Skip to main content

DeWalt DWS774 MITRE SAW Parts (DWS774 Type 1)

Drawings
ARMATURE 230V
£111.66
BEARING
£3.98
BEARING
£2.96
BAFFLE FAN
£1.92
SCREW
£1.92
FIELD 230V
£46.92
FIELD CASE DWS774
£8.45
SCREW
£1.92
BRUSH HOLDER PAIR
£17.89
15 N442752
BRUSH LEAD
£1.92
16 N413668
END CAP
£1.92
SCREW
£1.92
PIN
£4.48
BUSH
£1.92
22 N417784
LEVER
£3.48
PIVOT
£1.92
SCREW
£1.92
SCREW
£1.92
31 N394413
LEVER SA
£3.98
BUSH
£2.29
SCREW
£1.92
34 N422245
SA MOTOR CABLE+CAPACITOR DWS774
£12.69
SWITCH
£12.69
36 N443395
SA XPS+WIRING DWS774, SERVICE
£55.00
37 N433608
CORD PROTECTOR
£1.92
38 N416554
COVER
£9.98
39 N543840
CARRIER
£70.83
WASHER
£1.92
NUT
£1.92
SPRING
£1.92
LOCKING KNOB
£6.52
CONNECTOR
£1.92
CORD PROTECTOR
£2.29
52 N456928
SCREW
£2.29
53 N443393
SPINDLE SA
£58.33
ADJUSTER
£1.92
62 N566679
HANDLE COVER
£24.68
SCREW
£1.92
PLUG
£1.92
65 N402337
SPRING TORSION
£1.92
ROLLER
£2.29
LOCKING RING
£1.92
69 N437811
RING
£1.92
70 N482904
WASHER INNER CLAMP
£5.35
71 N380081
WASHER OUTER CLAMP
£3.98
SCREW
£1.92
73 N437182
DUST DEFLECTOR
£3.98
WASHER
£1.92
76 N437704
BRAND LABEL
£1.92
77 N546962
SA KIT GUARDS DWS774, SERVICE
£34.10
101 N443388
BASE SA
£111.66
102 N493151
SCALE
£9.98
103 330045-49
SCREW
£1.92
104 760298-01
INSERT
£1.92
105 868777-00
FOOT
£1.92
106 860092-07
NUT
£1.92
107 949705-01
WASHER
£1.92
109 N493430
ROTARY TABLE
£117.80
110 N312779
PIN
£6.52
111 N381932
EXTENSION
£6.52
112 N412530
EXTENSION
£6.52
113 N294299
CLAMP SA
£19.30
115 330045-05
SCREW
£1.92
116 860074-01
WASHER
£1.92
117 868707-01
BUSH
£1.92
118 868708-00
BALL
£1.92
119 868778-00
SPRING
£1.92
120 N299799
BUSH
£1.92
121 N315680
LEVER LOCK
£11.39
122 N380813
TABLE INSERT
£1.92
123 098105-03
SCREW
£4.48
124 N368581
BACK FENCE
£20.27
126 868682-00
HEX KEY
£1.92
127 N427024
SPANNER
£3.98
128 860093-08
SCREW
£1.92
129 860083-02
NUT
£1.92
130 N443391
RAIL SA
£70.83
131 N430464
RETAINER
£1.92
132 N430472
O RING
£1.92
133 N430463
WASHER
£1.92
134 330065-06
SCREW
£1.92
135 N137455
BRACKET
£1.92
136 N137454
BUSHING
£1.92
138 N443390
SUPPORT BRACKET
£41.21
139 860079-02
CIRCLIP
£1.92
140 943030-00
O RING
£1.92
146 N401760
SHAFT
£5.35
147 618198-00
SCREW
£1.92
148 N422257
BUSH
£1.92
149 860092-05
NUT
£1.92
150 861475-00
BEARING
£3.98
153 N402913
SPRING TORSION
£8.45
154 949894-12
SCREW
£1.92
160 N437177
BEVEL SCALE
£1.92
161 N395328
SHAFT
£4.48
163 153666-00
SCREW
£1.92
164 N368598
SEGMENT
£70.83
165 N447409
SCREW
£1.92
166 861840-03
LEVER
£7.80
167 868680-00
INSERT
£4.48
169 933168-00
WASHER
£1.92
170 612008-00
SCREW
£1.92
217 610707-00
WARNING LABEL
£1.92
281 N098063
LENS
£1.92
800 93488-00
GREASE
£17.89

The DeWalt DWS774 is a 216mm slide mitre saw with XPS cross-cut positioning, designed for accurate cutting of timber in professional and workshop environments. With a 1,400W motor, 4,500rpm no-load speed and a 48° mitre and bevel capacity, it is a compact but capable saw that is regularly used on site and in the workshop.

When an older DWS774 develops a fault or suffers wear, individual components can often be replaced rather than replacing the complete saw. Our DeWalt DWS774 spare parts information covers the motor, electrical system, sliding mechanism, table, fence, bearings and other mechanical components. The parts diagram and numbered list above can be used to identify the correct part.

DeWalt DWS774 Parts Diagram and Parts List

The DWS774 parts diagram provides a detailed breakdown of the saw, showing the individual components used throughout the motor, base and cutting assemblies.

The parts list includes armatures, fields, bearings, brush holders, switches, cables, levers, bushes, pivots, shafts, springs, table components, rails, supports and numerous screws and fasteners. For an older saw where a small component has worn or gone missing, the diagram can be particularly useful for identifying the correct DWS774 part.

DWS774 Motor, Armature and Field Parts

If your DeWalt DWS774 is not working, the motor and electrical system are worth investigating. The saw uses a brushed motor, with separate armature, field, brush holder and associated components listed for the machine.

For Type 1 machines, the N443398 armature is used on 230V versions, while N443399 is listed for 115V machines. The corresponding field assemblies are N443396 for 230V and N443397 for 115V.

The motor assembly also contains bearings and a baffle fan. If the saw is noisy, losing power, producing excessive sparking or failing to start, these components may need checking.

DeWalt DWS774 Carbon Brushes and Switch

The DWS774 carbon brushes are replaceable wear components within the motor. The Type 1 parts list includes the N443400 brush holder pair together with the brush leads and other components associated with the motor.

The N092201V switch is also listed separately. A worn switch can cause intermittent operation or prevent the saw from starting, while worn brushes can contribute to reduced motor performance or increased sparking.

Because the DWS774 is available in different electrical versions, always check the voltage and type number before ordering electrical DWS774 replacement parts.

DWS774 Sliding Mechanism and Table Parts

The sliding mechanism is an important part of the DWS774 design, allowing the 216mm blade to cut wider workpieces than a fixed-head mitre saw. The parts breakdown includes shafts, bushes, bearings, rails, supports, levers and adjustment components associated with this mechanism.

The saw table also contains a range of individually listed components, including the N443389 rotary table, table insert, rear guide, angle scale, locking lever and other adjustment parts.

If the saw develops excessive movement, becomes difficult to slide or no longer locks securely at the required angle, checking these mechanical components against the parts diagram can help locate the worn component.

DWS774 Base, Fence and Support Components

The base and fence assemblies provide the support needed for accurate cutting. The DWS774 parts information includes the base, rotary table, rear guide, supporting brackets, extensions, shafts, bushes and various locking components.

Individual DeWalt DWS774 parts such as the N381932 and N412530 extensions can be replaced separately, while smaller components including springs, O-rings, washers and retaining rings are also identified within the parts list.

This can make it possible to repair a damaged or worn section of the saw without replacing the complete base assembly.

DWS774 Handles, Levers and Mechanical Parts

A large number of smaller mechanical components contribute to the movement and adjustment of the DWS774. These include levers, pivots, bushes, shafts, springs, pins, knobs, screws and locking components.

Parts such as the N417784 lever, 760296-01 pivot and N394413 lever assembly are included in the Type 1 parts information. These components can be particularly relevant when an older DWS774 has developed looseness or difficulty with its adjustment mechanisms.

Check Your DWS774 Type and Voltage

The DeWalt DWS774 is available in both 110V and 230/240V versions, and the exact type number should be checked before ordering parts. DeWalt's parts system uses the model and type number to identify the correct diagram and parts list.

Before ordering DWS774 spare parts, check the rating plate on your saw and compare the complete type number with the parts diagram above. This is especially important for the armature, field, brush holder, switch and other electrical components.

With the correct DeWalt DWS774 parts, individual worn or damaged components can be replaced to help extend the useful life of this compact 216mm slide mitre saw.