DeWalt DCN930N Parts (DCN930N Type 1)
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 1 | NA543950 | CLAMSHELL SET | £46.92 |
|
| 2 | NA610859 | END CAP SA | £44.05 |
|
| 3 | NA611530 | HOOK SA | £8.45 |
|
| 4 | N791558 | COVER | £1.92 |
|
| 5 | NA257998 | BUTTON LOCK-OFF | £1.92 |
|
| 6 | NA232544 | SCREW | £1.92 |
|
| 7 | 330019-13 | SCREW | £1.92 |
|
| 8 | 330019-41 | SCREW | £1.92 |
|
| 9 | 330019-24 | SCREW | £1.92 |
|
| 10 | NA381864 | BOLT | £1.92 |
|
| 11 | N432422 | SCREW | £1.92 |
|
| 12 | N034374 | SUPPORT | £4.48 |
|
| 13 | NA363409 | BARREL | £17.89 |
|
| 14 | N536265 | CLIP | £1.92 |
|
| 15 | NA259474 | NO MARK TIP | £1.92 |
|
| 16 | N587227 | SPRING | £1.92 |
|
| 17 | 330045-43 | SCREW | £1.92 |
|
| 18 | N822845 | HOLDER | £1.92 |
|
| 19 | N089554 | MAGNET | £9.98 |
|
| 20 | N868561 | DAMPER | £3.48 |
|
| 21 | NA206021 | BUMPER | £17.89 |
|
| 22 | N851295 | RETAINER | £1.92 |
|
| 23 | 324006-16 | SCREW | £4.48 |
|
| 24 | NA090285 | MOUNT | £1.92 |
|
| 25 | N481219 | BRUSH | £2.96 |
|
| 26 | NA044152 | MAGAZINE INTERFACE | £60.53 |
|
| 27 | NA044115 | INSERT | £38.81 |
|
| 28 | NA610917 | NOSE SA | £34.10 |
|
| 29 | N477247 | SCREW | £1.92 |
|
| 30 | N666247 | SCREW | £1.92 |
|
| 31 | N506404 | RETAINING PLATE | £1.92 |
|
| 32 | 650974-00 | CONNECTOR | £1.92 |
|
| 33 | NA167655 | CABLE CLAMP | £1.92 |
|
| 34 | N855838 | FRAME | £44.05 |
|
| 34 | NA597232 | FRAME | £44.91 |
|
| 35 | N086806 | SPRING TORSION | £1.92 |
|
| 36 | NA094894 | LEVER RELEASE | £1.92 |
|
| 37 | N113536 | SCREW | £1.92 |
|
| 38 | N400753 | SCREW | £1.92 |
|
| 39 | N192671 | CAP | £1.92 |
|
| 40 | N088831 | BUMPER | £3.48 |
|
| 41 | N088833 | WASHER | £1.92 |
|
| 42 | N590966 | RAIL | £8.45 |
|
| 43 | N275023 | SPRING | £17.89 |
|
| 44 | N088832 | SCREW | £4.48 |
|
| 45 | NA018403 | BUMPER | £1.92 |
|
| 46 | N855834 | RETAINER | £3.48 |
|
| 47 | N624713 | LIFTER | £1.92 |
|
| 48 | NA296374 | HOLDER | £4.48 |
|
| 49 | NA011038 | DRIVER | £103.07 |
|
| 50 | NA165657 | DAMPER | £1.92 |
|
| 51 | NA309197 | SCREW | £1.92 |
|
| 52 | NA292207 | PLATE | £4.48 |
|
| 53 | 330065-06 | SCREW | £1.92 |
|
| 54 | N515453 | CAP | £3.48 |
|
| 55 | NA145281 | LENS | £1.92 |
|
| 56 | N388602 | LEAF SPRING | £1.92 |
|
| 57 | NA044621 | SPACER | £1.92 |
|
| 58 | NA044620 | SPACER | £1.92 |
|
| 59 | NA044628 | SCREW | £1.92 |
|
| 60 | 609932-00 | SCREW | £1.92 |
|
| 61 | NA066222 | MOUNT | £4.48 |
|
| 62 | N929607 | SIDE EXTRUSION | £73.49 |
|
| 63 | NA215695 | LINER | £9.98 |
|
| 64 | N061664 | HEX KEY | £1.92 |
|
| 65 | NA375375 | END CAP | £3.98 |
|
| 66 | NA610862 | PUSHER | £15.04 |
|
| 67 | NA044317 | SPRING SA | £5.35 |
|
| 68 | N720305 | PLUNGER | £4.48 |
|
| 69 | N657871 | SOLENOID ASSEMBLY | £34.10 |
|
| 70 | NA412352 | SPRING | £1.92 |
|
| 71 | NA477635 | MOUNT | £3.48 |
|
| 72 | 330019-10 | SCREW | £1.92 |
|
| 73 | NA036268 | MOUNT | £5.35 |
|
| 74 | NA036466 | BEAM | £30.26 |
|
| 75 | N309239 | SPRING | £9.98 |
|
| 76 | NA601321 | CAP | £14.83 |
|
| 76 | N825150 | CAP | £15.04 |
|
| 77 | N631775 | BUSH | £1.92 |
|
| 78 | NA091358 | PIN | £3.48 |
|
| 79 | NA098846 | PIN | £2.96 |
|
| 79 | NA610869 | PIN | £24.50 |
|
| 80 | NA610867 | CARRIER SA | £34.10 |
|
| 81 | NA601319 | CARRIAGE | £38.68 |
|
| 81 | NA266115 | CARRIAGE | £38.81 |
|
| 82 | NA382827 | PLATE | £1.92 |
|
| 83 | 854004 | WASHER | £1.92 |
|
| 84 | NA089688 | WASHER | £1.92 |
|
| 85 | NA385042 | SCREW | £1.92 |
|
| 86 | NA495396 | MOTOR SA | £180.67 |
|
| 87 | NA495397 | CONTROL MODULE SA | £189.23 |
|
| 88 | NA495400 | CARRIAGE SA | £163.51 |
|
| 89 | NA495402 | CONTACT BAR | £55.00 |
|
| 90 | NA392960 | RATING PLATE | £1.92 |
|
| 91 | NA392958 | LABEL | £1.92 |
|
| 92 | NA190909 | LABEL | £1.92 |
|
| 95 | NA392956 | LABEL | £1.92 |
|
| 96 | NA392957 | LABEL | £1.92 |
|
| 97 | NA392955 | LABEL | £1.92 |
|
| 98 | NA392954 | LABEL | £1.92 |
|
| 890 | N859056 | HOOK SA | £2.96 |
|
| 998 | 000000-99 | Part number or price not available | £0.00 |
|
| 999 | 02300117-00 | LOCTITE | £6.52 |
|
Keep your DeWalt DCN930N 18V XR brushless framing nailer working reliably with the correct DeWalt DCN930N spare parts and replacement components. The DCN930 is a 33° framing nailer designed for first-fix applications such as timber framing, stud work and roof battens. It fires angled nails from 50mm to 90mm and features a brushless motor, improved magazine system, tool-free depth adjustment and bump or sequential firing modes.
If your DCN930N is not working, failing to fire, jamming, misfiring, not driving nails fully or experiencing problems with the magazine or depth adjustment, individual replacement parts can help restore the nailer without replacing the complete tool.
DCN930N Parts Diagram and Parts List
The DeWalt DCN930N parts diagram and parts list above show the individual components used throughout the framing nailer. The available Type 1 breakdown contains a large selection of replacement components, from screws, springs and retainers through to the driver, nose assembly, magazine interface and housing.
DeWalt uses the model and Type number when identifying parts, so check the Type shown on your nailer before ordering. This is particularly important for internal assemblies where parts can be specific to a particular version.
Driver, Firing Mechanism and Bumper Parts
The driver is one of the most important components in the DCN930N firing mechanism. DeWalt has specifically developed a tougher driver blade for this generation of framing nailer, helping it drive nails consistently into timber.
The Type 1 parts list includes the NA011038 driver, together with dampers, bumpers, retainers, holders, lifters, springs and other components surrounding the firing mechanism.
If the DCN930N is firing but not driving nails correctly, leaving nails proud or producing inconsistent results, the driver and associated firing components are worth inspecting.
Magazine and Nail Feeding Parts
The DCN930 uses a new magnesium magazine and an improved loading system designed to make nail loading quicker and more reliable. It is compatible with 33° angled nails from 50mm to 90mm and is designed for both paper-tape and wire-welded nail types.
The DCN930N replacement parts listing includes the NA044152 magazine interface, NA044115 insert, frame assemblies, rail, holder, retaining plate and various springs and mechanical fittings.
If the DCN930N is not feeding nails, inspect the magazine, interface, rail, pusher mechanism and associated springs for damage or obstruction.
Nose, No-Mar Tip and Contact Trip Parts
The nose assembly is responsible for positioning the nailer against the workpiece and forms an important part of the firing system. The DCN930 also has a nose design optimised for toe-nailing and is supplied with a no-mar tip.
The Type 1 parts diagram includes the NA610917 nose assembly, NA259474 no-mar tip, barrel, support, magnet, spring and related fittings.
If the DCN930N contact trip is not working correctly, or the nose has been damaged through regular site use, check these components before replacing larger assemblies.
Depth Adjustment and Release Components
The DCN930N features an extended depth-adjustment wheel, allowing the user to control how deeply nails are driven into the material. It also incorporates controls for switching between bump and sequential firing modes.
The parts breakdown includes release levers, springs, caps, holders and other components associated with the adjustment and firing controls. If the DCN930N depth adjustment is not working, inspect the adjustment mechanism for damage or loose components.
Brushless Motor and Electrical Parts
The DCN930N uses a brushless 18V XR motor, so there are no conventional carbon brushes to replace. DeWalt designed the brushless drive system to provide the power required to drive nails up to 90mm while maintaining cordless operation.
If your DCN930N has power but is not firing, first check the battery and basic operating conditions before investigating the internal drive and electronic systems. The Type 1 parts listing also contains electrical connectors, cable clamps and other smaller components associated with the tool.
Housing, Hooks and Small Replacement Parts
The DCN930N is designed for regular use on building sites, and external components can become damaged or worn through handling. The parts list includes the NA543950 clamshell set, NA610859 end cap assembly, NA611530 hook assembly, lock-off button, covers, screws, supports, springs and other small fittings.
Replacement DeWalt DCN930N parts can therefore be useful for repairing physical damage as well as faults within the firing and nail-feeding mechanisms.
Find DeWalt DCN930N Parts Online
When searching for DeWalt DCN930N parts online, check the exact Type number on your nailer before selecting a replacement. DeWalt's parts system uses the model and Type number to identify the appropriate diagram and parts list.
From the driver and firing mechanism to the magazine, nose assembly, no-mar tip, depth adjustment, brushless drive system, housing and smaller springs and retainers, the parts listings above make it easier to identify the correct DCN930N spare parts for your repair.