Skip to main content

DeWalt DCMST561P1 Parts (DCMST561P1 Type 2)

GEARCASE COVER
£12.69
GEARCASE SA
£17.89
PLATE LOCK
£3.48
SPOOL
£24.68
POLE PIECE
£7.80
GUARD SA
£12.69
MOTOR SA
£51.66
COVER SA
£17.89
POLE PIECE
£7.80
10 N746857
LATCH
£19.30
11 N721005
ACTUATOR
£1.92
12 N787701
HANDLE SA
£19.30
13 N857643
BUTTON
£2.96
14 N857645
TRIGGER
£1.92
HOUSING SA
£60.53
16 N877389
WIRE HARNESS
£34.10
17 N784811
WIRE HARNESS
£4.48
18 N784892
WIRE HARNESS
£11.39
WIRE HARNESS
£12.69
21 N877343
HOUSING HANDLE
£16.48
26 N718170
GUIDE
£1.92
PIN
£1.92
28 N746415
SPRING
£1.92
29 N086775
SCREW
£1.92
30 N703719
CLAMP
£1.92
LEAF SPRING
£1.92
33 N703704
SPRING
£1.92
SCREW
£1.92
SCREW
£1.92
WRENCH SPECIAL
£1.92
54 747329
SCREW
£1.92
55 N849706
CLAMP
£1.92
SCREW
£1.92
WASHER
£1.92
821 N862947
RATING LABEL
£0.00
866 N394627
BATTERY 18V - 5.0AH - 90WH
£189.23
871 NA007574
CHARGER
£77.38

Keep your DeWalt DCMST561P1 18V XR brushless strimmer working properly with the correct DeWalt DCMST561P1 spare parts and replacement components. With a 36cm cutting swath, variable-speed control, high and low speed settings and a Quick Load bump-feed system, the DCMST561 is designed for clearing grass, weeds and overgrowth efficiently. Its folding shaft also makes the trimmer easier to transport and store.

If your DCMST561P1 is not working, cutting out, losing power, failing to feed line or suffering damage around the cutting head, shaft or handle, individual replacement parts can help get the trimmer back into use.

DCMST561P1 Parts Diagram and Parts List

The DeWalt DCMST561P1 parts diagram and parts list above show the individual components used on the strimmer. The DCMST561 is available in different versions, so checking the exact Type number on your machine is important before ordering. DeWalt's parts system uses the model and Type number to identify the correct drawing and parts.

The parts breakdown includes the motor, gearcase, trigger and electrical components, cutting guard, spindle lock, shaft components, handle and smaller springs, pins and fittings.

Brushless Motor and Gearcase Parts

The DCMST561P1 uses a brushless 18V XR motor, so there are no conventional carbon brushes to replace. If the trimmer has a charged battery but is not running correctly, the motor, electronic control system and gearcase are worth investigating.

The Type 1 parts listing includes the NA408401 motor assembly and N720623 gearcase assembly, together with the pole piece and other internal components. Because the motor is brushless, replacing the appropriate motor or electronic assembly is different from repairing a traditional brushed garden tool.

Trigger, Switch and Electrical Parts

If your DCMST561P1 is not working when the trigger is pressed, the trigger, switch mechanism and wiring should be checked. The parts breakdown includes the N703260 trigger, 90600458 switch and 90608663-01 wire harness, along with actuators, springs and covers.

The variable-speed trigger allows the user to control cutting performance, while the high/low speed setting provides additional control over power and runtime. A fault with the trigger or associated electrical components can therefore affect how the trimmer responds during use.

Spool, Line and Cutting Head Parts

The cutting head is exposed to constant contact with grass, weeds and debris, making the spool and line-feed components some of the most frequently handled parts of the trimmer. The DCMST561 uses a 2mm twisted line and Quick Load bump-feed system, allowing line to be advanced and reloaded without the lengthy process associated with some conventional spool systems.

If the DCMST561P1 line is not feeding, the spool, bump mechanism and cutting-head components should be inspected for damage or incorrect assembly. Replacement cutting-head components and associated mechanical parts can be identified from the relevant parts listing.

Guard and Spindle Components

The cutting guard protects the operator while the trimmer is in use and helps keep the cutting area contained. The DCMST561 parts breakdown includes the N773299 guard assembly, together with the N718170 guide and 90607066 spindle lock.

If the guard has been damaged or the DCMST561P1 cutting head is not turning correctly, inspect the guard, spindle and gearcase components for damage before replacing larger assemblies.

Folding Shaft and Handle Parts

The folding shaft is one of the defining features of the DCMST561, allowing the trimmer to be made more compact for storage and transportation. The handle and shaft also contain several smaller components that can become damaged or worn with repeated use.

Replacement DCMST561P1 parts include the handle assembly, rubber components, pins, covers, actuators and springs. The Type 1 breakdown identifies the 90613418-01 handle assembly, 90602632 rubber components and 90608944 pin, alongside other shaft and handle fittings.

Housing, Springs and Small Replacement Parts

Garden tools often rely on numerous small components to keep the main assemblies securely in place. The DCMST561P1 parts list includes leaf springs, pins, covers, actuators, screws and other fittings that can be replaced individually.

These DeWalt DCMST561P1 replacement parts can be particularly useful when repairing physical damage or restoring a well-used trimmer where the motor and main cutting mechanism remain serviceable.

Find DeWalt DCMST561P1 Parts Online

When looking for DeWalt DCMST561P1 parts online, check the exact Type number on your trimmer before ordering. This is especially important for motor, gearcase and electrical components, as different versions can use different parts.

From the brushless motor and gearcase to the trigger, wire harness, guard, spindle lock, handle, folding-shaft components and cutting-head parts, the listings above make it easier to identify the correct DCMST561P1 spare parts for your repair.