list includes the N086362 handle, 320078-00 terminal block, 821070 cord clamp, N083609 cord protector and N114589 Euro cordset, along with numerous screws, springs and other small fittings.

These smaller DWE560 spare parts can be useful when repairing damage caused by general wear, particularly around the handle, cable entry and external housing.

Finding the Right DWE560 Parts

When searching for DeWalt DWE560 parts, check the model and Type number carefully before ordering. This is particularly important for electrical components such as the field and armature, as different voltage and Type versions are listed.

Whether you need a DWE560 armature, field, carbon brush holder, switch, bearing, gearcase, spindle, blade guard, cord or adjustment component, the parts diagram above can help you identify the correct reference.

Using the correct DeWalt DWE560 spare parts means an older circular saw can often be repaired one component at a time, keeping the machine useful without replacing the entire tool.