DeWalt DWD024 Parts (DWD024 Type 1)
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 1 | N044179 | CLAMSHELL SET | £24.68 |
|
| 2 | N044183 | FIELD SA | £24.68 |
|
| 2 | N044182 | FIELD SA | £25.96 |
|
| 3 | 605040-55 | BEARING 608 | £12.69 |
|
| 4 | 464292-00 | DEFLECTOR | £1.92 |
|
| 5 | 584925-02 | CHUCK 13MM | £12.69 |
|
| 6 | 330034-07 | CHUCK KEY | £1.92 |
|
| 7 | 658934-00 | SELECTOR | £1.92 |
|
| 8 | 658859-00 | SELECTOR | £1.92 |
|
| 9 | 326467-00 | DETENT | £1.92 |
|
| 10 | N013010 | SEAL | £1.92 |
|
| 11 | N015397 | PLUG | £1.92 |
|
| 12 | N044184 | SWITCH SA | £17.89 |
|
| 12 | N044187 | SWITCH SA | £16.48 |
|
| 13 | N017542 | PLASTIC SCREW | £3.98 |
|
| 14 | 821070 | CORD CLAMP | £1.92 |
|
| 15 | N016548 | CAPACITOR | £3.98 |
|
| 16 | 401751-00 | CORD PROTECTOR | £1.92 |
|
| 17 | 330061-07 | CABLE SA | £30.75 |
Not Available
|
| 17 | 330060-28 | CORDSET | £24.68 |
|
| 18 | 065288-02 | HOLDER | £1.92 |
|
| 19 | 330065-31 | PLASTIC SCREW | £1.92 |
|
| 20 | N110921 | RATING PLATE | £1.92 |
|
| 20 | N110922 | RATING PLATE | £1.92 |
|
| 22 | N044327 | HANDLE SIDE SA | £8.45 |
|
| 23 | 940357-00 | DEPTH STOP | £17.89 |
|
| 24 | N036617 | RUBBER SEAL | £1.92 |
|
| 25 | N036618 | RUBBER SEAL | £1.92 |
|
| 26 | N435939 | SEAL | £1.92 |
|
| 101 | N044176 | SPINDLE SA | £17.89 |
|
| 102 | N043932 | ARMATURE SA | £38.81 |
|
| 102 | N034418 | ARMATURE SA | £37.39 |
|
| 103 | N044177 | PLATE SA | £12.69 |
|
| 104 | N022040 | BRUSHBOX SA | £6.52 |
|
| 104 | N034423 | BRUSHBOX SA | £4.48 |
|
| 105 | N022039 | BRUSHBOX SA | £6.52 |
|
| 105 | N034422 | BRUSHBOX SA | £7.80 |
|
| 106 | N087159 | BRUSH PAIR 230V | £8.45 |
|
| 106 | N087228 | BRUSH PAIR 115V | £3.98 |
|
The DeWalt DWD024 is a corded percussion drill designed for drilling in wood, metal and masonry. With a 13mm chuck, variable speed up to 2,800 rpm and a percussion rate of up to 47,600 blows per minute, it is a compact drill suited to a wide range of general-purpose applications.
As with any frequently used corded drill, components inside the DWD024 can eventually wear. From carbon brushes and bearings to the chuck, switch and motor components, finding the correct DeWalt DWD024 spare parts can allow an otherwise useful drill to be repaired rather than replaced.
DWD024 Parts Diagram and Parts List
The DWD024 parts diagram above provides a detailed view of the individual components used inside and around the drill. The parts list covers the motor, spindle, chuck, electrical components, housing, bearings, selectors and smaller fittings.
The DWD024 has been produced in different configurations and with different Type numbers, so checking the model and Type marked on your drill is important. DeWalt uses the Type number to identify the correct parts diagram and parts list for a particular version.
DWD024 Armature, Field and Motor Parts
The DWD024 uses a conventional brushed motor, with the armature and field forming the main motor assembly. Parts information for the Type 1 model includes the N034418 armature assembly and N024935/N016107 field assemblies, depending on the particular version.
If your DWD024 is losing power, running roughly or producing excessive sparking, the motor components are worth investigating. A worn armature or damaged field can affect the drill's ability to maintain speed, particularly when drilling under load.
Bearings supporting the motor are also listed separately, making it possible to address wear in the rotating assembly without automatically replacing the complete drill.
DWD024 Carbon Brushes and Electrical Parts
Because the DWD024 has a brushed motor, its carbon brushes are an important service component. The brush system transfers electrical current to the rotating armature and gradually wears during normal use.
Worn brushes can cause DWD024 starting problems, intermittent operation, reduced power or increased sparking. Brush holders, springs and associated electrical components should be checked as part of the diagnosis.
The N016354 switch is another important component. If the drill will not start, cuts out while being used or responds inconsistently to the trigger, the switch and wiring should be inspected along with the brushes and motor.
DWD024 Chuck and Spindle Parts
The DWD024 is fitted with a 13mm chuck, allowing it to accept a wide range of drill bits and accessories. Parts information includes the 584925-02 13mm chuck and N025374 spindle assembly, together with the chuck key and associated components.
If the DWD024 chuck is slipping, will not hold a drill bit securely or has developed excessive movement, replacing the chuck may restore the drill's ability to grip bits correctly.
The spindle is also important if there is unusual movement or noise around the front of the drill. Checking the spindle and supporting bearings can help identify the source of mechanical problems.
DWD024 Gears and Bearings
The drill's internal gearing transfers power from the motor to the spindle while also supporting the percussion mechanism. Bearings help keep the rotating components correctly aligned.
If your DWD024 is making a grinding noise, vibrating excessively or becoming unusually rough during operation, inspect the bearings and internal drive components. A worn bearing can affect both smooth running and the alignment of the spindle.
The parts diagram makes it easier to identify individual DWD024 parts rather than assuming the complete gearbox or motor needs replacing.
Percussion Mechanism and Selector Parts
One of the key features of the DWD024 is its percussion function, which allows the drill to be used for masonry applications as well as conventional drilling.
The parts list includes selector components such as the 658934-00 and 658859-00 selectors, along with the detent and other associated fittings. If the drill is no longer switching correctly between drilling and percussion modes, these components are worth checking.
A problem with the selector does not necessarily mean the entire drill needs replacing, particularly when the motor and main mechanical components remain in good condition.
DWD024 Housing, Cable and External Components
The housing protects the internal components while providing the mounting points for the switch, motor and other assemblies. The parts breakdown also includes the side handle, depth gauge and various seals and screws.
For a Type 1 DWD024, parts include the 662236-00 housing assembly, 939794-02 side handle, 940357-00 depth gauge, 821070 cord clamp, 401751-00 cord protector and N092189 cord set.
These smaller DWD024 spare parts can be useful when repairing damage to the cable, housing or drilling accessories.
Finding the Correct DWD024 Parts
When looking for DeWalt DWD024 parts, check the exact model and Type number before ordering. This is particularly important for electrical components, as field and armature references can vary between versions and voltages.
Whether you need a DWD024 armature, field, carbon brush, switch, chuck, spindle, bearing, selector, cord, housing or smaller component, the parts diagram above provides a useful reference for identifying the correct part.
With the right DeWalt DWD024 spare parts, many common areas of wear can be dealt with individually, helping to keep this versatile percussion drill in service for longer.