Dremel 8220 Parts (F 013 822 000)
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 2 | 2610005460 | Motor | £27.69 |
|
| 4 | 2610021281 | Electronic Assembly | £33.34 |
|
| 8 | 2610022231 | Label | £2.33 |
Not Available
|
| 23 | 2610013854 | Nose | £2.33 |
|
| 24 | 2610005471 | Guide Lever | £1.00 |
|
| 25 | 2610013397 | Screw | £1.00 |
|
| 26 | 2609110537 | Clip | £1.00 |
|
| 27 | 2610005472 | Spring Cap | £1.00 |
|
| 28 | 2610005473 | Suspension Loop | £2.05 |
|
| 31 | 2610014582 | Clamping Nut | £2.05 |
|
| 32 | 2615110480 | Collet | £3.27 |
|
| 650 | 2610930692 | Chuck Wrench | £2.33 |
|
| 652 | 2607336757 | Battery Pack | £34.97 |
Not Available
|
| 653 | 2607225633 | Charger | £41.02 |
|
| 801 | 2610005470 | Housing Assembly | £13.34 |
|
| 802 | 2610004610 | Locking Pin | £2.57 |
|
| 803 | 2610011204 | Spare Part | £1.00 |
|
The Dremel 8220 is a cordless rotary multi-tool designed for detailed cutting, sanding, grinding, engraving, polishing and other precision work. Powered by a 12V lithium-ion battery, it has a fully variable speed range of up to 35,000 rpm, an EZ Twist nose cap for quick accessory changes and a compact design that makes it suitable for both workshop and DIY applications.
If your Dremel 8220 is not working, has developed a problem with the motor, switch or accessory holder, individual components can sometimes be replaced instead of replacing the complete tool. Our Dremel 8220 spare parts information helps you identify the components associated with the tool and match them to the correct version.
Dremel 8220 Parts Diagram and Parts List
The Dremel 8220 parts diagram is particularly useful when repairing a cordless rotary tool because many of the internal components are small and difficult to identify by appearance alone.
The 8220 incorporates the motor and drive assembly, variable-speed controls, battery connection, shaft lock, collet and nose-cap components. The tool also has an integrated wrench in the EZ Twist nose cap, allowing accessories to be changed without a separate spanner.
When looking for Dremel 8220 parts, use the diagram and the identification information on your tool to make sure the component belongs to the correct version.
Dremel 8220 Motor and Electrical Parts
The motor is the main working component of the 8220 and operates from the removable 12V lithium-ion battery. The tool uses a separate on/off switch and variable-speed control, allowing the speed to be adjusted according to the application.
If your Dremel 8220 has stopped working, cuts out during use or will not respond when switched on, the electrical system should be investigated. Battery connection components, switchgear, internal wiring and the motor assembly can all be relevant when diagnosing a fault.
The 8220 is a cordless tool, so there is no mains power cable to replace. This makes the battery connection and internal electrical components particularly important when investigating a tool that appears completely dead.
Dremel 8220 Shaft, Collet and Nose Cap Parts
The front of the tool contains the components that transfer the motor's rotation to the accessory. The 8220 uses a collet system for holding rotary-tool accessories, with the shaft lock allowing the collet nut to be tightened and released.
The EZ Twist nose cap incorporates a built-in wrench, making accessory changes quicker while retaining the familiar Dremel collet system.
If the accessory is not being held securely, the collet, collet nut, shaft-lock mechanism or nose-cap components should be inspected. Damage or wear in this area can affect how accurately an accessory runs.
Dremel 8220 Battery and Charging Parts
The Dremel 8220 battery is a removable 12V lithium-ion pack. Different 8220 kits were supplied with different quantities of batteries and charging equipment, but the tool itself is based around the same cordless platform.
Dremel's UK information lists the 8220 with a 12V battery, 2.0Ah capacity and charging times of around one to one-and-a-half hours depending on the kit and charger. The tool also includes a battery status indicator to show the remaining charge.
If your Dremel 8220 battery is not charging, check the battery, charger and electrical contacts before assuming that the rotary tool itself has developed a fault.
8220 Speed Control and Operating Components
The 8220 has fully variable speed control, with Dremel listing a range from 5,000 to 35,000 rpm on current UK specifications. A separate on/off switch allows the selected speed setting to be retained when the tool is switched off and on again.
Problems with the speed control, switch or associated internal components can therefore affect how the tool starts and operates. If the motor runs but the speed cannot be adjusted correctly, the control components are worth investigating.
The 8220 also incorporates a motor brake that stops the accessory quickly after the tool is switched off.
Identify Your Dremel 8220 Before Ordering Parts
The Dremel 8220 was sold in several kits and article-number configurations, including F0138220JB, F0138220JG, F0138220UN and F0138820JL. These numbers identify different package configurations rather than simply representing different accessory selections, so it is important to use the identification information from your actual tool when looking for individual components.
For example, Dremel's documentation identifies the 8220 as F013822079 for one UK/EU article configuration, while other 8220 versions carry different order numbers.
Before ordering Dremel 8220 spare parts, check the rating plate and any available article or type number on the tool. This is especially important for electrical, motor, battery and internal components.
With the correct identification, the Dremel 8220 parts diagram can help narrow down the component you need, whether you are repairing the motor, switch, speed control, shaft, collet or another part of this versatile cordless rotary tool.