Skip to main content

DeWalt DCMPH566 Parts (DCMPH566 Type 1)

CLAMSHELL PAIR
£30.26
PIVOT
£1.92
TRIGGER
£1.92
SPRING
£1.92
PIVOT
£1.92
SPRING
£1.92
ACTUATOR
£3.98
SWITCH SA
£106.89
SCREW
£1.92
SCREW
£1.92
12 N727014
POLE PIECE SA
£19.30
13 N695769
PIVOT
£6.52
14 N695770
PIVOT
£6.52
15 N702834
CAP
£5.35
16 N692632
FELT
£1.92
17 N683090
RING
£3.48
18 N695743
BUTTON
£5.35
19 N695742
PIN
£1.92
20 N719624
SPRING
£1.92
SCREW
£1.92
22 N715112
WASHER
£1.92
23 N714562
SLEEVE
£2.96
24 N753977
SCREW
£1.92
25 N461154
NUT
£1.92
26 N677751
COVER
£12.69
27 N677752
COVER
£12.69
28 N875115
MOTOR SA
£77.57
PLATE
£3.48
30 N778918
BOLT
£1.92
31 N603748
SPACER
£1.92
32 N687442
BLADE SA
£92.45
33 N767711
SHEATH
£4.48
CHARGER 18V
£77.38
35 N394624
BATTERY 18V - 5.0AH - 90WH
£189.23
801 N502343
STRAP
£9.98

Find the replacement components you need for your DeWalt DCMPH566 cordless pole hedge trimmer. Whether your hedge trimmer has stopped working, is struggling to cut properly or has a damaged component, replacing the individual part can often restore the tool without the expense of replacing the complete machine.

Our DeWalt DCMPH566 parts diagram and parts list above make it easier to identify individual components and find the correct replacement. Parts are available for different areas of the machine, from the cutting assembly and motor through to the pole, pivot mechanism, housing and smaller mechanical components.

DeWalt DCMPH566 Parts Diagram

The DCMPH566 parts diagram provides a detailed view of the individual components that make up the hedge trimmer. Each component can be matched to the numbered parts list, helping you identify the correct DeWalt part number before placing an order.

This is particularly useful when you know which area of the machine is causing a problem but are unsure of the exact name or part number. Locate the component on the diagram, then use the corresponding listing above to find the replacement.

Remember to check the model and Type number carefully, as parts can differ between versions of the same DeWalt tool.

DeWalt DCMPH566 Replacement Parts

A wide range of DeWalt DCMPH566 replacement parts can be required over the working life of the hedge trimmer. Common components include the motor, blade assembly, switch, trigger, pole sections, pivot components, housings, covers, buttons, springs, pins, screws and other smaller parts.

Replacing a single worn or damaged component can be a practical way of extending the life of your DCMPH566. Instead of replacing the complete hedge trimmer, identifying the failed component and sourcing the appropriate spare can get your existing tool back into service.

DCMPH566 Hedge Trimmer Not Working?

If your DeWalt DCMPH566 is not working, there are several components worth checking depending on the symptoms. A trimmer that will not start could have an issue with the switch, trigger, motor or associated electrical components. If the motor runs but the blades are not operating correctly, attention may need to be given to the cutting assembly or mechanical drive components.

Damage around the adjustable cutting head can also affect the operation of the tool. Broken or worn pivot components, housings, pins and other fittings can prevent the head from positioning or locking correctly.

The parts diagram can help you work backwards from the problem to identify the relevant replacement component.

DeWalt DCMPH566 Blade & Cutting Parts

The cutting assembly is one of the most important areas to consider when repairing a DCMPH566 hedge trimmer. If the blades have become damaged or a component within the cutting assembly has worn, individual replacement parts may be available rather than requiring a complete replacement tool.

When looking for DCMPH566 blade parts, use the diagram to identify the precise component required. Matching the part number is important, particularly where several visually similar components are used within the cutting head.

DeWalt DCMPH566 Motor, Switch & Electrical Parts

Electrical faults can cause a DCMPH566 to stop operating altogether. Depending on the fault, replacement parts such as the DCMPH566 motor, switch or trigger components may be required.

If your hedge trimmer has stopped suddenly, checking the relevant electrical and motor components against the parts diagram can help establish which part needs replacing. Always identify the exact DeWalt part number before ordering to ensure compatibility with your particular machine.

Find DeWalt DCMPH566 Parts Online

Whether you need a small spring, pin or screw, a replacement housing component, pole part, cutting component, motor or switch, the DeWalt DCMPH566 parts list above provides a straightforward way to find the required spare.

Search using the DeWalt part number if you already know it, or use the DCMPH566 parts diagram to identify the component first. With the correct part number, you can order the replacement component you need and get your DeWalt hedge trimmer back to work.